Tyres holding air - C/w PTO shaft - C/w rear hay gates - C/w stand - This lot is part of an ongoing reduction sale due to a change in business policy. All items can be viewed by appointment with the vendors who also welcome enquiries

5' x 10' sections - 2 slightly shorter pieces - 20 metre auger - C/w couplings and brackets - Unused - This lot is part of an ongoing reduction sale due to a change in business policy. All items can be viewed by appointment with the vendors who also welcome enquiries

Mounted and manual folding - Reasonable web - Solid frame - Slight bend on linkage pin - This lot is part of an ongoing reduction sale due to a change in business policy. All items can be viewed by appointment with the vendors who also welcome enquiries

C/w hydraulic motor and pipes - Solid metal - This lot is part of an ongoing reduction sale due to a change in business policy. All items can be viewed by appointment with the vendors who also welcome enquiries

Spares or Repairs - Land driven - Bed chain snapped - Tyres have good tread - Floor mostly solid - Top beater not working as chain snapped - No holes in sides - Only used for wood chip

Massey Ferguson 20-3 Conventional Baler (S/R) - Spares or Repairs - C/w PTO - Tyres have good tread (1 soft) - Not been used in many years - Pick up tines appear straight

Working when last used 10 years ago - Barn stored until December 2024 - C/w PTO - Tyres have good tread holding air but perished - Odd pick up tine bent/missing

Tidy condition - Light surface rust with original brass badge - No known faults - Loading available

Spares or repairs - Chip to mold board - Adjuster seized - For light restoration - Come with spare lower wears part

Spares or repairs - PTO shaft - 4ft cutting width - Complete apart from swath board - Needs some attention as been sat a while - Comes with spare blade - Loading available

Spares or repairs - 4ft cutting width - Been sat a long time - Unsure if complete - Loading available

Spares or repairs - No seat - Believed there are a couple bits missing - Has its original badge - Loading available

Spares or repairs - Needs repair work to disk and hopper base - Turns over but needs restoration

David Brown ridger - In good condition - With badge - Loading available

Spares or repair - Pump does not work - Pipe & gun

3 point linkage with PTO home made linkage frame - 20 KVA single phase - C/w sockets built on & voltage output meter - Working order last used in December

Believed to be blench Harrow - 5' working width - Bought 6 months ago but never used - Points have life left in them - Ideal for small tractor - Loading available

600kg Capacity - Disc

Each sections 6' x 2' 6'' - Good metal left

All floor runners present - Metal solid

SKH overum sweden

8' working width - C/w PTO - Good working order

Marked 101 - All tines present, some tines with fault - C/w hay gates - Tyres holding air but perished - C/w PTO shaft - C/w 3 spare tines - C/w Prop stand - Some springs need replacing - Loading possible with neighbour with prior notice - These lots are part of a genuine dispersal due to retirement. Viewing and enquires are welcome by the owners.

Marked 107 - C/w PTO shaft - C/w 9 spare blades & blade changer - Tidy general condition - C/w Prop stand - Loading possible with neighbour with prior notice - These lots are part of a genuine dispersal due to retirement. Viewing and enquires are welcome by the owners.

No known faults - Good working order - Usual signs of age/use - Reliable heavy duty belt driven topper - Selling as vendor has bought new topper

Good tines

Made in Cornwall - Vintage

For potatoes, grain etc - Would unload a ton of potatoes a minute - Lifts to at least 14' - Good working order - Hydraulic lift - Manual slew - C/w drawbar - Tyres are a bit perished - Dry stored - Single phase - On 16 amp socket but will work on 13 amp plug

30 Kva - Single phase - GWO - C/w feet - No PTO shaft -ex milking standby, gone to 3 phase

Spares and repairs - Dry stored for last 50 years - Would require work to get back to working condition

Spares or repairs - Would require work to bring back to working condition - Wheels good but not perfect

Twose 670 mid mounted finger beam hedge cutter - David Brown and Massey Ferguson brackets - Hydraulic drive

Spares or Repairs - C/w PTO - Bed has gone - Gearbox is good - Tips are good - Loading available

3 point linkage - Good mat - Ready to go - Loading available

Vintage, 3 sections each aprox 4' deep by 3' wide, behind approx 9' bar with attachment link - In good working order but no longer being used, so needs a new home - Proceeds from this item is to go to Devon Air Ambulance

