C/w PTO shaft - Lights working - C/w working electric weigh display - Serial No: 2274 - 16 cubic meters capacity - 4 blades are missing but remaining blades are in good used condition - Tyres all in good condition - Has not been used this year - Had new weigh bar sensors installed 2 years ago

Hydraulic vari width - Knock on points - Shear bolt - Good straight plough ready to go to work

Serial No: 604104 - 6m working width - Hydraulic folding - Good set of galvanised 8mm tines with none broken or missing - C/w Opico Air 8 seeder - Electric controls - Tank agitator - C/w calibration tray/charts, operators manuals and wiring for tractor etc - Seeder is newer than harrows - Used this season and worked well

Serial number: C1867 - C/w PTO shaft - Grass conditioner - Cutting width of 2.8m - Two new skids fitted this year - Many new nylon conditioner tines fitted - Bed oils checked - New PTO guard fitted - Good skirt - C/w spare set of blades and manual - Worked well when last used - Loading available

SN: 1051 - Lights working - C/w PTO shaft - Working electrical weigh display - Could do with new blades - Has crack on side walls - Bough as a back up machine but never needed to use it - Now for sale as planning on purchasing a new one.

Serial number: 11492 - 800/65 R32 Tyres - 11,000 litre pump - Hydraulic brakes - hydraulic changeover - Swivel hitch - C/w PTO shaft - Lights and brakes working

Believed to be 1980's - 1.2m head working width - 4.5m maximum reach - Cables controls - C/w PTO shaft - J flails - Loading available

Mounted - Good working order - C/w PTO shaft

3 point linkage - Good working order

C/w PTO shaft - Good working order - Loading available

C/w PTO shaft - Lights and brakes not working - Good condition for age - No rust holes - Can be worked by a small tractor

3 point linkage - In working order

Working order when removed in December 2025 for farm sale

2013 Pottinger Novacat H ED Mower Conditioner - 10' cutting width - Serial No: VBP00021003001264 - Good condition - Used this season - Can be transported upright or straight behind - C/w PTO shaft

4' head working width - 5.5m maximum reach - 3 point linkage - C/w PTO shaft - Lights working - Joystick control - T flails - Serial No: S114694 - Vendor has owned for last 6 years - Can be loaded onto a car trailer - Runs well - For sale due to the vendor buying a newer machine with more reach

Year, make and model unknown - No loading available

Has done light work and been on same farm most of its life - Always dry stored - C/w PTO - Last used 2 years ago - Good working order - 3.2 metres working width

DP 8R Auto reset - Serial No: 614321016 - Good working order - Used this year - Hose and few worn part replaced

400kg - Hydraulic side shift - Side tilt - Forward & backwards tilt - Pipes present - Spool controls - Free fall action - Sale due to it genuinely being surplus to requirements, winding back.

23,358 bale count - Only selling due to upgrade - Been used this season - Approx 2m pick up hitch with crop press rollers - C/w PTO & control box

As new - 8ft cut - Cut less than 100 acres by a retiring farmer

New PTO guard recently - Spare tips & star joints - 12'' auger - Spare auger included

12m working width - Blob marker - Not tested - Electric box included - Working order - Used recently - Hydraulic lifting booms - Holds 1000L

3 point linkage mounted - Good condition - 15 ton ram

Comes with spares

9' wide - All tips present - Old but usable

3 point linkage mounted - 6'6'' wide - Good rubbers

3 point linkage mounted - PTO shaft requires new guard - Working when last used

Tines all present - Tyres holding air - PTO intact - Usable condition

Spiral log splitter with PTO shaft - Working when last used in the Winter

8' roller and frame - Good rings

C/w discs & skims - 1 mouldboard has been welded - Depth control free

C/w discs and skims

Barn stored - Original condition

3 point linkage - No PTO guard

6'' rollers - C/w PTO shaft and guard - Working order

For quad or compact tractor - Disc - Been dry stored - Control linkage will need freeing off - Will need minor recommissioning as it has been in dry stored for some time - Sold as seen

In frame (total width 9') - Believed Twose - Water filled (empty) - Not used for 10 years - Buyer will need to load themselves - This lot is part of a genuine dispersal on behalf of a deceased estate and the farm is being sold. - Please note that much of the machinery equipment has not been used for many years and the farm has no capability of loading heavy or large lots.

