Trailer length 10ft - Carrying capacity 3500K - Electric and manual tip, high sides - Tyres good - Brakes and lights working

Tri axle enclosed transport trailer - Full size aluminium tail ramp - Internal lashing eyes - Brakes in working order - Bed size 26x8ft 7ft high - Tows well - Capacity 3500kg - Lights and brakes working

Tows okay - Floor condition, well used - Tyres usable

Carrying capacity 3 tonnes - Tipping ram leaks - Tyres holding air Floor condition bad

C/w removable mesh sides & ramp. 7' 3'' x 4' 7'' - All lights working - Recent new jockey wheel - Spare wheel

10ft long, rams work - Trailer has additional grain sides, plus tailgate which needs repairing

Tows well - Good tyres - Lights working - C/w cover - Wooden floor & sides

Lights present & working - Handbrake & brakes not working - Metal floor, good condition - C/w ramps - All tyres 50% tread, all holding air but could do with replacing - Hitch could do with replacing as damper inside has gone

1 Tyre soft & perished - No brakes or lights

3 tyres soft - Some holes in floor - Lights present but untested

Timber solid - Both tyres have good tread and holding air - Lightboard present but untested

Tyres holding air (1 new tyre) - No lights - Ball hitch - Wooden floor -

Tyres holding air - Timber floor - Ball hitch - Lights need attention

Serial No: 1878080 - Good sound trailer - Tyres good - Unsure if brakes are working

C/w solid tailgate - Needs new side panels on one side - Needs one tyre putting on the rim - Great project

Tows and tips fine - Max gross weight 2100kg on ring hitch - Has good flotation tyres both holding air with good tread - Has some rust, hole on front of trailer

Magic tailboard - New tyres - 10 stud axle

C/w tarpaulin canopy top - Single axle - Boarded floor + mesh 1/2 top - 160cm x 105cm - C/w spare wheel - Lights work - Tidy condition

10' x 5' - C/w mesh sides (115cm high sides) - 4 new tyres (18 months ago) - C/w spare wheel (never used) - Brakes working - Lights working - Aluminium sheeted floor

Twin axle - 25' Marshall demountable livestock box (c/w sheep decks and 25' Marshall Bale Trailer - Livestock box has winch (battery will be needed to operate) - All 4 tyres were new 2023 (340/65 R18) - No brakes or lights - Trailer bed needs attention, livestock box has had a lot of use

Twin axle - 385/65 R22.5 tyres (3 with little or no tread) - C/w silage sides (not photographed) and not used for 6 years approx - Grain tight - Hydraulic tip - Good floor & chassis - Brakes and lights work

1 owner from new - Approx 8 years old but had little use - C/w spare wheel & tyre - 12' x 6' x 6' 6'' high - Extra height for horses and breast bar - Jockey wheel & handbrake present - All rear lights present and should work but untested - Some front lenses/lights need attention - C/w cattle partition gate - Barn door style opening tailgate - 4 tyres with very good tread - Twin dirty water outlets - Folding ventilation/ wash out flap at front

Made for small bales/ plants - Carrying capacity is unknown but has carried a 5 tonne digger comfortably - Steel floor in good condition - Tyres ok condition but perished - No lights or brakes - could possibly clip ramps onto front

Spares or repairs - The van is damp - Floor is good - Tows well - Tyres are okay - Lights working, ideal storage - Working oven - Working toilet - C/w jockey wheel

Spares or Repairs

18' flat bed with 4' extension (c/w bale wedge to make 22') - C/w hydraulic ramps - Lorry conversion on air suspension & air brackets - Twin tandem axle (tyres are 245/70/R19.5) - Hardwood wooden floor (odd hole) - Brakes & lights work - C/w Strap box - Raise & lower valve - ''Please note that the vendor is away and items cannot be collected until 15th December 2024.''