10' cutting width - Good working order - Forward & reverse reel direction - Independent fold down side reels - Can be used with either 3, 4 or 5 reels - PTO driven hydraulic pump - Control box currently operated from 7pin 12v light socket

C/w PTO - Loading available - Would make a good restoration project - Turns freely - Appears to be complete

Make and year unknown - Manual fold - Solid frame - Some missing chains & links but still useable - Cat 2 & 3 linkage compatible

Reinforced

Good working order - Barn stored - Gearbox & new veins fitted a couple seasons ago

New back rubber - In good working order

Hardly used

Pig tail tines - Loading avaialble

Spares or Repairs - Needs a couple pipe fittings - Worked when last used 3 years ago - Manual unfold - Shaft & user manual present - Loading available

Lights untested - Not used for 2 winters - Fully working but would benefit from some TLC

3 point linkage spreader - PTO driven

PTO driven - Requires a small patch at the bottom of the drum

In good condition - Very little rust - Everything works as it should

In good condition - Loads of wear left on points

A frame mounted - New pipes fitted - Can be loaded

Working when last used 2 years ago, now use contractors - C/w N1500 hopper extension - C/w PTO shaft - C/w Roll-over cover (some rips) - Discs free & moving - Some corrosion

Loading available - Hydraulic driven fan - 3 metering outlets - weather tight lid

Spares or Repairs - C/w control box - Wrap size 500mm - Tip ram requires welding - Was working fine until tip ram started leaking around fitting requires welding - Electrics working when last used

Spares or repairs - Gearbox bearings gone - C/w crumbler roller

In working order - Could do with a new wheel but works ok as it is

Spares or repairs - Lights not working - No rust or dents - Needs a new knife set to be working - This item is part of a dispersal sale

Used recently - Vendor will get it disconnected

Working order - Last used in summer 2023 to rotavate a garden - Some rust damage

Spares or Repairs - Parts only - Last used 10 years ago

Hydraulic fold - 3 point linkage - back bar bent

8' 9'' Wide - 3 point linkage

Spares or Repairs - Has chopped straw recently but shear bolt is loose so being sold as spares or repairs - Electrics also not working

Approx 1000m capacity - Good hydraulic pipes - C/w approx 400-500m (estimated) of slurry pipe - C/w Bayer couplings - Solid framework - Lights damaged

Auger needs attention

Suitable for water bowser adaptation or similar - Twin axle - C/w PTO shaft - Tyres holding air - Pump not used for several years but was working

Whole set of new tines - Does work - PTO present but will need a new guard fitted before use

18' flat bed with 4' extension (c/w bale wedge to make 22') - C/w hydraulic ramps - Lorry conversion on air suspension & air brackets - Twin tandem axle (tyres are 245/70/R19.5) - Hardwood wooden floor (odd hole) - Brakes & lights work - C/w Strap box - Raise & lower valve

C/w drop sides - Metal floor (rusted at front otherwise solid) - Tipping works (good pipes) - Good tyres

Twin axle - C/w Ramps - C/w Dropsides - C/w Spare wheel (new) - Solid boarded floor - Brakes working - Lights working - 4 Good tyres - C/w Axle stands for ramps - Bought new on farm

Has not been used used for a couple of years - Will require some attention to container where cracked - Tri axle trailer - Air brakes only - 6'' inlet & outlet - Full length sight glass

Marked 49 - Ifor Williams DP 120 flat bed trailer - Chequer plate floor - Jockey wheel needs replacing - Tyres have tread but perished - Removable sides & tailgate - Brakes untested - Lights will need attention

Marked 50 - Ball hitch - Tyres holding air but perished - No lights or brakes - Jockey wheel needs attention - Timber floor complete but worn - C/w extensions

Spares or repairs - Light weight trailer - Ex caravan - Lights not working - Needs new floor - Old tyres - Ex highways van back on caravan chassis

Electric controls - Hard top bale rack - Tyres show age but have good tread - Holding air

Twin axle - C/w Bed extension & front & back lades

Twin axle - Tyres have good tread & holding air - Chequer plate floor solid - Inside tidy - Hydraulic brakes - Brakes working but would benefit from a service - Lights need wiring - For sale as vendor has got a lorry - Transport available at extra cost

6' 6'' Wide - Twin axle - C/w 2 spare wheels & tyres - C/w Ramps - C/w Rear props - Brakes & lights present but untested - Floor solid but showing some decay - Tyres have good tread & holding air - Sides mostly straight - C/w Built in lashing points

