Spares or repairs - Blade edge in good condition - Some holes in base (see photos) - A cheap bucket for someone looking for a winter project - Trima bracket - Width: 5'5'' - Holes in bottom

5' wide - Metal floor - Please note the property has been sold and the vendors are moving on 13th December 2024. This lot is to be removed by Wednesday 11th December 2024

Pin & cone brackets - All tines present & generally straight (9 tines recently replaced) - Good working order - 6' wide - 3 Rams - ''Please note that the vendor is away and items cannot be collected until 15th December 2024.''

New brush recentlyu adn hardly used since - Slightly bent on front - Brackets to weld on present - Used last year - Working order (Vendor recently ran up) - New motor approx 2 years ago - ''Please note that the vendor is away and items cannot be collected until 15th December 2024.''

Pallet fork attachments - Bucket is 700mm wide - Vendor bought but never used - ''Please note that the vendor is away and items cannot be collected until 15th December 2024.''

No visible damage - Can be loaded

Working order - Ready to use

Trima bracket - 2 missing tines

Come off Albert Grab - Heavy duty

4' Fork lengths - Not sure of the rating but would think approx 3 tonne - Locks work as they should due to change in telehandler and headstock

4' - Assume 4+ tonne lift but not got a plate to confirm - Vertical steel is 2'' x 5'' thick - Will fit direct onto merlo headstock - Selling due to change of telehandler & headstock

2024 JCB EURO8 HEADSTOCK HYDRAULIC CORSS OVER BRACKET - Mounted brackets - Hydraulic quick hitch euro 8 headstock converter fits JCB Q fit - Brand new hydraulic euro headstock welded onto JCB Q fit brackets - Very little use - Selling due to change of telehandler & headstock - With this attachment you can use all of your tractor loader attachments with your telehandler

35mm coupling/pin size

35mm coupling/pin size

35mm coupling/pin size

35mm coupling/pin size

Chilton/ MX brackets - In good condition - Done very little work - C/w side bar - Attachable either side

59cm wide - Good teeth & edge - Pine holes 8cm - Middle of pin hole to middle of pin hole 45cm

50'' wide - Good teeth & edge pin hole 6cm - Middle of pin hole to middle of pin hole 40cm

200cm wide 58cm deep - Good cutting edge - Pin size 8cm - Middle of pin hole to middle of pin hole 45cm

Spares or repairs - Brand unknown - Mounting brackets - No hydraulic pipes - Bucket will need some repair

Spares or Repairs - Manitou brackets to be removed

Came off Massey loader - Believed to be quickie - Viewing welcome

C/w hydraulic pipes (some rust & perishing) - Digger mounted - For sale as no longer needed

Euro 8 bracket

Chilton bracket - Width: 5' - Working order - Surplus to requirements - All tines present

Has been used on a John Deere and will fit most tractors with the 3 point linkage

Believed to be matbro teleporter brackets - Fork carrier, no forks included

Bought by us from new - Overall width 6' 1'' - Scraping width 6' 6'' - Good rubbers all round - No cracks or welds - C/w pins - Will go straight to work - Always been kept upto good standard

Some rust and holes on bottom barriers but still useable with strong frame - Could easily be improved - Very strong upper frame and bars, some odd bends - Can be loaded

Part rolls of stock netting and barbed wire - Taken down recently around garden boundry

240V - Can be wall mounted - PAC tested 24-9-24 until 24-9-25 - For chickens, poultry, gease and turkeys

C/w spare filter - Never been used

For 12' gap - Slight bow angle - Weathered but solid

11T side shute feed bin - Leaks at base of cone - Purchaser to remove - Bolted in to concrete at bottom - Bin marked 2 (Left hand bin NOT included)

Hampshire 2000 Wet Mix feeding system for Pigs - Tank: 3000L Fibre Glass - Pump: 5.5hp Single Phase - Mixer: 1.5hp Single Phase (all sorts of applications)- Photographs are dated 2022.

5 years old - Good condition

Portalsol gas dehorner/ disbudding - Used condition

Portalsol gas dehorner/ disbudding - Used condition

22 Double cubicle rails - 45 Single cubicle rails - Good condition - Fixings included

Heavy duty - 15 bar - Bent and middle bracing bar is broken - C/w hangers (no latch) - Marked 1 - 'This lot is part of a Phased Dispersal. The vendor having ceased milking cows 2 1/2 - 3 years ago'

4 x 3 1/2'' diameter latching posts (6' 6'' long) - 1 x 4'' diameter hanging post (6' long) - 'This lot is part of a Phased Dispersal. The vendor having ceased milking cows 2 1/2 - 3 years ago'