Total width 7'6'' - C/w side wheels - 3 point linkage - All tines present - This lot is part of a genuine dispersal on behalf of a deceased estate and the farm is being sold. - Please note that much of the machinery equipment has not been used for many years and the farm has no capability of loading heavy or large lots.

C/w front bar - Approx 12' width - This lot is part of a genuine dispersal on behalf of a deceased estate and the farm is being sold. - Please note that much of the machinery equipment has not been used for many years and the farm has no capability of loading heavy or large lots.

Last used 3 years ago - C/w PTO - One tine broken otherwise all present - Put away in working order - This lot is part of a genuine dispersal on behalf of a deceased estate and the farm is being sold. - Please note that much of the machinery equipment has not been used for many years and the farm has no capability of loading heavy or large lots.

Spares or repairs - Wooden frame (approx 5' wide) - 2 vintage wheels are not attached - Vintage wheels are marked 'Tucker, Hatherleigh' and 42'' diameter (mainly wooden and showing woodworm) - This lot is part of a genuine dispersal on behalf of a deceased estate and the farm is being sold. - Please note that much of the machinery equipment has not been used for many years and the farm has no capability of loading heavy or large lots.

9 legs - 3 point linkage - This lot is part of a genuine dispersal on behalf of a deceased estate and the farm is being sold. - Please note that much of the machinery equipment has not been used for many years and the farm has no capability of loading heavy or large lots.

Spares or repairs - 100 gallon tank - Engine not currently working - C/w spot spray lance

Unknown of age - Working width is 5m - Transport width is 2.77m - No damage to the frame - All in good working order - Can go straight to work - All rings complete - Loading is provided

SN: 202000612017 - Loading available - 1.35m working width - Has only done approx 3-4 hours work from new

Water filled (currently empty) - Recent new wooden bearings - In frame (8 1/2' wide total) - Only being sold as vendor has bought a lead and following roller - Used this year

Not used for 2 years - Working order - No stand or rear gates - C/w PTO

Electric control - Used last year - Please note it does need some attention as hood needs bolting/welding on the ram seal on the head (otherwise in running order) - 1.3m head - Only being sold as vendor has bought a bigger hedge trimmer

Last used a year ago but run up so in working order - New belt this year - C/w PTO - Only being sold as bought a flail topper

Last used approx 5 years ago - No pipes - Working order - Tyres 30% tread with perishing - 1600 gallon

Used this year - Straight - Metalwork is usable

2 drum mower - Mows 6' width - Good condition - Skirts good - Slight crack on hood - Bought but never used by present owner

Manual adjustment of mast and tilt angle - 22kg weight - Hydraulic ram is dry no leaks - Forklift available for loading

C/w grass seed spreader tines - Barn stored - Oiled up ready for use - PTO shaft present but requires new cover

Good condition - Was restored some years ago - Sack truck not included

Been stored indoors - Comes with PTO shaft and control box

1 tyre soft - Used last season

C/w PTO shaft - New belt at front - C/w some spares

Marked 9 - C/w PTO shaft - Not used in recent years but was working when put into storage - This lot is part of a genuine dispersal due to bereavement. All lots are available to view & collect by appointment with the vendors.

Marked 13 - Reasonably good order - Adjustable width - This lot is part of a genuine dispersal due to bereavement. All lots are available to view & collect by appointment with the vendors.

In good working order - Will wrap round or square bales - Manual controls all working fine - 750mm wrap - Loading arm goes up and down no problem and can be adjusted to size of bales - Has had a small repair in past does not affect use at all - Wrapper bed spins fine as shown in video and tips the bales off fine - No leaks on any rams - Have got a control box to make it automatic - Control box is untested as current owner has never used this so it's untested but comes with the wrapped

Solid frame. - On ring hitch.

Good solid set done very little work. - Solid frame and good set of chains.

