In working order - Topper has holes in the top and has been patched in places but does not affect use - Loading available - C/w PTO shaft

Tractor mounted - Working order - Lights untested - Spool controlled - No swivel shute - Tyres in fair condition

Very heavy duty - Single spool lever operation - Good hydraulic pipes - High capacity splitter with exact pressure unknown but ram was removed from Bulldozer

Spares or repair - Serial No: XLCD288490 - C/w PTO shaft - Skid plates were replaced in Autumn 2024 - C/w grass conditioner - 8' cutting width - Loading available - Inside bed frame sheared

Very little use since new - All good metal with very little wear - Adjustor working as should - Original paint

9' including frame - Water filled - ''The lot is being sold as the vendor has ceased livestock farming.''

In wooden frame (7' wide in total with frame) - 16'' diameter - ''The lot is being sold as the vendor has ceased livestock farming.''

Spares or repairs - 5M - In need of some TLC - SN: 46676 - Loading available - Tines are rather worn - Hydraulic folding

Belt and cup planter - 2 row machine

Spares or repairs - Not been used for many years - Problem with one of the rollers - Large hopper - Rollers approx 12'' x 24''

Spares or repairs - Approx 1980's - Loading available - Has not been used in many years - On twin axle suspension trailer - All tyres hold air

47' sectional corn auger - 4inch single phase with motor and running gear - Comes with a wheeled tripod - Buyer to dismantle

Front and rear mowers - Serial No: 28900 - PTO shaft - Cutting width: 5ft 6'' - Ideal for small tractor - Loading available

3 phase - Working when last used 6-7 years ago - Belt present but not pictured - 4'' diameter.

19'' - 20'' thick - Can be loaded on to a trailer.

Mat sections 4'

Strong framework - Good web - Manual folding - This lot is part of a genuine dispersal sale due to bereavement. A viewing day where all lots will be available to view is scheduled for Thursday 14th August between 10am-4pm. All lots should be collected on the collection day scheduled to take place on Friday 22nd August between 9am-5pm.

C/w PTO shaft - Loading available - Working when last used approx 2 years ago - Dry stored

Spares or Repairs - Not been used for 20+ years

Spare or Repairs - Can be loaded - Conditioner removed in last field due to bearing going and slipping belts - Bed worn out - Gear boxes, frame, pto, shafts, conditioner and tines in good order.

Single phase - Working order

In good order not been used for a few years

Serial Number: 16030006 - C/w 540 rpm PTO shaft - Loading available - Topper is in good condition, has barely done any work, in good solid shape - Has just been serviced, blades sharpened with new hardware and gearbox oil changed - Ready to go! - Cat 1 linkage

Spares or repairs - No header - Can assist with loading

Spare or Repairs

Originally horse drawn but later converted to drawbar - Barn stored for many years - Rolls Freely - Comes with original seat

Spares or Repairs - Stored for many years - Some parts seized and rusted - Make good ornament or restoration project

Spares or Repairs - Original condition - Barn stored for many years - For spares or restoration, some wearing metal needing replacement.

Spares or Repairs - good original condition, appears complete - Has had a repair to rear mouldboard in the past.

Spares or Repairs - Good condition, appears complete - Rolls freely - One front wheel loose.

Good condition

Antique - In good condition considering not been used for 30+ years

Spares or Repairs - C/w PTO shaft - Selling due to being surplus to requirements - although not tested recently believed to have been working when last used - However, significant rust visible on drum cone - Otherwise appears tidy for age

Spares or Repairs - Unknown make - Manual lid - Tyres flat - Loading available but only by arrangement with few days notice given

Spares or Repairs - For a feature or parts

Spares or repairs - Used this year

5' grass topper - Working width: 5ft/1.5m - C/w PTO

C/w PTO - Working order - Barn stored - C/w rear gates - Springs in good order - All tines present - Tyres holding air

PTO shaft - Working width: 1.5m - Last time it was used it all worked perfectly - Loading onto a trailer available

Gear box all worked when it as last used - PTO - Loading available onto a trailer

Doesn’t look to have had too hard life - Fully working, nothing bent - Just had new belts - Ready to go to work. - Can only be used on the front of a tractor not the back

Serial number: 164544 - Working ok but could do with some new blades - Fair condition

Spares or Repairs - 500L tank capacity - 6m working with

Spares or repairs - Needs some blades, belts and sharpening stone - Tyres holding air with tread - C/w PTO shaft and control box

Drive roller sheared off but new roller purchased but not fitted along with coupler - Last used in 2024 - Dual side conveyor - Tyres holding air - Lights present but untested - No weigh head

C/w crumbler roller - Some corrosion but solid - Hydraulic folding

Serial No: 66498A - PTO shaft - Full service last year - Barn stored - Used last year without fault - Only selling as no longer required

Manual vari-width - Has had some previous repairs - Good serviceable plough - Only being sold as no longer needed

Manual vari-width - Has had some previous welds - Good serviceable plough - Will need some new wearing parts - Only being sold as no longer needed

C/w PTO shaft - Some paint flaking - This lot is part of a genuine dispersal sale with the vendor having sold the farm. All lots must be removed by Sunday 24th August at the very latest with no loading or collection available beyond this day.