Heavy duty - 5 bar - C/w hangers & latch - Bottom and top bars are bent - Marked 2 - 'This lot is part of a Phased Dispersal. The vendor having ceased milking cows 2 1/2 - 3 years ago'

Heavy duty - 5 bar - C/w hangers & latch - Generally straight (cross bar is bent) - Marked 3 - 'This lot is part of a Phased Dispersal. The vendor having ceased milking cows 2 1/2 - 3 years ago'

Heavy duty - 5 bar - C/w hanger & latch - Middle up right bar needs attention, otherwise straight - Marked 4 - 'This lot is part of a Phased Dispersal. The vendor having ceased milking cows 2 1/2 - 3 years ago'

7 Bar - C/w hangers & latch - Needs attention, missing half of top bar & bent in one corner - Marked 5 - 'This lot is part of a Phased Dispersal. The vendor having ceased milking cows 2 1/2 - 3 years ago'

5 Bar - Heavy duty - C/w hangers (no latch) - Missing part of one bar and missing up rights in middle - Slight kink, otherwise straight - Marked 6 - 'This lot is part of a Phased Dispersal. The vendor having ceased milking cows 2 1/2 - 3 years ago'

Heavy duty - C/w hangers (no latch) - Bottom corner has rust damage - Gate is bent - Marked 7 - 'This lot is part of a Phased Dispersal. The vendor having ceased milking cows 2 1/2 - 3 years ago'

C/w hangers & latch (one hanger bent) - 5 Bar - Heavy duty - Missing bottom bar, otherwise straight - Marked 8 - 'This lot is part of a Phased Dispersal. The vendor having ceased milking cows 2 1/2 - 3 years ago'

C/w hangers & latch - 7 Bar - One bar slightly bent, otherwise straight - Marked 9 - 'This lot is part of a Phased Dispersal. The vendor having ceased milking cows 2 1/2 - 3 years ago'

Heavy duty - 5 Bar - C/w one hanger & latch - 2 bars slightly bent - Marked 10 - 'This lot is part of a Phased Dispersal. The vendor having ceased milking cows 2 1/2 - 3 years ago'

7 Bar - C/w hangers & latch - 2 bars bent, otherwise straight - Marked 11 - 'This lot is part of a Phased Dispersal. The vendor having ceased milking cows 2 1/2 - 3 years ago'

Heavy duty - 5 Bar - C/w hangers & latch - Generally straight, very slight kink - Marked 12 - 'This lot is part of a Phased Dispersal. The vendor having ceased milking cows 2 1/2 - 3 years ago'

C/w hangers & latch - 5 Bar - Straight & complete - 'This lot is part of a Phased Dispersal. The vendor having ceased milking cows 2 1/2 - 3 years ago'

C/w hangers (no latch) - 5 Bar - Straight but split in side - 'This lot is part of a Phased Dispersal. The vendor having ceased milking cows 2 1/2 - 3 years ago'

7 Bar - C/w hangers & latch - Slight kink on top bar, otherwise straight - Marked 13 - 'This lot is part of a Phased Dispersal. The vendor having ceased milking cows 2 1/2 - 3 years ago'

Heavy duty - 4 bar - C/w hangers (no latch) - slightly kinked - Marked 14 - 'This lot is part of a Phased Dispersal. The vendor having ceased milking cows 2 1/2 - 3 years ago'

Heavy duty - 5 Bar - C/w hangers & latch- Missing 2 parts of bracing bars (cut out), some rust damage on bottom bars, otherwise straight - Marked 15 - 'This lot is part of a Phased Dispersal. The vendor having ceased milking cows 2 1/2 - 3 years ago'

Heavy duty - 5 Bar - C/w hangers & latch - Some rust on bottom bar - Straight - Marked 16 - 'This lot is part of a Phased Dispersal. The vendor having ceased milking cows 2 1/2 - 3 years ago'

Heavy Duty - 5 bar - C/w hangers & latch - Some rust on bottom bar - Generally straight - Marked 17 - 'This lot is part of a Phased Dispersal. The vendor having ceased milking cows 2 1/2 - 3 years ago'

All been cut off at ground level when removed - All approx 4' to 4 1/2' long - To include: 1 x 5'' diameter round & 3 x 4'' diameter square hanging posts - 'This lot is part of a Phased Dispersal. The vendor having ceased milking cows 2 1/2 - 3 years ago'

1 x 5' long & 1 x 4' 6'' long (3' 6'' high) - Both bottom bars bent & showing rust - 5' long on also bent - Marked A - 'This lot is part of a Phased Dispersal. The vendor having ceased milking cows 2 1/2 - 3 years ago'

Both 7' long & 3' high - Both generally straight (one with rust showing in middle bars) - Marked B - 'This lot is part of a Phased Dispersal. The vendor having ceased milking cows 2 1/2 - 3 years ago'

