Not used recently but was working when last operated - C/w cover - Dry stored - Lights present and untested - Only minor surface rust visible - Hydraulic shut off - Headland adjustment

Owned from new - Very little use - Upgraded pulleys for faster unloading - A frame mounted - Steel and ply board extension with hinged lid

1 owner from new (farmer) - Low disturbance sub soiler - Hydraulic stone protection on legs - Hydraulic depth control - Hydraulic discs - SN: 201167 - C/w 11 spare feet - 6 front discs - 6 legs (tungsten tips) - LED rear lights - Rear 'V' profile trailing ring rollers - Genuine sale due to reduction in arable

C/w bungs - Model: STR 10-30-10 - Had very little use from new - Good paint -Loading available but appointment must be booked as friend loading with Telehandler - This lot is part of a genuine dispersal sale due to bereavement. A viewing day where all lots will be available to view is scheduled for Thursday 14th August between 10am-4pm. All lots should be collected on the collection day scheduled to take place on Friday 22nd August between 9am-5pm.

SN: VN2480101993 - 1500kg capacity - Hydraulic shut off - Disc - C/w 18 & 24m discs

This was a restoration project - Had lots spent on it with 90% of the bearings replaced, new blades, pick up tines, and a re-spray - All electrics work. - C/w PTO shaft - C/w Control box

Same owner since 2017 - 4 string 80W x 70H bales - No control box needed, all manual - Electric fan to keep knotters clean and working camera - Steering axle (hydraulic lock off) - Hydraulic bale eject & pick-up reel - 4 good tyres (fitted recently) - Hydraulic brakes - C/w PTO shaft - Being sold due to upgrade - Used recently this season - Any inspection or viewing welcome

3 meters working width - Loading available - In good working order

Serial No: 110387 - 2 x hoses 4 & 6 inch - PTO shaft - Lights and brakes working - This machine was purchased to clear water at old property. Has not done much work at at all due to moving to new premises - No longer needed. In nearly new condition

Model PD4, year not known - 3 point linkage - Not used since moved to new property. No longer needed, had done light work - Loading available

Worked well when last used - Always lived inside

Bought from Simtech 2 years ago - Selling due to reduction in acreage - Will drill into any conditions, wet or dry - Has a new set of feet and comes with spares, plus a set of spare sponge wheels for the metering system - Good for mixtures of seeds (SFI etc) - Simple drill that can work on a lower horsepower tractor

2.80M working width - C/w new PTO - Loading available - Roller missing - Working last year, new belts couple years ago

Shelbourne Reynolds Powerspread Dairy 2000 - Timber side extensions - Front and rear slurry canopy - Lights and brakes worked when last used - Tyres holding air, good treads - Hydraulic side door - New paddles recently fitted to rotor very little work since - Selling due to change in contracts

2014 - 3m working width - Has not been used for approx 4-5 years due to change in farming system - Working fine when last used - No cracks or welds

1.75 working width - C/w PTO shaft - Loading available - As good as new

1.45 working width - C/w PTO shaft - Loading available - As good as new

Serial Number: 07MA36041 - Disc coulters - Hydraulic front furrow - H beam bushes showing signs of wear but not bad, puncture in land wheel which will be repaired before removal - Good straight plough which will go straight to work, headstock good & tight, new wearing metal less than 30ac ago, mole boards all good & plenty of life + 1x new on front furrow, quantity of of new & part worn spare metal + bolts to be included in the sale

Tyres holding air - Bearings renewed 16-17 months ago at a cost of £1600.00 - Last used in 2024 and put away in working order - C/w bale shute extension - Some corrosion on strip near string box as pictured, slight dent on rear shute side panel - Owned for numerous years - SN: CC342AX047604 - Owner browns accumulator lotted separately - Dry stored & now no longer needed - C/w PTO shaft (may need new guards) - Inspection, Enquiries welcome

Fully galvanised - Fully independent chassis, sprung drawbar, forced rear steer axle, H/D high speed BPW axles, 750/60R30.5 tyres, air brakes proportional to the load, 8' self fill with funnel & hose, turbo filler on the self fill arm, hydraulic internal agitator, hydraulic sliding top fill hatch, ecopump air induction, Jurop PNE155 15,500 litre pump, 6' side fill valve, 6' & 8' suction hoses, rear linkage, electro valve controls & 6m SoloDisc shallow injector. - Tanker & injector all in good condition. Flow meter fitted but needs attention. - Viewing by appointment Monday to Friday, 8am to 5pm Marston Magna.

Swivel chute, Bluetooth controls, 2 speed gearbox - Viewing by appointment Monday to Friday, 8am to 5pm Marston Magna.