Good solid roller - All rings present and solid

Good solid set ready to go straight to work. Have had some repairs in the past but solid and strong

C/w PTO - Working order - Offsetable - Some surface rust (no holes) - Barn stored - No assistance with loading

Very good web - Believed unused - Some flaked paint - Barn stored

Used for liquid slurry - Auger removed - Rotor run - Door works - C/w greedy boards

Spares or Repairs - 5.5 meters working width - Loading available - Losses drive when in a heavy crop

Hydraulic folding - 4 depth wheels - Strong framework - C/w some spare tips - 14' working width - All tines present & complete - Good example for age - C/w trailing harrow

C/w 2 buckets (2' & 8'') - All rams etc working - 3 pnt linkage - Hydraulic pump working

All tyres holding air - Good framework - Appears complete - Can be loaded for purchaser

Telescopic mast - Requires new rope before use - Weight believed to be 750kg - Forward/backwards tilt on hydraulic top link - Hydraulic side tilt - Spool block controls -

Works well - Runs freely but seldom used - Oxide paint patches - Rust at hitch point - Loading available

C/w PTO - Loading available - Some rust on ram but does not leak and has been used this year - Good condition and straight for age - Runs up well

C/w PTO - Loading available - Some rust on top but working condition - 6' working width - Ideal for paddocks & makes a good finish with rollers

10 meter working width - SN: 822642 - Loading available - Very tidy for age - In working order

Mole boards & other metal need replacing - 3 disc one not fitted

'A' frame hook up - Some corrosion in places

Requires a new PTO guard before use - 2 paddles - 3 pnt linkage

Spares or Repairs - Tyres holding air - 6.5hp engine - Corrosion on front - C/w drawbar

Good working order - Used last year - Help with loading available

Good working order - Used last season - Bale counter does not work - Help with loading available

3m working width - Good working order - Help with loading available

Working when last used - Spins & tips - Wrap tensioner is perished - Help with loading available

Working when last used but requires attention - Tyres holding air - Spare plough part available at Lot 4583 - Help with loading available

C/w disc or shoes - Used all last winter & spring but requires a few minor repairs - Macerator works well - Loading available

Good working order

Working order - Used last winter - Electrics untested

Spares and repairs - Land Rover mounted snow plough - 12v hydraulic lift pump present - Ram missing -

Spares and repairs - Donor baler - Good belts, tin work - Bits missing - No control box but black box on baler present

Good working order - Cleans paddocks well - Kawasaki engine just been serviced - All tyres holding air - Solid metal bin with no holes and tips fine - Height adjustment on front all working fine - Tows well - Can be towed on quad bike or UTV (anything with a ball hitch) - Quad pictures is also for sale seperately

Serial number: 140410 - Loading available - C/w PTO shaft - 3m working width - No known faults - Good working order, used to make hay this season. Very quiet and smooth running - All tines present, PTO and gates included

12' working width - Manual folding - Good tips and chain - Some rust on frame - Loading available

Spares or repairs - PTO present - Not used for a number of years

Hydraulic folding, one behind the other - Last used in the spring 2025 - One weeping ram

Working order - Serial NO: 15310800274 - PTO could do with freeing up - Rust here and there

Spares or repairs - Hydraulic shut off - Wagtail - No control box - Needs hydraulic pipe - C/w adjusting tools for settings and comes with shaft.

Good working order when last used 2 years ago - Barn stored. Rust corrosion on tin work. Tyres good - holding air - PTO present. 5ft 6inch pick up reel.

Auto bale sledge - All working order. Tyres holding air. Surface rust only.

Good tines - used this season. Straight & tidy - good tyres holding air. Slight surface rust. Bucket of spare tines & springs.

Fertliliser spreader All turns freely, hasnt been used for past couple of years.

Sold as spares or repair - 4ft working width. Loading available.

1.2M working width 3 point linkage, minimal use from new, still has paint on tines Loading available

3 section harrows - C/w bar but needs new chains to attach each section

11' x 5' bed - Replaced rear canopy used for straw bedding only for last 5 years - Bed will have some holes - Bale not included

Tractor mounted - Last used 2024 - Needs chain replacement