All 7' 6' long & 3' high - 2 have one bar missing - All generally straight but all have some rust showing - Marked C - 'This lot is part of a Phased Dispersal. The vendor having ceased milking cows 2 1/2 - 3 years ago'

6' 3'' Long x 2' 3'' high - Heavy duty - Slightly bent in middle & on one end - Marked D - 'This lot is part of a Phased Dispersal. The vendor having ceased milking cows 2 1/2 - 3 years ago'

All 10' long x 2' 3'' high - Heavy duty - All bars present & generally straight - Marked E - 'This lot is part of a Phased Dispersal. The vendor having ceased milking cows 2 1/2 - 3 years ago'

4 Bar - Heavy duty - Rust showing on bottom bar - Generally straight - Marked F - 'This lot is part of a Phased Dispersal. The vendor having ceased milking cows 2 1/2 - 3 years ago'

Approx 5' wide x 4' 6'' high - 4 bar - Heavy duty - Slightly wider one end - Marked G - 'This lot is part of a Phased Dispersal. The vendor having ceased milking cows 2 1/2 - 3 years ago'

4' 6'' high - C/w Dung board bottom (slightly damaged) - C/w Middle bar - All bars straight & barrier straight (some rust showing) - Marked H - 'This lot is part of a Phased Dispersal. The vendor having ceased milking cows 2 1/2 - 3 years ago'

4' 6'' high - C/w Dung board bottom (slightly missing) - C/w Middle bar - All bars straight & barrier straight (some rust showing) - Marked I - 'This lot is part of a Phased Dispersal. The vendor having ceased milking cows 2 1/2 - 3 years ago'

Heavy duty - 5 Bar - C/w hangers & latch - Bent in bottom corner, otherwise straight - Marked 18 - 'This lot is part of a Phased Dispersal. The vendor having ceased milking cows 2 1/2 - 3 years ago'

Approx 6' 4'' x 2' 10'' wide - 'This lot is part of a Phased Dispersal. The vendor having ceased milking cows 2 1/2 - 3 years ago'

Approx 3' 6'' high - C/w hangers & latch - Straight (some rust showing) - Marked 19 - 'This lot is part of a Phased Dispersal. The vendor having ceased milking cows 2 1/2 - 3 years ago'

Approx 3' 6'' high - C/w hangers & latch - Straight (some rust showing) - Marked 20 - 'This lot is part of a Phased Dispersal. The vendor having ceased milking cows 2 1/2 - 3 years ago'

3' 7'' Wide x 5' high - C/w hangers & latch - Chicken mesh bottom - one piece of wood broken - 'This lot is part of a Phased Dispersal. The vendor having ceased milking cows 2 1/2 - 3 years ago'

12V

8' wide - C/w 'A' frame attachment & pallet fork attachment - Trough has rust damage - Vendor has repaired centre post - This lot is part of a genuine dispersal, due to the vendor ceasing keeping cattle, having had a small suckler herd.

Galvanised - C/w Salter LS300 weigh box (& charger) - 3 point linkage & pallet fork attachments - Chequer plate floor - Straight - This lot is part of a genuine dispersal, due to the vendor ceasing keeping cattle, having had a small suckler herd.

Chequered floor - Self locking yolk - Rotating rump bar in good condition - Dry stored

Heavy duty calving aid - C/w ropes - 2m pole and swivel head in good condition - Dry stored and clean

Hip grip cattle hoist - Good condition - Little use and dry stored

Under belly cattle hoist - In good condition - Lift up securely and humanely - Dry stored and complete

Rumen drenching/ hydrating pump for cattle - In good working order

Heavy duty toe cattle clippers - In good order - Dry stored

In good condition - Only used for 20 bales

C/w lead up/down ramp - 4 x 8' sheeted hurdles 2 x 5' sheeted hurdles - Chequer plate floor with ridges - 1 x galvanised guillotine gate - 4' hurdle - Tyres with tread (some perishing) - Ball hitch - C/w 6 pins

Fencing ties & fixings - Hangers, latches, hangings

25mm squares on panels 1 x 5' x 3' approx 1 x 4' x 2' 6'' approx - Part roll of mesh

Approx 2.4m x 1.1m - Good condition - Cost £395 5 years ago

4 x 9ft - 1 x 6ft

0-150KG - No front glass but very clean and tidy

Unsure of age, but in good condition

C/w ball valves - All working when removed - Only removed as no longer keeping cattle

Approx 9ft 6 x 3ft 6 - Holds water and in good condition - Only removed as no longer keeping cattle

C/w ball valve - Holds water and only removed as no longer keeping cattle

230v - In good working order - Only removed as no longer keeping cattle