Marked 124 - Approx external 33'' long x 22'' wide x 11-12'' high - No assistance with loading - These lots are part of a genuine dispersal due to retirement. Viewing and enquires are welcome by the owners.

Bought a few years ago never been used - Good condition - C/w Docking crate, ramps & stand

In good working order with added frame at the front - Replaced with a new crush

Marked 1 - Manufactured by M.J.Gould, Colyton

Marked 2 - Manufactured by M.J.Gould, Colyton

25 mattresses (bidding is on the whole lot) - Potentially an option to buy more at the end of the sale by separate negotiation with the auctioneers' and the vendor (around 250 mattresses in total). - Loading available and viewing upon request

25 mattresses (bidding is on the whole lot) - Potentially an option to buy more at the end of the sale by separate negotiation with the auctioneers' and the vendor (around 250 mattresses in total). - Loading available and viewing upon request

Worn but useable

Worn but useable - Wheels need replacing

All in good working order - Good floor

New/not used - 2.44m long - 1m x 1m internal

Brand new teat calf feeder

Brand new teat calf feeder

Brand new teat calf feeder

Brand new teat calf feeder

4 milk bar teat feeders - Used - With teats

4 milk bar teat feeders - Used - Not with teats

Well used

Well used

Well used

Good working order - Selling due to not getting used anymore

110 litre milk mixer - Good working order - 2 spare tyres

Very large quantity

6 x 4 - Brand new

In good condition - Some minor rust - Fitted with steel wheels

In good order and condition

In working order

Galvanised - Good condition

In good condition

Slightly bent lid but in good condition generally

Floor has a small hole coming in it & needs new ropes but still all working ok

12 Months old, - Number 1

12 Months old, - Number 2

C/w fittings - Good condition

Holds 50 gallons - Good strong trough - A bit stained but it will clean off (will try to clean before sale) - 3' wide, 30'' across, 32'' tall, 18'' deep

Spares or Repairs - Approx 6' across, going thin -

Requires new teats

Cast bath, previously used as a water trough - C/w ballcock - Can be loaded

No holes, perfectly usable - Barrier & trough - Some surface rust but still solid - Can be loaded

Previously patched trough - Barrier & trough - Framework solid - Can be loaded

Unused - Solid - HD plastic

C/w lid - Unused - Solid - HD plastic

C/w hangers and latch - Bent

Metal chequer plate floor - Solid - 3 point linkage - Head yoke would benefit from some grease/oil - C/w front door

Numbered 1 - Galvanised - Tin solid - No damage - C/w bolts - Tidy

Numbered 2 - Galvanised - Tin solid - No damage - C/w bolts - Tidy

Numbered 3 - Galvanised - Tin solid - No damage - C/w bolts - Tidy

Numbered 4 - Galvanised - Tin solid - No damage - C/w bolts - Tidy

Good condition

No heater - Timber solid - Metal floor solid

Complete with pins - Strong & well made - Suitable for calves or sheep

REMOVED DUE TO UNFORESEEN CIRCUMSTANCES

Stainless steel - Good order - Marked 2 - Bar is approx 5' long

Electric 240V - Dlexi dropper - Bayonet ends - C/w hand piece

Trough is sound & generally straight (slight kink in one corner) - Approx 8' long

Trough has rust damage & needs attention, mesh also has some damage, slightly bent - Approx 8' long

C/w hangers & latch - Top bar is bent - 7 Bars - Marked no 1

C/w hangers & latch - Generally straight - 6 Bars - Marked no 2

C/w hangers & latch - Straight - 6 Bars - Marked no 3

C/w hangers (no latch) - Straight & strong - 5 bars - 1 1/2'' square box made

4 Antique wheels - Needs attention (front door missing) - Roof weatherproof - Approx 9' 6'' long x 6' wide

With galvanised tin roof - Both 10' long x 8' wide - No doors

3 sections measure at 5' tall x 6' long each - 1 gate measuring at 5' tall x 8' long - Straight & solid - In good order

