Size unknown (photo's show when it was up) - Bought 5 years ago from a dairy farm - Current owner had it professionally dismantled and removed but has never put it up themselves - C/w all bolts, sides, steps and built in stirrer - Approx size is 4.5m high (4 panels)

Marked 1 - Portequip double sided sheep creep feeder - 2.4m long x 1.6m wide - Needs attention as has rust damage and bent at one end - Trough has holes in it

Marked 2 - Portequip double sided sheep creep feeder - 2.4m long x 1.3m wide - Needs attention as has 3 bent legs and some rust damage

Marked 3 - Portequip double sided sheep creep feeder - 2.2m long x 1.3m wide - Needs attention as has 2 bent legs and rust damage

Rubber floor - Galvanised - C/w winch & headstock - Side opening

Very little use, like new - Only selling as bought a clamp

Good condition

C/w timber skirt - 6.5' with 5'' round posts

Marked 2 - Used - Worked when taken down

Marked 3 - Used - Worked when taken down

Marked 4 - Used - Worked when taken down

Marked 5 - Used - Worked when taken down

Marked 6 - Used - Worked when taken down - Slight crack in plastic

Marked 7 - Used - Worked when taken down - Slight crack in plastic

Marked 8 - Used - Worked when taken down

Marked 9 - Used - Worked when taken down

Marked 10 - Used - Worked when taken down

Marked 11 - Used - Worked when taken down

Marked D - Used - Worked when taken down

Marked E - Used - Worked when taken down - Slight crack in plastic

Marked A - Used - Worked when taken down

Marked B - Plastic - Used - Worked when taken down - It is missing the ball float and threaded bung

Marked C - Plastic - Used - Worked when taken down

C/w timber skirt - 6.5' with 5'' round posts

C/w timber skirt - 6.5' with 5'' round posts

C/w timber skirt - 6.5' with 5'' round posts

C/w timber skirt - 6.5' with 5'' round posts

C/w timber skirt - 6.5' with 5'' round posts

C/w timber skirt - 6.5' with 5'' round posts

C/w timber skirt - 6.5' with 5'' round posts

C/w timber skirt - 6.5' with 5'' round posts

C/w timber skirt - 6.5' with 5'' round posts

Dished bottom - Originally used for mixing wet mix pig feed but has not been used for that purpose for a long time

Has been used for pig feeding - 5.5hp single phase motor with starter - Working when last used but not been used for several years

Heavy duty - 1 x 15' - 2 x 13'6 - Some wear but still fully functional - Solid floor - Genuine reason for sale due to upgrade - Mechanical loading available - No lorry access available on site.

Selection of equipment for assistance with foot trimming cows feet.

Approximately 5-6 years old - Little use - C/w weigh scales - Sliding door - Head scoop & bar - Forklift access - Fully side access doors - Galvanised floor - Charger included. - Vendor no longer keeping livestock

New - Never used - C/w instruction book and charging cable - Vendor no longer keeping livestock

Vendor no longer keeping livestock

Galvanised - Usable condition - Vendor no longer keeping livestock

Marked 1 - Used - Worked when taken down - Slightly cracked but still works

Has 12v self contained hydraulic system with no need for external power - Will automatically catch and holds lambs, ewes or rams with its magic eye technology - Good kit for drenching, tail docking, feet and more - Three way shedding at the front - Space for weigh bars underneath if required

Galvanised - C/w lid - 10' long - Forklift tine lifting eyes - Trough has some rot

Single calf - C/w buckets and hay racks and wall brackets - Come apart in sections - 1 panel has slight damage - Marked 1-4

Single calf - C/w buckets and hay racks and wall brackets - Comes apart in sections - Marked 5-8

Manual yoke - Scales are in the shed - Sides open to access - Heavy locking crush - Race not included

Consists of 3 x 8' long curved sheeted panels - 1 x 8' backing gate - 2 x 7' long sheeted panels - 1 x 4' sheeted gate - 1 x sliding gate - 4 x fixing frames - 12 x pins - Crush not included

C/w plumbing - No holes

Split metal corner

Spares or repairs - Good working condition - 6' x 2 - Loading available - Lorry at the location - Lorry size 8 wheeled

Spares or repairs - Trough 8' 6'' x 4' - Loading available - Lorry at the location - Lorry size 8 wheeled

128cm long, 80cm wide, 42cm high - Solid and sound - No assistance is available with loading and must be removed within 10 days of the sale end

Marked 8 - Mains powered - C/w case - Working - This lot is part of a genuine dispersal due to bereavement. All lots are available to view & collect by appointment with the vendors.

