C/w control box - Please note needs re-lining - Used this year and mechanically sound - Only being sold as bought a newer Keenan feeder wagon

Spares or Repairs - Slimline 1000 (typed) - Only being sold spears or repairs as it has no NSTS certificate and has small oil leak on the centre ram - Current vendor used it this year & did 500 acres without any issues, so is in working order - 21 metre boom - 1,000 litre tank - C/w control box - C/w PTO

C/w transport trailer - Bought by current vendor 2 years ago but they have never used it, so working condition unknown

Manual boom fold - 12m width - Hydraulic lift - self levelling - Induction/wash tank - 1000L capacity - Lights untested - Electric control box - PTO guard intact - Usable condition

240v - Working order when last used - Flat belt - Has been used to fill log trailer - Approx 8' elevation - Spare belt included

Single furrow turnover plough - Been used as garden ornament

C/W rear gates and PTO shaft (needs new guard) - Would need approx 10 new tines - Some perishing to tyres

Tyres holding air, some perishing - PTO guard intact - All tines present - Both gates present - Working order

Working order - Would benefit with replacement brushes

C/W PTO shaft - Good working order - Adjustable height

Working order - C/W electric motor - 13AMP - 2 flat tyres

Approx 6' long x 18'' round - iron can be removed if not wanted

Approx 5' 6'' long x 18'' round

Spares or repairs - Tank capacity 800 litre - Working width 12 - Mechanical loading is available - Lorry access a the location - Maximum lorry size 8 wheeled

Spares or Repairs

Owned from new, approx 10 years old - Working order - Barn stored - Tyres holding air - Jack legs - Hydraulics in working order - Used until recently - Crane will detach & fit on 3 point linkage

Bale trailer/Lorry conversion - 22' bed length - Lights present & working - 9t carrying capacity (capable of carrying 14 bales of silage) - Oil brakes & working - C/w front & rear lades - C/w strap tie downs - New floor fitted August 2026 - Tyres in average condition - C/w 2 spare wheels & a spare bale lade

New body built on - Good strong ram - Removable drop sides & tailgate

C/w front and back bale lades - Solid metal floor - Brakes and lights work - Used this summer - 12.5 - 15.3 tyres - Recently been painted

6' wide - C/w front and rear lades - Wooden floor (solid) - Tyres holding air - This lot is part of a genuine dispersal on behalf of a deceased estate and the farm is being sold. - Please note that much of the machinery equipment has not been used for many years and the farm has no capability of loading heavy or large lots.

Spares or Repairs - SN: 5895 - Lights present but untested - Air brakes are stuck on so believed to have a leak - C/w front lade - C/w strap tie downs - Wooden floor needs new boards & some metal cross members - Tyres hold air but tread is low - Trailer has a strong chassis

Thought to be 10 tonne capacity - Auto door (has some plating to anchor point) - Lights and hydraulic brakes present - untested - Tyres holding air - New seals in rams recently - Floor sound

Body Craft livestock box with a Merrick Login conversion trailer - S/N: 190310 - Box is 24' and trailer is 25' - Lights present and working - Brakes and handbrake working - C/W cattle partition gate - Tyres in good condition - Roof may need some attention - Has been used every few weeks, up until recently

12' x 6' - Lights and brakes not working - C/w front and rear lades - Weldmesh floor - Tyres are old but holding air

C/w sheep decks (no sheep partitions) - Tri-axle, tyres varying in tread - Chequer plate floor - Jockey wheel renewed recently - C/w cattle partition gate - Rear lights working - One soft tyre - Bung lids not present - Brakes need a service

Tyres holding air - Hydraulic brakes - Very good condition for age

Double axle - Demounted body - Working order - 3point linkage mounted crane - Tyres holding air - Approx 10t capacity - Very strong - Some rust spots on rams

Tri-axle - Model: DP12053 - C/w sheep decks & cattle partition gate - Brakes working but lights need attention - This lot is part of an unreserved genuine dispersal to dissolve a partnership.

