Removed from drill

Believed to fit 1000 series 3 cylinder - Previous owner said he has removed from 4000 - Possibly to fit Tanco loader

C/w Screen & antenna - Working when last used a couple years ago - Plugged in and turned on - approx 30cm accuracy - 12v socket powered - This lot is part of a full dispersal sale due to retirement. Viewing welcomed by the owners of the items strictly by appointment. Collection of items will be by appointment with the vendors in the weeks after the sale.

Only fitted for very short time - Emag Emaw 75 Electric Motor

Only fitted for very short time

C/w box and leads - Unlocked for section control and variable rate - This lot is part of an ongoing reduction sale due to a change in business policy. All items can be viewed by appointment with the vendors who also welcome enquiries

For chemical/liquid measuring - New and unused - Closed transfer system - Frontier Wisdom systems closed transfer system - This lot is part of an ongoing reduction sale due to a change in business policy. All items can be viewed by appointment with the vendors who also welcome enquiries

This lot is part of an ongoing reduction sale due to a change in business policy. All items can be viewed by appointment with the vendors who also welcome enquiries

This lot is part of an ongoing reduction sale due to a change in business policy. All items can be viewed by appointment with the vendors who also welcome enquiries

Turns freely - No chips on pulley

Appears to be in good condition

Industrial front wheel rims - Small dent in one

Spares or repairs - Ferguson TE20 continental engine block and lower engine parts - With pistons, sump and crankshaft

working when removed and turns freely - Been stored inside

5' 6''

New, old stock

Vapormatic Vpe1050 - Fits Fiat 411, 415, DT 421, 431 - New old stock

New old stock - Vapormatic

Spares or Repairs - Very large ram - Condition Unknown

To fit Massey Ferguson 155, 158 165, 65, 765 - New old stock - Vapormatic

New old stock - Made By vapormatic

Spares or Repairs - Was working in daily use for water supply until replaced by new model during system upgrade-  Proceeds from this item is to go to Devon Air Ambulance

Please collect within 8 days after the close of the auction (collection by Monday 17th Fabruary) or delivery is possible at an extra cost to be arranged between purchaser and vendor

Please collect within 8 days after the close of the auction (collection by Monday 17th Fabruary) or delivery is possible at an extra cost to be arranged between purchaser and vendor

Mark on top is only paint gone

To fit all 65 & MK1 165 models - Been barn stored last 30 years - Has had very little use

New old stock

New old stock - Vapormatic

Genuine CNH part - Water bottle c/w washer pump

New no bolts

To fit 3-4 cylinder same tractor

New old stock

Working when last used in summer

Spares or repairs - The frame is in good condition but needs a roller or implement to be of use

Spares or repairs - One handle cracked - Some woodworm in tines

Original condition - Turns over freely

As new - Lower bonnet panel for Massey Ferguson 35

Pair of head lights

New & unused - Bought for our feed auger but doesn't fit

Will bolt on hustler bale unrolla using same bolts as 3 point linkage brackets

2 x 17'' diameter and 1 x11'' diameter

Glass present in door - C/w latch

Brand new

Brand new

Good condition - Been stored inside

Removed as changed machine

Removed from Albutt grab

Bolt on - 28'' long

Straight & strong - Main length is 6'' x 8''

Approx 32'' x 38'' high - Good glass - One hinge missing

Category 3 - Done very little

Category 4 - Brand new and unused

Complete - Replaced under warranty & never used - Came off Hi-Spec 2500 gallon slurry tanker

Has slight bend - Done hardly anything (nearly new)

Only taken off as had a bale sledge

discs to be included - 12m & headstand - Disk & gearbox in good order

Surplus to requirements as present car has different size wheels - All good no chips or bends on alloy and tyre is in good condition - Only kept as a spare previously

Tyres perished and not holding air - 5 Stud wheel rims

All tyres were taken off a low loading trailer - 8 stud wheel rims - Most tyres have tread - Have been off trailer for approx 2 years

Came off a Fendt 828 - All Michelin - 2 backs are 650/85 R38 (approx 25% tread) - 2 front are 600/70 R30 (approx 25% tread) - All hold air when came off the tractor - All IF (higher rated to go 65K)

Approx 20% tread

Tyre is damaged, just selling the rim as can't get the tyre off

Used

49cm high x 7cm wide - 1m long axle - Could be used for shepherd hut wheels

C/w 8 brackets - This lot is part of a genuine dispersal sale due to retirement. A viewing day will be held on Wednesday 5th February between 10am-4pm or can be requested with the vendors. A collection day will be held on Friday 14th February where loading assistance will be available and Stags staff on-site to assist.

Good tread - Previously fitted - This lot is part of a genuine dispersal sale due to retirement. A viewing day will be held on Wednesday 5th February between 10am-4pm or can be requested with the vendors. A collection day will be held on Friday 14th February where loading assistance will be available and Stags staff on-site to assist.

2 x 13.6 R48 - 2 x 11.2 R36 - Good tread - This lot is part of an ongoing reduction sale due to a change in business policy. All items can be viewed by appointment with the vendors who also welcome enquiries

Front is 270-95/8 R32 (alliance) - Rear are 270-98 R48 (Kleber) - Heavy duty centres - Rear tyres 8 stud - Front tyres are 10 stud - Front tyres approx 20% tread - Rear tyres approx 30% tread - No perishing

Size: 47 - Tyres perished but solid - Fitted with 650-60-42 tyres - No clamps

C/w six stud wheel tyre - Size 1065/20/457

Size: 225/75R16 - Rims not included - Only used for a week

Wellef 5 stud wheels - Good tread but perished - Would fit land rover defender

Fronts - Mitas 320/85 x 28, aprrox 80% tread - Rears - Firestone 420/85 x 38, approx 25% tread - Clamps included

385/65 x 22.5 on 10 stud wheels - 335mm PCD - 281mm centre - 1 tyre has wires showing but sound and holds air - Other is good - Ideal for xmas day spares

Both sound - Approx 10% tread

Approx 50% tread

540/65/24 - Good condition

Tyres perished

2 with very good tread, 2 part worn - 245/65 R17 - Replaced as new wheels with alternative tyres purchased - Alloy centres

Spares or repairs - 600/65 -38 - 25% tread -

No visual signs of perishing or cracks - Tread is approx 70% - No previous repairs or punctures - These tyres have been stored indoor & out of sun light

Tyre size 205/80/R16 - Brand new

Off west dual spreader - Good tread & hold air - Light scratches on one tyre - Will be removed from spreader

1m diameter

SET OF FRONT & REAR JOHN DEERE WHEELS/TYRES - Rear tyres are row crops being Michelin 14.9 R46, approx 60% tread, no marks or perishing, 6 stud - Front tyres are Kleber 420/85 R28, approx 30% tread & some perishing, 10 stud - Came off John Deere 6930 Tractor

Rears are Taurus 12.4/R46 20% - Fronts are Alliance 11.2/R32 40%