With spinning disc spreading, sand, sawdust, shavings, paper pulp etc. into cubicles - 1.5 wide, 0.9m³ capacity - Viewing by appointment Monday to Friday, 8am to 5pm Beaminster.

Suitable for 2 x Quadrant or 1 x Hesston bale - Swivel chute - C/w Bluetooth controls, braked axle, mudguards, external controls, 385/55R22.5 tyres, road lights - Viewing by appointment Monday to Friday, 8am to 5pm Beaminster.

4.3m hydraulic folding - Fully galvanised - 6 rotors, 24 blades, rear rollers, new blade bolts & some spare blades included - Viewing by appointment Monday to Friday, 8am to 5pm Beaminster.

REMOVED DUE TO UNFORSEEN CIRCUMSTANCES Hydraulic side shift - Hammer flails, rear roller, PTO with integrated free wheel clutch - Viewing by appointment Monday to Friday, 8am to 5pm Beaminster.

6.28m cut width - 250hp gearbox - 1'- 8.25' cut height - 6 blades/rotor - Road lights - HD wide wheels - very little use - Only being sold due to change in policy. - Viewing by appointment Monday to Friday, 8am to 5pm Beaminster.

Joskin Modulo2 MEB12000 vacuum tanker - Approx..2700 gallons - Fully galvanised - Twin axle rear steering - Sprung drawbar - 8' self fill with funnel & hose - Hydraulic internal agitator - H/D axles - 600/55R26.5 tyres - Hydraulic & proportional to the load air brakes - Work lights - Swivel eyelet - Jurop 106 pump with over-pressure valve - Ecopump air induction - W/a pto - Communication gauge - Rear hydraulic bell valve - 6' side fill valve - Fitted 7.5m Pendislide trailing shoe - Macerator & electro valve control - Everything works as it should but would benefit from some general cosmetic tidying - Viewing by appointment Monday to Friday, 8am to 5pm Beaminster.

Totally immaculate, almost as new condition - Dirty water use & irrigation use only - Jurop pump - 540 pto - Rigid drawbar - 550/60R22.5 BKT tyres - Road lights - Hydraulic brakes - L & R blanked fill ports - Rear 6' fill valve, rear 6' hydraulic valve with splash plate,4m 6' pit hose - Viewing by appointment Monday to Friday, 8am to 5pm Marston Magna.

6m³ capacity- - Swivel chute - Electric joystick controls - Clean, straight & tidy - Viewing by appointment Monday to Friday, 8am to 5pm Bere Regis.

Hydraulic width adjustment from 7.7m to 8.6m - Hydraulic folding - 3D axles - Integrated free wheel - Rear steer - Lights and markers.

894Hrs - Owned from new - Hatch engine - Front and side brush - New motors 18 months ago - Galvanised - Slight rust patches - Rip on seat - Cover over hopper - Tyres solid - Starts and drives

String only - C/w control box - New bearings fitted recently C/w PTO - 3' to 6' bale - Last used in 2024 and now being sold as no longer baling and surplus - New belts fitted approx 3 years ago - Enquires welcome

Year unknown - Some rust/small holes on bin/hopper - Capable of 20T an hour - Used right up to date and being sold due to upgrade being purchased - Hardened rollers - C/w PTO shaft - Tyres holding air - Hydraulic pressure - Lights need attention - Some wear in places, can be seen working and inspection welcome

Can handle up to 10' diameter timber - This machine was completely refurbished all through approximately 4 years ago including fitting 4 new blades, only been lightly used since - I n good working order - Viewings recommended can be seen working if want to - Selling due to change in circumstances.

Used this year - Good working order - Serviced and ready to work - Only being sold as bought a wrapper with a loading arm - Done approx 35,000 bales - C/w control box with remote control

12m working width - 1,200L tank capacity - Loading available - In good working order - NSTS tested 8th May 2018, report number 228307

1 new recent arm support fitted prior to sale - C/w PTO shaft - 7.3M working width - Hydraulic folding - Lights present and working - Working order - 4 tyres per rotor, all appear in good order - Rear hazard fenders - Independent rotor height adjustment - C/w 2 spare arms and full pack of tines (6 tines) - Part of a genuine phased dispersal sale with all enquires and inspection welcome

1 owner from new - 4 star, 6 tines per rotor - Tyres holding air - C/w PTO shaft and 2 spare tines - All tines present and correct - Working order - Genuine turner being sold as part of a phased retirement sale, enquires and viewing welcome