Marked 15 - Manual yoke - Chequre plate floor - Tubar weigh head (support frame needs some TLC) - Full side access (3 panels each side) - Solid, well built crush in good order for age - This lot is part of a genuine dispersal due to bereavement. All lots are available to view & collect by appointment with the vendors.

Marked 16 - Adjustable rump access - Good trough although thin in places - Fully galvanised - Pallet fork slots - This lot is part of a genuine dispersal due to bereavement. All lots are available to view & collect by appointment with the vendors.

Marked 17 - C/w weigh bars & Tru-Test weigh head (EW5i) - Chequer plate floor - C/w rump bar - Manual yoke - Very tidy, had little use - Full width sliding lid - This lot is part of a genuine dispersal due to bereavement. All lots are available to view & collect by appointment with the vendors.

Marked 18 - Sliding lid - Trough appears solid but some corrosion in it - This lot is part of a genuine dispersal due to bereavement. All lots are available to view & collect by appointment with the vendors.

Marked 20 - Weigh function needs some TLC but does work - Two wheels & handles - Solid - This lot is part of a genuine dispersal due to bereavement. All lots are available to view & collect by appointment with the vendors.

Marked 21 - No weigh function - Two wheels & handles - This lot is part of a genuine dispersal due to bereavement. All lots are available to view & collect by appointment with the vendors.

C/w salter weigh scales - Solid/Strong metalwork - Working - This lot is part of a genuine dispersal due to bereavement. All lots are available to view & collect by appointment with the vendors.

New & unused - No plumbing parts included - Single sided

New & unused - No plumbing parts included - Single sided

New & unused - No plumbing parts included - Single sided

New & unused - No plumbing parts included - Single sided

New & unused - No plumbing parts included - Single sided

New & unused - No plumbing parts included - Single sided

New & unused - No plumbing parts included - Double sided

New & unused - No plumbing parts included - Double sided

New & unused - No plumbing parts included - Double sided

New & unused - No plumbing parts included - Double sided

New & unused - No plumbing parts included - Double sided

New & unused - No plumbing parts included - Double sided

New & unused - No plumbing parts included - Double sided

New & unused - No plumbing parts included - Double sided

New & unused - No plumbing parts included - Double sided

New & unused - No plumbing parts included - Double sided

New & unused - No plumbing parts included - Double sided

New & unused - No plumbing parts included - Double sided

Foil sealed bags of Herbal Ley Seed - Tonic, Burnet, Aurora, Sheep's Parsley, Yarrow, Leo, Virgo, Puna ll Chicory, Endure

C/W foot trimming kit - Suits smaller cows, was originally used with a Friesian dairy herd in the 1990's/2000's - Galvanised - Good condition - Chequer plate floor - All foot trimming attachments present - Winding handle to lift hip/leg requires attention at the rear of the crush - Yoke works well - Has brackets welded on to accommodate Tru-Test MP1010 Load Cells - Additional brackets welded on rear to join hurdle on - This lot must be collected wihtin 10 days of the sale closing

Odd hole but plenty of life left.

Extendable legs - Forklift eyes - Trough has some rust holes

C/w ballcock and plumbing - C/w IBC fitting

C/w ballcock and plumbing - C/w IBC fitting - C/w brackets

All new & opened - Out of date (2022-2023).

1 x 1 litre - 1 x 2.5 litre - 1kg of copper sulphate (unopened)

Back & 2 sides present - Front panel missing.

Approx 28 in total

Spares or repairs - No front panel - 2' high x 5' long (sides) - 2' high x 3' 2'' long (back)

Marked as F

Marked as 12 - Working when taken down

Marked as 13 - Working when taken down

C/w plumbing

Good condition, with some minor bends - 2 approx 14' long - 2 approx 15' long

Good condition

New and unused

New and unused