C/w jockey wheel - Sturdy little trailer been used to carry water - Good tyres nearly new

No crane - Legs still work - In good working order

Serial No: SCK40000010311176 - Lights working - Handbrake & brakes working - C/w jockey wheel & spare wheel - Central partition with 2 breast bars - Aluminium floor - All tyres are good

10' x 5' - C/w mesh sides (115cm high sides) - 4 new tyres (18 months ago) - C/w spare wheel (never used) - Brakes working - Lights working - Aluminium sheeted floor

Lights present but untested - Tyres holding air with tread, some perishing - Damaged mudguards - Chequer plate floor, lifting on join - Wooden tailgates - This lot is part of a genuine dispersal sale due to retirement. A viewing day will be held on Wednesday 5th February between 10am-4pm or can be requested with the vendors. A collection day will be held on Friday 14th February where loading assistance will be available and Stags staff on-site to assist.

Twin axle - Twin 3 stage tipping rams - Odd small hole in floor - BKT tyres have good tread - Guarded lights - Brakes & lights present but untested - Tidy for age - This lot is part of a full dispersal sale due to retirement. Viewing welcomed by the owners of the items strictly by appointment. Collection of items will be by appointment with the vendors in the weeks after the sale.

3.5M X 2.3M - Chequer plate floor solid - Some rust on rams - Would benefit from a new hydraulic pipe - Lights working - No brakes - Tyres have good tread, holding air but perished - C/w Ram stay - This lot is part of a full dispersal sale due to retirement. Viewing welcomed by the owners of the items strictly by appointment. Collection of items will be by appointment with the vendors in the weeks after the sale.

C/w sheep decks - 12' long x 6' 3'' wide - 1 owner from new - C/w 2 partition gates - C/w spare wheel & tyre (new tread) - C/w front ventilation hatch - Handbrake working - Jockey wheel present - LED lights (one side damaged) but owner has ordered new unit and this will be passed to new owner - New type light lead - 4 good tyres with tread - Aluminium mud guards & tailgates - Chequer plate floor - C/w key for hitch & manual - This lot is part of a full dispersal sale due to retirement. Viewing welcomed by the owners of the items strictly by appointment. Collection of items will be by appointment with the vendors in the weeks after the sale.

21' long x 8' wide - Chassis appears solid - Bed needs renewing/attention - Been parked for a while

Spares or repairs - Model TA510G - 2900KG gross - Serial number: 87885 - Jockey wheel - Tyres perished, not holding air - Draw bar bent/twisted - Lights incomplete/missing - All brakes inoperative - Sheep decks incomplete - Has been used with sheep decks but not all parts complete - Has been stood for a number of years so condition of the floor unsure - Would need to be trailered away

Mounted on bale trailer - Tyres have good tread, holding air but perished - New LED lights - Brakes needs attention - Several holes in aluminium - Some new cross members - Chequer plate floor in good condition - Wooden loading gates - No partitions

Twin axle - Hydraulic tailboard - Tyres have some tread & holding air but perished - Twin 3 stage rams - LED light working - Floor solid - Tips as should - Original hitch - C/w spare rim

12' flatbed - 4 in-bed tie down points - LED lights - C/w Jockey wheels - Well maintained - Brake shoes replaced in 2024 & brake cables replaced in 2022

Wooden floor - Sides solid but bent - Tyres have good tread, holding air but perished - Ram not attached& does have a small leak - Ring hitch - NO brakes or lights

No front roof hatch - Some damp to front - C/w toilet, sink unit, Gas cooker, Fridge - Tyres have good tread & holding air - Lights working

C/w 2 partition gates - C/w 2 spare wheels and tyres - Brakes and lights working - Had very little use for last 3-4 years - Bought new on farm - Part of a continued dispersal sale - Jockey wheel is present but bent

Richard Western SF14 14 ton grain/silage trailer - Twin axle with flotation tyres (560/45 R22 5) - Hydraulic and air brakes - Good working order - Lights working - Grain tight (used for oil seed rape last year)

Tyres hold air - Used as a water bowser - No lid on bowser

10' x 6' floor - Serial No: SCK60000010315233 - Recently fitted new brake cables and set of rear axle brake shoes - C/w rear prop stands and toolbox - Lights present but untested - Brakes and handbrake working - Jockey wheel