1 owner from new - Hydraulic vari width - Slatted mole boards - Hydraulic turnover - Very good wearing metal fitted only a handful of acres done since - No welds - Lots of new parts - Good tyre holding air with tread - Believed to be a DL90 plough but no plate to confirm

C/w PTO - 3 point linkage - Cable controls - SN: 7451904-043 - Loading available - Rear plastic plate/guard cracked - Good working order - Good condition for age

Bales count unknown - Owned on farm for last 20 years - Never bailed more than 800 bales a year - Working when used last year - C/w full set of knives - Net wrap - C/w PTO - C/w contra bar - Tyres have good tread and holding air (1 has a slow puncture) - Odd small bend to bodywork - Barn stored - 2.1M pick up - No longer required as land has been let

6'' - C/w PTO - Bought new on farm - Hydraulic intake & out take - Emergency stop - Bought from mason kings & done little work - ''This lot is only being sold as the vendor is giving up contracting.''

Front kidd 8' roller - Rear twose 8' roller - Front kidd roller has been professional converted to be a lead roller - Both water filled - All bung complete - All on wooden bearing blocks - For sale due to upgrade to hydraulic folding

Each roller is 8' wide - Believed water filled - All bungs present - Wooden bearing blocks - For sale due to upgrading to hydraulic folding

REMOVED DUE TO UNFORESEEN CIRCUMSTANCES

For collecting Equine waste - SN: 230972 - Loncin 196cc engine - Starts, runs & works - Very tidy all round - Easy ratchet system - Purchased new a few years ago & done very little from new

Good working order - Honda engine that is in good running order as shown in video - Tows well - On flotation tyres so less ground pressure - Tyres have some perishing - Good solid frame with no rust - Good solid hopper has had some repairs - Overall a good machine for fertiliser or grass seeds

24m - Isobus, c/w joystick, section control, boom circulation, tracking drawbar, power beyond hydraulics, auto boom levelling, steep ground kit fitted on booms - 480 tyres - Very straight and tidy machine for its age on low acres having previously been on a small arable farm from new, spraying cereals only - Recently serviced by main dealer - Selection of replacement seals and parts included

3 point linkage - Electric controls - Serial number: 02N1183 - Working order - C/w PTO shaft

C/W slug fan jet spreader, LED lights & twin tine kit (£4,500) & bean coulter kit. - Approx 250ha of use.

C/W straw rake. - New HD cutting discs replaced 15 months ago.

Good working order - Video of tedder working available

Good solid topper in good working order - Tows and cuts well - Will cut anything from grass to gorse - Has electric start and pull start - Has height settings front and rear to set the cut height - Tyre holding air and in good order - Upgraded fuel tank to a metal one

C/w PTO shaft - Lights and brakes untested - Good condition - Shot blasted and repainted a couple of years ago - Loading available

Good working order - Flotation tyres 650/65 - 30.5 good tread - Used last year - Owner has had since new

Top fill - C/w PTO - C/w slurry pipe - 800/65 R32 tyres both have good tread but has a slow puncture (takes a week to go down) - Please note pump works but is slow in sucking - Not been used for approx 2 years

One pass cultivator - 3m working width - Vendor bought new - Used this year - 526/50-17 tyres (pictured with spare tyre will be fitted before sale) - Good metalwork - Odd ram has slight oil leak

2015 KEENAN MECH FIBER 360 MIXER FEEDER WAGON - Working order - Good knives - Not done much work since barrel relined - Rear steer axle - Good brakes - C/w pace connect weigh system and control box - C/w PTO box - Used all winter - Auto lube

Feed out kit (both sided) - Flotation tyres (620/40 22.5) all with good tread - Brakes and lights work - Wide angled PTO (no guard) - Used recently, good working order

Serial No: JB29088 - Rear fill pipe - Brakes and lights working - Has PTO shaft and control box - Jurop pump - Steering axle - Spoon hitch - Air brakes - All working as should

2800 gallon capacity - Has all connections required for use with a trailing shoe or dribble bar - C/w PTO shaft - Lights working - C/w control box - Brakes working - Selling due to upgrading to a new slurry system. Has performed well throughout the last few years, maintained well on farm. Worth looking at as it had the capability for a trailing shoe or dribble bar, comes with splash plate.

