Roller rear door easy to open - A little heavy to close but will close - Front to tyre not holding air - It will be repaired or replaced to tow away - 11' long x 7' tall x 67'' wide - This lot is part of a genuine ongoing dispersal. The vendor is selling the property and downsizing.

Clean lightweight box to tow - Divider and cross bar - for 2 horses - Lights and brakes have not been tested - Wheels all good - Been used and ready for more

Euro brackets on adapter plate - Useable condition

One auger working when last used - Auger flights slightly bent - Some surface rust - Manitou brackets

Only used once - Open grab is approx 2m - C/w rotator - C/w mounting brackets

Floor condition unknown but holding stone - Removable rear - 1m wide

Good order - 1.2m long - Removed from Merlo P25.6

Merlo brackets - Solid throughout, had little use from new - Tidy bucket, good edge - 1m 3 cubed - 372kg

Loader extension - On Euro brackets - Some surface rust but good condition

Tines present

30'' width

Three point linkage

Not sure what tractor they fit on, not been used for 20+ years

Believed to fit 4 cylinder 1000 & 100 series tractors - All in used original condition

55kg each - Came off a Massey 6615

parts moving freely, some rust holes in back corner, otherwise solid

C/w bucket and spike bucket - Surplus to requirements - Hydraulic pipe could do with replacing although it still works

Forklift skip suitable for loading of loose materials - Good condition

All appear complete and correct

43'' needs a bit of welding (see photo) - Fork okay

Heavy duty - Solid - No holes - Cat 1 linkage - C/w tailboard - Dry stored - Very well built

Unused - Adjustable opening width

C/w dung fork & grab - No rust on rams - C/w brackets for International 475

3 point linkage mounted - Top tine measures approx 67cm - Bottom tine measures approx 84cm - Solid frame

Little use - 45MM pins - 233 pin centres - 152MM dipper gap width - To fit TB250 or similar

Fairly good wearing edge - Solid - 2.25m wide - Euro 8 brackets

Sambran brackets - Solid - Had odd repair

Euro 8 brackets - Evans and Reid - Missing spike will be replaced for purchaser

C/w joystick controls, cables and pipes - 3rd service - Euro 8 headstock - Weld on bracket not included - C/w stand - Previously used on Same Silver 100 - Sale due to loader tractor being sold

JLG brackets - Twin rams - Few bent/loose tines

C/w side knives - Euro 8 brackets - Twin ram - Pipes present (some perishing) - 1 bent horizontal tine - Bucket still solid with good edge - Would clean up well

1.1m pallet forks - Euro 8 brackets - Had little use

C/w brackets - Removed from Ford 4600 - May need some pipes etc

No holes - Solid and heavy duty

Euro 8 brackets - Pipes all present - All tines correct - Very tidy order

80mm + 65mm pins (interchangeable) - Heavy duty

Approx 80mm pins - Big Strong bucket

Galvanised skids - Still in use - This lot is part of a genuine dispersal sale with the vendor having sold the farm. All lots must be removed by Sunday 24th August at the very latest with no loading or collection available beyond this day.

For slurry tanker - MZ Swivel - Single acting gate valve - Made last year and done very little work

MX Euro 8 brackets - Twin rams - Good pipes - Year unknown - This lot is part of a genuine dispersal sale with the vendor having sold the farm. All lots must be removed by Sunday 24th August at the very latest with no loading or collection available beyond this day.

Euro 8 - Alo - Adjustable - Tines 0.95M Long - This lot is part of a genuine dispersal sale with the vendor having sold the farm. All lots must be removed by Sunday 24th August at the very latest with no loading or collection available beyond this day.

Euro 8 brackets - Bent, worn and old but may do a job - This lot is part of a genuine dispersal sale with the vendor having sold the farm. All lots must be removed by Sunday 24th August at the very latest with no loading or collection available beyond this day.