Tidy paint - Hydraulic tailgate, c/w Grain door - Lights present with guards but untested - Solid sprung drawbar - 4 tyres with good tread - Generally tidy order - Good hydraulic pipes visible - No holes - Inspection ladder - Twin ram tipping - ''Sale due to loss of ground & change in business direction''

3500 Carrying capacity - Trailer bed size 12' x 6' 6'' - Lights present and working - Brakes working - C/w handbrake - C/w spare wheel, needs replacing - C/w Jockey wheel - C/w loading ramps - Drop down sides - Wooden floor with patch - Tyres in good condition - Bed needs attention but useable - Used daily

Wooden sides & floor all solid - Good tread on tyres - Hole in canvas top - Trailer ramp right to shut - No light present - Tailboard a little tight

4.5 8.2 inside, 1' side wall - 3000kg - Brand new floor, hitch, jockey wheel & galvanised - Serial Number: 1336 - Lights present and working - C/w spare wheel - New buffalo board floor - Tyres have good tread

Spares or Repairs - Serial number: CD87/001 - Lights present but untested - Brakes untested - C/w Jockey wheel - Alloy in good condition - Decent amount of tread left on the tyres - Missing a wheel brakes, need work - Still tows ok

Metal solid floor - Tyres have good tread - Lights untested

Double deck - Serial number: 59851005 - Lights, breaks & handbrakes working - C/w jockey wheel - C/w Spare tyre - C/w Sheep decks wind in and out on w winch spring loaded, Sheep/ cattle partition gate - Detachable livestock container - Tyres approx 75% tread - In good condition

Useful for farm or smallholding lightweight solid steel container built on heavy car sub frame - Drop down tailgate - Brackets for light board (lights not included) - C/w jockey wheel - Trailer length: 2 x 1 x 1m body - Brakes untested - Steel sheeted floor, sound - Tyres holding air

Serial number: 5149618 - Lights present and working - Air & oil brake type - C/w hydraulic tailgate - Solid floor apart from some corrosion in one corner where water pooled and warn a bit - Average tyre condition, Ignore the floatation, the trailer will be on all super singles

2016 PF 24’ trailer with 2005 Williams livestock container mounted on it. - Container has sheep decks with electric run up ramp - 4 x sheep division gates - 1 x Cattle division gate - Trailer is running on commercial axles with 17.5 duel wheels - Trailer is also running on air and hydraulic brakes - All lights working and trailer had a Tilly trailer test 15 months ago - Container is Red Tractor assured - Good working trailer - Only for sale as the vendor has a lorry now.

Made from a land rover rear tub - No brakes or lights - Tyres holding air and have a good tread

7' 7'' wide bed - Tyres holding air, one tyre very good others lacking tread or perished - Part wooded floor - Lights present but untested - Solid drawbar and chassis - Front lade - This lot is part of a genuine reduction sale of predominately high-quality sheep & cattle handling equipment due to the passing of the late Mike Tewson. All lots can be viewed by appointment with the vendors or on the viewing day on Friday 6th December between 10am-3.30pm A collection day will be held on Friday 13th December between 9am-3.30pm where stags staff and a telehandler will be available to assist with loading. Other collection days & times will be possible strictly by appointment only.

1 owner from new - Lights present (cracked lenses) but untested, but believed working - C/w grain shute - 3 tyres with good tread, one fairly worn - Solid trailer, no holes - Removable/dropdown sides - Twin ram - Hydraulic brakes

Extremely robust - Complete with Quick Fit JCB brackets - Toughened steel tines as new - Female hydraulic couplings - Was used on a JCB 540 70 machine - Machine measure 86 x 36 x 36 inches - Approx 2.1m width

Homemade concrete rear tractor weight - I do not have any farm machinery to help with loading of this piece of equipment but I may be able to arrange assistance if required but please contact before hand

40mm pins, never used

Used condition

C/w Tanco Brackets - C/w removable sleeves - Not used for 2 years - 'This lot is part of a Phased Dispersal. The vendor having ceased milking cows 2 1/2 - 3 years ago'

Quicke No3 brackets - Good floor but cutting edge needs attention - This lot is part of a genuine dispersal, due to the vendor ceasing keeping cattle, having had a small suckler herd.