On air, recent new air tanks & bags - 2 stage ramps - Lights need attention - Tyres holding air - Wooden floor - Side strap locker - Year 2008, not plated - Removable bolsters - In recent use - Can be delivered locally at extra cost

Type: TA510G - 3 rear light lenses missing, lights untested - No jockey wheel - 4 tyres holding air, some perishing - No decks or partition gates - Hand brake handle snapped - Chequer plate floor - Good tailgate springs

Wooden floor (solid) - Tyres holding air (perished) - C/w jack in trailer - C/w spare wheel and tyre - Single ram, tips fine - No lights - Removable sides

Chequer plate floor - Rear lights present and working - Mudguards - 1 previous repair to floor - Model: 7X49MDS - C/w internal division - Number plate light damaged

C/w with decks. - How lower and upper partition gate for sheep and partition door for cattle etc. - Is the higher one for horses. - Has just have brakes fully serviced and working spot on. - Had brand new wheel bearings all round. - All lights check and new 7pin plug fitted. - Has brand new brake away cable. - Good working jockey wheel. - Good wheels and tyres all round 2 brand new tyres fitted. - All vents present and straight. - Roof straight and clean. - Good ramp and loading gates. - Straight and working side doors. - Good honest trailer fully serviced ready to go

Approx 7' x 4' - Manual hydraulic pump - Wooden floor drop - C/w drop sides (one side is slightly bent) - Lights work

12 x 6 - C/w front & rear lades - Weld mesh floor - Tyres old but holding air

Carries 3t - Tyres holding air (some perishing) - Useable condition - Bed is 12' long - Telegraph poles not included

Tank is 6' long x 5' high approx - No tap - Ring hitch - Not roadworthy - Tyres holding air, but tyres not great - Can be pushed up ramp but not lifted

One tyre flat - Lights and brakes untested - Cage sides - Body is 14' long x 5'6'' wide - Aluminium floor and ramp - Rear jacks - Has been used to move sheep around

14' - Flatbed - Owned from new - Tyres good & holding air - C/w spare wheel, never been used - Brakes & lights in working order (needs one new front light) - Photographed with extension back & lade which ARE NOT INCLUDED in the sale - Original headboard will be fitted.

Brakes in working order - Lights need attention - Tyres holding air - C/w spare wheel - 5'10'' wide x 8'2'' long - Aluminium floor - Partition - Removable roof and sides

Removed from mitsubishi canter - Very good condition - Little use - 10' 6'' long x 6' 10'' wide - Drop sides & tailgate - Hydraulic ram present (some rust spots)

20' x 8' wide - Twin axle - One stub slightly bent - Hardwood floor - Brakes & lights untested - 3 flat tyres - Contents not included

Lights and brakes present but untested - Tyres perished but holding air - Handbrake working - Serial No. 24636 - Assistance with loading available if required.

1080mm long, 830mm wide

2055mm x 1120mm - Needs a new tyre

7' x 4' wide (internal) - Make unknown - Drop sides (one side slightly bent) - Tyres good (holding air) - Tipping works okay - Lights tested - Good condition

With Botex 360 Loader - 12' long - 10T carrying capacity - Lights present and working - Brakes working - Tyres in good condition - No leaks and all working - Being sold as no longer needed

2000mm x 1240mm

Spares or Repairs - No wheels - One mud guard missing - 9' long x 5' wide

Was made to fit 3 motocross bikes - Brakes & lights working - 2 new tyres - Repainted - 10' overall length & 6' overall width

C/w winch, 12v 7 remote control - C/w spare wheel, tyres holding air - Brakes & lights working - Good condition - Ramps included - Straps included - C/e jockey wheel

In good condition

C/w spare wheel and tyre (tyre very good) - No decks - C/w cattle partition - Purchased new in 2024, manufactured 2023 - C/w chequer plate mud guards - 14' tri-axle trailer - LED rear lights present and working - Open front ventilation - All tyres with reasonably good tread - Brakes working - Very tidy trailer

