Used condition

Euro 8 brackets - 1 tine missing - Near new Hydraulic pipes - Blades in good condition - No rust on rams - Good blade - Tidy for age

Euro 8 brackets - All tines present straight & strong - Hydraulic pipes in good condition - No rust on rams

1 tine slightly bent - Little use

Concrete blocks

MX Brackets - 19.5 CU FT capacity - Good leading edge - Good bucket

3 point linkage mounted - Hydraulic pipes perished - Tines straight and strong - Not used for several years

Marked 104 - 3 point linkage - 2 spikes - Solid frame - No loading available - These lots are part of a genuine dispersal due to retirement. Viewing and enquires are welcome by the owners.

Marked 110 - Believed to be Ford - These lots are part of a genuine dispersal due to retirement. Viewing and enquires are welcome by the owners.

Marked 111 - Sides 34'' high - 3 point linkage - Metal straight and tidy - Small livestock door - Folding rear barrier to allow open access - Timber floor, one board broken on corner - These lots are part of a genuine dispersal due to retirement. Viewing and enquires are welcome by the owners.

Never used - Manual pins

C/w hitch - Hydraulic PTO driven pump - Was used for loading my old crusher but have a bigger one now

New Holland

Believed to be International but may fit other models - Good condition

Spiral log/stump spiller - 45mm pins - Good hydraulic pipes - Not had huge amount of use

Twin ram - Good tines, hoses - Manitou bracket

280mm & 590mm digging buckets with teeth - 990mm grading bucket - all come with 35mm pins - Never been used

Good working order - Came off a 188 - C/w all bolts and brackets and stand, bucket and muck fork

Spares or repairs - Never been tried or tested - As found condition

Needs attention to hydraulic valve/rams as it does not push out square

In good used condition - Galvanised frame - 2 directional rubber blade in good condition

48'' working width - Spike tines - 3 point linkage grass aerator - Loading available

Bracket type, MX, Chilton, Massey - Done very little work - In good condition - C/w sidebar - Attachable either side

Set of ten 50kg new style John Deere wafer weights - Mounted on weight block and front linkage frame - Total weight 625kg

126cm width - JCB brackets - Few new tines - Loading available

NC engine, age unknown - Bracket type unknown - Bent curb brush but new spare one with it - Good solid heavy bucket - Bristles on main brush ok

Weight block for compact tractor - 3pnt linkage fittings - Exact weight unknown, thought to be 80-100KG - Can be loaded with notice given

Spares or repairs due to missing tines - Manitou brackets - Working (opens and closes as it should) - Twin rams - Hydraulic pipes present

Never been used - Solid

Good working order - Had welding on Blade 

JCB Q-fit brackets - Some metal has holes and needs attention

JCB Brackets - Oil pipes may need attention - Working order

4 Point linkage for dribble bar/ trailing shoes - Heavy duty - Pipe work as present

Good solid condition

Corrosion in the floor, only in the tin work and little on the bottom of the side panels

Bolt-on brackets - No pipes - Tines mostly ok

C/w JCB brackets - No holes, perfectly useable

Spares or Repairs - Some broken tines and damaged blade - 3 rams - C/w JCB bracket - Approx 6' wide - Opens and shuts as it should

Spares or Repairs - Good tines and blade but damaged centre blade - 3 rams - C/w JCB bracket - Approx 7' wide - Some hydraulic hoses fitted recently- Opens and closes

C/w hydraulic pipes (some rust & perishing) - Digger mounted - For sale as no longer needed

Hip grip cattle hoist - Good condition - Little use and dry stored

Heavy duty toe cattle clippers - In good order - Dry stored

In good working order

Hampshire 2000 Wet Mix feeding system for Pigs - Tank: 3000L Fibre Glass - Pump: 5.5hp Single Phase - Mixer: 1.5hp Single Phase (all sorts of applications)

10' x 4' 9'' - Sheeted bottom (sound) - All bars straight - Solid & strong (heavy duty) - Top bars are 2'' x 2'' box

C/w hangers & latch - Fully galvanised - Very strong & heavy

C/w hangers & latch - Fully galvanised - Very strong & heavy

Collection must be made within 14 days after the sale

Approx 8' 11'' - Sheeted both sides - Collection must be made within 14 days after the sale