Solid metal - 1m forks

Small bale straw chopper - Not been used for a few years - Put away working - Dry stored

Forward, backwards tilt - Side-shift - 3 point linkage mounted - Strong forks

Heavy duty construction - Adjustable blade angle position - Came off Kubota tractor but comes with multiple brackets and can be adapted to fit most makes and models

2016 Digbits - 45mm pin size - Approx 182mm inside width between pins - Approx 310mm pin centres

Chilton brackets - Solid metalwork - Bottom tines all solid - Good hydraulic pipes - Twin rams

Euro brackets - 8.5'

Not done a lot of work

Euro brackets

1.9m wide - JCB brackets - 2 tines missing - 1 ram pitted but doesn't leak

Forks can be slightly adjusted - Forks are 42'' long

Slight hole and bend in back wall - Edge worn

Floor appears solid - Chain included - C/w Pallet fork slots

No brackets - Some perished hydraulic pipes

Some rust but generally still solid except one visible hole - Old Quicke brackets

Surplus to requirements - Very heavy duty

3 good tines - Solid metal - Bent pins but solid

Designed to fit Fendt 700 series - Originally fitted to the earlier type 700 fendts - Was later fitted to a S4 Profi 716 - These brackets were used on a Q75 loader - Diverter valve comes with the brackets

7 finger timber grab for a 13 ton Excavator - Came of JCB JS 130 LC

9 tines - Approx 6' wide

Spares or repair - C/w mounting brackets - Trip loader and brackets to fit BMC mini or Leyland 154 - C/w muck fork - Will require some new hoses

2 metres long - Please collect within 8 days after the close of the auction (Collection by Monday 16th December) or delivery is possible at an extra cost to be arranged between purchaser and vendor.

2 metres long - Please collect within 8 days after the close of the auction (Collection by Monday 16th December) or delivery is possible at an extra cost to be arranged between purchaser and vendor.

Moving with ball and in combination - Please collect within 8 days after the close of the auction (Collection by Monday 16th December) or delivery is possible at an extra cost to be arranged between purchaser and vendor.

Dry stored - Untested, looks ok levers move freely, needs new oil return pipe - Forks believed to be correct but not fitted - Hydraulic top link

Euro brackets - No longer have dairy cows - Good hydraulic pipes - Tines solid - Being sold as no longer have dairy cows

Spares or repair - Skid steer style brackets - Some corrosion - Hydraulic pipes need replacing

8' auger bucket - Q fit brackets - Good working order

For auger or breaker etc

3 spikes solid - Ready to work

Pin & cone weld on brackets - Bought new on farm - Only used in one season in 2022 to do 8 artic loads of sawdust - Tidy condition - ''Please note that the vendor is away and items cannot be collected until 15th December 2024.''

C/w 2 augers (1x8'' & 1x6'') - Working when last used (vendor will run up before sale) - Petrol

Needs repair - Solid edge - Can be loaded

Fork lengths: 1.2m - Previously fitted to a front weight block on a Massey

30'' width

To fit on back of power harrow to fit to 3 point linkage

To suit Merlo Telehander 1.58m3 - Solid grab, clean hydraulic ram and pipes - Width: 7' 6'' - Superficial rust but will go straight to work - Only selling due to change of telehandler and headstock - Tines and worn visually but all solid and tight -

Good condition solid bucket - Merlo bracket - Width: 7' 6'' - Slightly worn front edge but solid - Selling due to change of telehandler and headstock

Very solid bale spike - Homemade centre and bush welded onto new frame and tine suitable for round bales - Only 2 years old

Solid grab ready for work - Merlo bracket - Almost all new tines and the framework is in very good order - No cracks or welds to my knowledge and cuts straight - Rams and pipes all in good order, work as they should, selling due to change of telehandler and headstock - This grab has not been used for the past 3 years as no clamp silage made

To fit bucket - Fully refurbished - Brand new brushes, spacers and pipes fitted - Eastern attachments - Very good condition, will fit to brackets on any bucket, was used on telehandler - Had very little use from new but was left outside so new brushes and spacers were needed - Selling due to not being used

Complete set of 10 class tractor weight - With bolts - Good condition - Loading available

Cat 1/2 linkage