Milking pulsation system - Power units and 2 pulsation boxes to drive 20 milking units - C/w 20 pulsation blocks Westfalia/ Surge - Good working order - Stopped milking, genuine sale

20 Westfalia/Surge ACR - Rams and vacuum activator blocks in good working order - Stopped milking, genuine sale

Cake auger system presently in milking parlour, approx 45m of spiral tube and cake bin boot - two motors to get round corners and drop boxes - C/w 20 dropper pipes

7 gallon receiver jar for milk - C/w 40mm butterfly tap for bottom outlet

For milking parlour - Fullwood milk receiver overflow jar - In good condition

In working order

Sound and in good condition

For inserting into drums - This lot is part of a genuine dispersal sale due to retirement. A viewing day will be held on Wednesday 5th February between 10am-4pm or can be requested with the vendors. A collection day will be held on Friday 14th February where loading assistance will be available and Stags staff on-site to assist.

C/w plug & stand - Had little use - This lot is part of a genuine dispersal sale due to retirement. A viewing day will be held on Wednesday 5th February between 10am-4pm or can be requested with the vendors. A collection day will be held on Friday 14th February where loading assistance will be available and Stags staff on-site to assist.

C/w plug & stand - Some hairline cracks appearing - This lot is part of a genuine dispersal sale due to retirement. A viewing day will be held on Wednesday 5th February between 10am-4pm or can be requested with the vendors. A collection day will be held on Friday 14th February where loading assistance will be available and Stags staff on-site to assist.

Installed in 2016 and still in daily use - Available from early march (once all cows have gone) and must be removed in any case by the 10th April 2025 - C/w Chore-time feeders & troughs & augers running up to base of feed bin - C/w Milfos clusters - Drop down jetters - C/w vacuum pump - All stallwork & metalwork included except for shed RSJ's above parlour - Manual exit gates - Cotswold teat spray system & pump - GEA pulsation - Filter body & SS piping included - Can be seen working if required - Not included as follows: 2 x plate coolers, 2 bulk tanks, hot water heaters, all of which is remaining on the farm - This lot is part of a genuine dispersal sale due to retirement. A viewing day will be held on Wednesday 5th February between 10am-4pm or can be requested with the vendors. A collection day will be held on Friday 14th February where loading assistance will be available and Stags staff on-site to assist.

790 x 150

In working use until August 2024 and only being sold as ceased milking - Inc: 9 dematron 70 milk meters and 1 dematron 75 milk meter - Auto ID and Auto Feed - Direct line - C/w milk recording pots - C/w approx 100 cow collars - All galvanised stallwork, Steps, 4 RSJ's - C/w 10 milk clusters and extra 44 cluster shells - 10 Posi swingover arms - ACR - Installed October 2011 and only milk 100-120 cows a day - C/w 20 feeder hoppers and galvanised feeders and auger line and control boxes - C/w computer software (dairy plan C21) - C/w milk filter - Viewing welcome - Buyer to remove - To be removed by 30th April 2025

More available upon request

C/w compression DX tank - 3500L - Loading available - Purchaser to disconnect & dismantle

Spares or Repairs - 83mm Milk line with milk pump and receiver vessel - Out of a 15:30 parlour 20 clusters available as well

V.P.76 - Working

Spares or Repairs - Doesn't fit vendors current parlour

GEA HERRINGBONE PARLOUR FEED TROUGH DIVIDERS - New 2018 - 27 unused feed dividers with fixings

Electric 12v - Working order

Can be used in livestock sheds - Electric 12v - Working order

Some rubber & some silicone - Inc 40mm milk tube

Mostly new in bags - To inc: 8 cluster tops; 4 jar bottom 'T's; 5 ambic teat dip cups; 5 diaphram tops; used pulsation pump

Buyer to dismantle - Working when last used (ceased milking 12 months ago) & recently run up