Missing 3 tines - Euro brackets - Twin ram - Pipes present (some perishing) - Working - This lot is part of a genuine dispersal sale with the vendor having sold the farm. All lots must be removed by Sunday 24th August at the very latest with no loading or collection available beyond this day.

In good working order one side has been worn other side is like new

3 point linkage - Has some damage on one end but still good solid spike ready to go to work

7' 2'' wide - Chilton bracket - Good solid bucket but holes in base - Has a good blade

Chilton brackets - 5' wide - Good condition - Crack on main frame has been welded and repaired as pictured.

Not sure of year - Can hold up to 2000m and 4'' lay flat pipe on it - The reeler cam carry & reel 4/5 & 6'' pipes - The reeler is on an A frame but easily converted the 3 point linkage - A frame not included - Sold as seen

Pin & Cone bracket type - Good strong bucket - Solid with good wearing edge

JCB Q-fit bracket - Hardly ever used - Ready well made

JCB Q-fit to Pin & cone - Strong & well manufactured

Hydraulic pipes present but one perished - Chilton brackets - Solid framework

Unused - 35mm diameter pins - 125-150mm pin centre range - 110mm pin width - Will fit Kubota U27-4 & other 2-3.5 tonne excavators

2019 Manufactured - Manitou brackets - No holes in floor - Some blade left

Manitou brackets - Tri ram - Some rust on rams - 1 tine missing

Very heavy duty - Needs some hydraulic pipes - For large square bales

Working order - Used this season - C/w pin & cone brackets and extra large tines for large square bales

Help with loading available

Spares or Repairs

3 point linkage - Some surface rust where its been sat on the floor but nothing substantial - New hydraulic pipe work - Ram in good order

A frame attachment and 3 point linkage - Frame solid and good spike

3 point linkage - Good solid frame

1100cm length of forks - 1100cm width apart (outside to outside of forks) - Good strong frame - Well made - On 3 point linkage

1250KG - Loading available - Couple of scratches - No known faults

MX brackets but can be used on pallet forks - As new - 1/2 ton - Loading available

22.5 CU FT - General purpose bucket - Manufactured 08/2023 - Euro hooks

6' 1'' overall width - Recent new wing runners and front rubber - A frame or 3 point linkage

Spares or repairs - Not used for a number of years - 1.7M width

C/w detachable frame

On A Frame - Approximately 1.2 ton - Concrete block is 94cm wide x 67cm deep x 80cm high.

Assorted pallet of John Deere tractor weights - Selling as unused as seen in photos.

Euro 8 brackets.

Good steel work - needs new floor. Opening back - c/w mesh door. 6ft wide x 3ft 10inch long. Has a repair on box iron frame.

Euro 8 brackets. Good working order - used regulary. One new pipe - no leaks on ram. Spikes under tubes.

Euro 8 brackets. Working order - slight rust on ram. Surface rust - Tines all good.

Merlo pallet forks

Trima brackets Not been used for many years. Sold as seen, not recently used.

Bale spike with Chilton mx brackets

Bracket to fit any attachment

1 Tonne lift - Cat 2 Sold as spares or repairs, no use over the past 4 years

3 point linkage

Brand New 3 point linkage

Link box 4ft x 4ft Box can be removed and used as 3 point linkage pallet forks

4ft wide, Massey Ferguson brackets Bottom pin size 35mm, top pin size 25mm. 94cm between centres

Came off International 454 (can come with brackets if wanted) - C/w Dung fork - Odd rust spot on ram - C/w stand - Hydraulic pipes perished

SN: C7NN1A002

New -

Attachment clevis - New

NC SUPER 3000 SLURRY STRIRRER SLURRY PUMP FOR TRACTOR - NC Super - Has a weld repair as pictured

Good condition

Hydraulics side shift - 1m long forks - Ideal for 3pnt linkage conversion

8' 6'' wide - Euro brackets - Very good condition - Used for grain only

New holland/manitou

Pin & cone bracket

Pin & cone bracket

Approx 40kg each - C/w pins & bolts