Barn stored - used last season. Excellent condition. Good tyres - holding air - slight perishing. Some surface rust. Complete with sledge hitch. Sledge for sale seperately

SN: T464242 - 3M - Loading available - Harrow for front tractor - Can be rear mounted also - Only used for one season

C/w PTO - All tines present straight & strong - Skirt does have odd rip - Working when last used, last year - Barn stored

C/w operators manual/part book - Model: Opico GT 380 - Used recently and working - C/w 2 full gas bottles yellow frame to hold them - C/w PTO shaft - Capacity believed to be 8-9 tonne - Some new parts recently - Green hopper/bin not included - Top can be removed and can be loaded onto lorry or similar - Can be viewed working as it stands as it is set up

Serial No: B59000 02215X - Has PTO shaft - Used this year - Will need a service for regular use

Max.diameter wood 250MM

SN: CC0580X327851 - 25,976 bale count - C/w control box - C/w PTO shaft

9' cut - Adjustable height on wheels - C/w PTO shaft - Working order - Solid bed and damage shown will be professionally repaired prior to collection

3 pnt linkage mounted

C/w PTO shaft - C/w control box - Swivel shute - Hydraulic tailgate - 3 pnt linkage mounted - Working

Spare or Repairs - 1.5m cut - Linkage frame will be repaired professionally before collection - C/w PTO shaft

2013 KVERNELAND R0-C VN 205 FERTILISER SPREADER - C/w PTO shaft - C/w cover - Working order

Hydraulics pipes present - C/w land wheel & tyre (with tread) - Metal quality/condition varies

Very good wearing metal - High horse power headstock - Heavy duty depth wheel - Hydraulic front furrow - No welding or cracks - Loading available

SN: 0003149012-2012 - 3.2m cutting width - C/w PTO shaft - Loading available - Slight cosmetic wear - Strengthened conditioner hood/pulley guard - Bed rebuilt last season & a new conditioner bearing replaced this season - Spare blades, blade pins & clips, spare conditioner tines included in the sale - Sale due to change in farming practice

Weigh cells working - Used last winter - New chains recently - Knives - C/w PTO shaft - Lights present

Twine only - Wide pick up

Used this year - Good working order - Only selling as too big for farm and bought a smaller rake

Used this season - Hydraulic folding - C/w with PTO shaft - RH lights need attention - Transport tyres with tread and holding air - Some tines need renewing - Hazard markers to rear

3m working width - Metal Conditioner tines - Quick change blades - Skirt tidy - C/w PTO - Most blades need turning

Rear discs - Selling due to upgrade

Teagle Tomahawk 404 Bale Shredder/Straw Chopper - C/w PTO shaft - Working order

Serial No: 060269 - 2357 bale count - C/w control box - 750mm wrap size - Was purchased in 2013 - Hydraulic driven, operates on a four-lever cable control - C/w lift arm and wrapping table - Cut, hold & bale tip in good working condition - Good tyres all round - Has not been used in a few years and is barn stored - Specification: Bale wrap computer monitor counts bale rotation, lever locks in position after 2 rotations and stops at the pre-set number of layers, stores working bale totals and rotation speed, 4 lever control - Has 4 film roll holders, film cut and hold system - 'ground supported damper' to gently lower bale to the ground and self loading arm

1.6M working width - Bought new and only used to cut garden which is 1.2 acres - Good working order - C/w manual - This lot is part of a genuine ongoing dispersal. The vendor is selling the property and downsizing.

Tidy - Not done a lot of work

9' wide - New blades and slip clutch just fitted - Working order

Manual variwidth - C/w landwheel - Some tips/mouldboards may need replacing - Missing skimmers - No cracks, bends or welds to main beam

Manual turnover - Some good wearing metal left - No cracks, welds or bends to beam

C/w PTO - C/w control box - Only has half a set of knives - No pick up hitch - Tyres holding air but perished - Working when put in shed 4 years ago - Barn stored

Believed in working order - Was originally a stationary baler and converted by Massey Harris to be a tractor drawn - Tyres have good tread, holding air but perished - Paintwork tidy - Barn stored

New heavy duty PTO shaft - Working order - Adjustable skids - Odd small hole to frame

Done very little since new - C/w PTO shaft - Dry stored - C/w manual

C/w PTO shaft - Some paint flaking - C/w spare belts & manual etc - Dry stored when not in use

Sand filled lead roller - New wooden bearing on one side - Few welds but useable condition - Rear linkage

Reversible, galvanised frame - Good rubber - Slight corrosion - No welds - 3 point linkage or A frame mounted

3 legs & 3 discs - C/w PTO - Adjustable height roller - Good wearing metal - Paint work tidy - Manual

Recently had a new PTO shaft - 3 point linkage mounted, hydraulic lift - Galvanised 17' long from ram to propeller - Slight corrosion & weld in places - Good hydraulic pipes - Rust spots on ram

Tractor mounted - Had little use

3 point linkage - Serial No: TW1 - Loading available - New pipe to lift ram 2 years ago