Approx 12' 11'' - Collection must be made within 14 days after the sale

Barrier & trough - Approx 3 years old - Wooden dung board trough (solid condition) - All metal work straight

Marked 1 - C/w Extensions - Some defects but useable & solid - C/w 4 Pins

Marked 2 - C/w Extensions - Some defects but useable & solid - C/w 4 Pins

Marked 3 - C/w Extensions (base plate worn out) & some bars damaged/missing - Some defects but useable, extensions could be removed - C/w 4 pins

Marked 4 - 4 Ewe Adopter Unit - C/w 8 Bucket holders - Galvanised - C/w Stock board entry slots - No rust - In it's working clothes, can be set up in straight line

Marked 5 - Had little use - C/w 2 pins - Appears straight & correct

Marked 6 - Had little use - C/w 2 pins - Appears straight & correct

Marked 7 - Some minor defects but useable - C/w 2 pins - All metal present & strong

Marked 8 - Both have defects - Useable but not tidy & may need TLC

Marked 9 - Hook-over - Old but useable - Varying condition

Marked 10 - Hook-over - Old but useable - Varying condition

Marked 11 - 3 x barrel type - 1 x long type

Marked 12 - 1 x galvanised - All solid - Spike in field & insert mineral block

Marked 13 - 1 x damaged - 3 all solid - Spike in field & insert mineral block

Marked 14 - Crash barrier base - C/w Stock board ends - Solid steel barriers

Marked 15 - Crash barrier base - No end boards - Solid steel barriers

Marked 16 - Crash barrier base - No end boards - Solid steel barriers

Marked 17 - Crash barrier base - No end boards - Solid steel barriers

Marked 18 - Crash barrier base - No end boards - Solid steel barriers

Marked 19 - Crash barrier base - No end boards - Solid steel barriers

Marked 20 - Crash barrier base - No end boards - Solid steel barriers

Marked 21 - Crash barrier base - No end boards - 1 bar is bent

Marked 22 - All useable - Odd spot weld came apart and needs replacing or cable tie added - Mostly galvanised some minor rust in places

Marked 23 - All useable - Odd spot weld came apart and needs replacing or cable tie added - Mostly galvanised some minor rust in places

Marked 24 - All useable - Odd spot weld came apart and needs replacing or cable tie added - Mostly galvanised some minor rust in places

Marked 25 - All useable - Odd spot weld came apart and needs replacing or cable tie added - Mostly galvanised some minor rust in places

Marked 26 - No holes in troughs - Straight & correct except for minor defects - Some surface rust

Marked 27 - No holes in troughs - Straight & correct except for minor defects - Some surface rust

Marked 28 - All with faults - Surface rust but troughs solid

Marked 29 - All with faults - 3 with holes at ends of troughs, others with surface rust

Marked 30 - Solid troughs - Surface rust in 1 or 2 of them - Mostly straight & correct

Marked 31 - 4 x 9' Long - 1 x 4' 6'' long - Solid troughs - Some surface rust - Mostly straight & correct

Marked 32 - All have faults/defects - All troughs solid - Some surface rust - Useable

Marked 33 - All have faults/defects - Some repairable or useable & some not

Marked 34 - Used to make lambing pens & allow drinking pipe to run along wall - Some wall fixing plates - Approx 15mm holes

Marked 36 - For lambing pens - Circular slot cut - Approx 150' total length - Used to service 34 lambing pens

Marked 38 - All have faults/defects but appear useable - All have wheel or wheels damaged - Troughs have been patched with stock board - Roofs rough but functioning

Marked 39 - Spares or Repairs - Need repair or attention before use - Troughs, wheels stand all varying but mostly have faults

Marked 40 - Varying condition - Mesh & lids functioning - Troughs vary but have damage - All have wheels in varying condition

Marked 41 - In need of repair - Wheels/ trough damaged

Marked 51 - 1 Pictured but fair representation of the others - Plastic trough - Metal lid - 2' wide

Hook over - One has very minor bends - For sale as ewes have been sold

Adjustable access bars - Shelter type - One wheel damaged, other 3 fine - All metal solid including troughs

Good condition

All in good working order

1 has slightly rusty bars but still good - 1 Like new

Good useable condition

Good working order