Solomon refrigerated container with Rivacold electric refrigerator unit - Serial Number - 21909

Could be used as wendy house/dog kennel or chicken coop - 6' highest point - 6' x 4' base footprint - Has been used as dog kennel - Barn stored - Loading available

Approx measurements - Used as site hut but no longer needed - Solid and water tight - Window shutters, electrics with one striplight and sockets which work a bit but not PAT tested - No key for the door but can be locked with a padlock (not provided) - Can load but no artic access - Will be empty before collection

Single use - can assist with loading

Unfinished project - No doors or windows - Douglas fir timbers - Dovetailed joints - Each side is 5m long - Footprint 64m2 (approx) - Very substantial project - Viewing recommended - Could be delivered/finished at extra cost

Beautiful handmade shepherds hut - Just finished and ready to use - 2.59m wide - 3m long - On new chassis with turntable

Shower with a gas hot tap boiler & a gas bottle just attach to a water pipe and use - Used once

Good condition - Tail gate

Quicke brackets - Tines all present - Some rust holes

Quicke brackets - Lots of rust holes

5'3'' wide - Sound floor - Chiltern brackets - Good condition

4' 7'' wide frame - Spikes 34'' long - Chiltern brackets

4'2'' wide - Chiltern brackets - Good condition - Used recently - All tines and cutters present

Chiltern brackets - 2008 - Some perishing on pipework - All tines present - Some cutters broken off - Still usable if cutters repaired

Good order - Straight tines - Pin and cone brackets (Matbro) - Very strong

Home made - Very strong - Matbro pin and cone brackets - Middle sleeve for extra spike - Working order

6' wide - Good condition - Had little use

Came off a 2000 hour machine - C/w locking pin & ram.

Quick hitch 45mm pins - Strickland 2' bucket never been used.

New and never fitted - 2021 year - No brackets (frame only) - C/w instruction manual - Euro 8 headstock

Very tidy - Tines all present - Has had another set of brackets welded on

Brackets unknown - As new - Very little use

No brackets welded on - 2 new pipes - Pin & bushes tight - Non removable sleeves - Can be loaded

Euro 8 brackets - Removable tubes for the bale spikes - One spike has slight bend, doesn't effect use

Good condition for age - Rams in good condition with no leaks - All working as it should be - Handy bit of kit - Loading available

Six months old - 7ft width - Euro 8 bracket - Done hardly any work - No faults at all - Selling as too big for tractor

Straight and strong dunk fork - Not seen a lot of work

Useful size bucket - See the crack and small holes in the picture

Approx 7' - JCB brackets - Needs some repairs as shown in picture - Loading available

Spares or repairs - C/w Euro 8 brackets - Spares or repairs as needs new hydraulic pipes - Missing one top tine and a bottom tine - Hole bracket for bottom tine is damaged

147cm wide - Rear door drops - Bought new on farm and done little work - C/w tipping catch - 3 point linkage

Removed from International B250 - All complete - C/w bucket & tipping ram

Tractor mounted - Cat 1 pin size - 1.1m width - 200l hopper - This has never been used but is very shop soiled

Euro bracket - 1.75m width - Brand new never used

Euro brackets - 1200mm lengths of forks - Very shop soiled

On euro brackets - 1.55m width - New unused

Suitable for MF135 or similar - Loader boom - Heavy duty bale spike - Concrete weight block - Mechanical loading can be arranged but vendor requires a few days notice to organise

Little work

Euro 8 brackets - Max 1500kg each arm - Tidy - Surplus to requirements

Euro 8 brackets - Very good edge, had little use

On euro brackets, BRU200 - 2.0m width - As new only used a handful of times

Cat 1

Two 2 foot spikes - Tines are loose

To fit a JCB telehandler - May need new brushes

3 point linkage mounted - C/w 2 props - Visible weap on main ram seal - Pipes present