In good working order - Solid top with no holes - Good skids - Has brand new PTO fitted - Has good new blades fitted - Good support straps - Ready to be put straight to work

Mole valley farmers PTO driven saw bench - In working order - C/w new belts - Has sliding table top to put the log on to the blade - Blade has all its teeth

Cast bench - PTO driven belt drive

All good bearings - New chains about 20 loads ago - All working

Hydraulic lid - All working - Good bearings - Could do with some patching

C/w control box - Please note needs re-lining - Used this year and mechanically sound - Only being sold as bought a newer Keenan feeder wagon

Hydraulic - Used recently - Working order but does have slight oil leak on spool valve - 3 point linkage

Spares or Repairs - Slimline 1000 (typed) - Only being sold spares or repairs as it has no NSTS certificate and has small oil leak on the centre ram - Current vendor used it this year & did 500 acres without any issues, so is in working order - 21 metre boom - 1,000 litre tank - C/w control box - C/w PTO

C/w transport trailer - Bought by current vendor 2 years ago but they have never used it, so working condition unknown

Spares or Repairs - Year 2008 - Twin disc - C/w weight ceus and variable rate - C/w 3 extra sections to hopper - Last used 3 years ago and was in working order then - Only being sold as spares or repairs because it has not been used for 3 years - C/w control box - C/w PTO - C/w rollover canopy

11 legs - Tines all good - Shear bolt gone in one leg - Good and strong - Can be loaded

Solid wheels - 9' cut - Gearboxes good - PTO shaft good - Runs okay but tub damaged could be repaired or break for spares

C/w PTO - Working order (used on 19/09/2026) - One tine holder missing - C/w rear crumbler - No holes in bed - Tines have some wearing metal left - C/w levelling bar

C/w PTO shaft - Solid skids - Solid tub - Heavy duty solid topper

Fitted with 24m spread discs - OM 18-24 discs - Boarder control kit - Lights present

3 Point linkage - C/w hydraulic top link and mast has adjustable legs so regardless of length of post machine will always sit on the ground legs adjust independently so if working on sloping ground the legs can be set at different heights so machine sits stable. - Loading available

Marked 46 - Solid tub - C/w PTO shaft - No loading available - 6' cut - This lot is part of an unreserved clearance sale due to ill health and the sale of the property. - All lots should be collected on Monday 19th October between 10am-3pm or Friday 23rd October between 8am-12noon with no alternative collection days or times available. - There is no mechanical loading assistance and buyers must load themselves in all cases.

Marked 47 - 3 disc coulters - Depth wheel - No loading available - This lot is part of an unreserved clearance sale due to ill health and the sale of the property. - All lots should be collected on Monday 19th October between 10am-3pm or Friday 23rd October between 8am-12noon with no alternative collection days or times available. - There is no mechanical loading assistance and buyers must load themselves in all cases.

In working order - Serial Number: 135983

Some weld repairs on linkage framework - Working order - C/w PTO shaft - Hydraulic folding - Solid tub

Working order - Dent at the back but does not effect use - No holes, some surface rust

Spares or repair - 2,200 gallon capacity - Nearly new 23.1-26 tyres that are both holding air, needs new bearing seals - C/w PTO shaft - Lights and brakes not working

Done minimal work since having new bearings and new 150hp impeller

Was running when last used but needs a new battery and throttle cable - Minimal use since buying new

Serial No: 15206 - Has disc coulters - No manual vari-width - NO hydraulic vari-width - No previous welds or repairs - One mouldboard cracked, another well worn - Disc spins but seized so will not twist side to side

Has some welds on mouldboards, one cracked - One disc coulter missing

Manual boom fold - 12m width - Hydraulic lift - self levelling - Induction/wash tank - 1000L capacity - Lights untested - Electric control box - PTO guard intact - Usable condition

240v - Working order when last used - Flat belt - Has been used to fill log trailer - Approx 8' elevation - Spare belt included

Single furrow turnover plough - Been used as garden ornament

C/W rear gates and PTO shaft (needs new guard) - Would need approx 10 new tines - Some perishing to tyres

Tyres holding air, some perishing - PTO guard intact - All tines present - Both gates present - Working order

Working order - Would benefit with replacement brushes

C/W PTO shaft - Good working order - Adjustable height

Working order - C/W electric motor - 13AMP - 2 flat tyres

Approx 6' long x 18'' round - iron can be removed if not wanted