One tyre flat - Lights and brakes untested - Cage sides - Body is 14' long x 5'6'' wide - Aluminium floor and ramp - Rear jacks - Has been used to move sheep around

14' - Flatbed - Owned from new - Tyres good & holding air - C/w spare wheel, never been used - Brakes & lights in working order (needs one new front light) - Photographed with extension back & lade & ramps which ARE NOT INCLUDED in the sale - Original headboard will be fitted.

Removed from mitsubishi canter - Very good condition - Little use - 10' 6'' long x 6' 10'' wide - Drop sides & tailgate - Hydraulic ram present (some rust spots)

20' x 8' wide - Twin axle - One stub slightly bent - Hardwood floor - Brakes & lights untested - 3 flat tyres - Contents not included

Lights and brakes present but untested - Tyres perished but holding air - Handbrake working - Serial No. 24636 - Assistance with loading available if required.

1080mm long, 830mm wide

2055mm x 1120mm - Needs a new tyre

With Botex 360 Loader - 12' long - 10T carrying capacity - Lights present and working - Brakes working - Tyres in good condition - No leaks and all working - Being sold as no longer needed

C/w spare wheel and tyre (tyre very good) - No decks - C/w cattle partition - Purchased new in 2024, manufactured 2023 - C/w chequer plate mud guards - 14' tri-axle trailer - LED rear lights present and working - Open front ventilation - All tyres with reasonably good tread - Brakes working - Very tidy trailer

C/W spare wheel and tyre (unused) - Approx 2 years old - 1 owner from new, sale due to new quad bike not fitting - C/W front prop - 2 good tyres - Rhino board floor - Lights present and working

Made by Premier Luxury Loos - Lights and brakes present - Tyres holding air with good tread - Rhino board floor - Twin sprung axle - Lades (front, rear and centre) - Some rust on chassis

Lights present but not working - All metal with removable internal partitions - Tyres in good condition - Solid old style Rappa trailer

6' long x 4' wide - Lights and brakes working - Tyres good - Holding air - Roller shutter door - Dry inside - Jacks present

Spares or repairs - 45'' x 89'' internal size - Brakes not tested - No lights fitted - Was made to carry an ATV

Starts, runs and works - Tyres holding air - Ex National Grid - 15 KVA - Silent run - 4 cylinder Lister diesel engine - Missing exhaust - 16 x 32 amp sockets - Jacks present - Lights and brakes present - untested

Single axle - Unbraked - C/w cover - Good tyres and lights

Bed length 8' - SN: SCK60000060481127 - Lights present & working - Brakes working - C/w jockey wheel - C/w spare wheel - New floor - Tyres in good condition - Hand brake handle broke but brakes are not locked on

Bed length 8' - Lights present & working - Handbrake & brakes working - C/w jockey wheel - C/w spare wheel - Like new floor - Tyres in good condition

C/w spare wheel - Tipper all works - Lights, etc - In good condition

New roof and renovation needed

Fully lined - Some holes - Been used as office - Fitted with toilet - Can assist with loading

1' wider than a normal container - Fitted to food standards - New corrugated roof 2 years ago as it was deteriorating - Does not include any of the items within the container in the picture just the container itself

Made of insulated sheets and finished up to food hygiene standards - Due to it being attached to another building, once dismantled and removed it would have one side that would be open - Buyer to dismantle but help can be provided - None of the items within the building are included

Approx measurements - Used as site hut but no longer needed - Solid and water tight - Window shutters, electrics with one striplight and sockets which work a bit but not PAT tested - No key for the door but can be locked with a padlock (not provided) - Can load but no artic access - Will be empty before collection

Single use - can assist with loading

Dismantled ready for collection - Was working and in use until a couple of years ago however not tested or used recently - C/w motor - Measurements unknown but 95'' High

Insulated - Hot & cold running water - Lights, etc - Built this year as new - Can help with loading - Can help with delivery at extra cost

Unfinished project - No doors or windows - Douglas fir timbers - Dovetailed joints - Each side is 5m long - Footprint 64m2 (approx) - Very substantial project - Viewing recommended - Could be delivered/finished at extra cost

Serial Number: SGES000EXFAVA0081 - Lights present and working - C/w spare tyre, handbrake, jockey wheel, working toilet, working oven - 4 Berth - Good tyre tread - Excellent condition with adaptable family layout (can make 4 single beds or 2 double beds)

Ideal for glamping, home office or garden room - Substantial metal chassis complete with cast iron wheels - Insulated floor, walls and ceiling - UPVC doors and windows, glazing not fitted for ease of transport - Sockets and lights installed - External measurements: 4946mm x 2300mm - Internal measurements: 4735mm x 2086mm - Min height: 2041mm - Max height: 2264mm - Viewings welcome - Buyer to arrange collection - NO loading available

Beautiful handmade shepherds hut - Just finished and ready to use - 2.59m wide - 3m long - On new chassis with turntable

Shower with a gas hot tap boiler & a gas bottle just attach to a water pipe and use - Used once

4'2'' wide - Chiltern brackets - Good condition - Used recently - All tines and cutters present

Came off a 2000 hour machine - C/w locking pin & ram.

Very tidy - Tines all present - Has had another set of brackets welded on

No brackets welded on - 2 new pipes - Pin & bushes tight - Non removable sleeves - Can be loaded

Euro 8 brackets - Removable tubes for the bale spikes - One spike has slight bend, doesn't effect use

Good condition for age - Rams in good condition with no leaks - All working as it should be - Handy bit of kit - Loading available

Six months old - 7ft width - Euro 8 bracket - Done hardly any work - No faults at all - Selling as too big for tractor

Removed from International B250 - All complete - C/w bucket & tipping ram

Tractor mounted - Cat 1 pin size - 1.1m width - 200l hopper - This has never been used but is very shop soiled

Euro brackets - 1200mm length of forks - Very shop soiled

Suitable for MF135 or similar - Loader boom - Heavy duty bale spike - Concrete weight block - Mechanical loading can be arranged but vendor requires a few days notice to organise

Little work

Euro 8 brackets - Max 1500kg each arm - Tidy - Surplus to requirements

On euro brackets, BRU200 - 2.0m width - As new only used a handful of times

Was a shear grab - Several tines missing - Quicke 3 brackets

Two 2 foot spikes - Tines are loose

Solid spikes - Believed to be Faucheux brackets

Some small holes/rust flaking - Believed old style Faucheux/Quicke brackets

Very heavy (steel welded to bottom) - Solid

C/w manitou brackets - Outside tines have been taken off - Working order - Twin ram

Have been cut off with gas.

To fit Merlo - 7'9'' wide - Good strong bucket - Some cracking/splitting to bottom

Quicke No3 brackets - Some rust holes in base - Useable condition

On Manitou brackets - Strong bucket, some wear on cutting edge and a few holes in bottom - Galvanised sutton brush - Has had a repair on arm - Brush good

Manitou brackets - 1780 litre capacity - Blade in good order - Little use - No holes - Only used for grain

Pin & Cone brackets - Approx 5 tines damaged - Pipes present - Some damage to mesh - Vendor has the rams but not fitted

Hard PX tines - Good working order - Some rust on rams - Chilton brackets - Done little work for age - Genuine dispersal due to relinquishing farm tenancy.

Good working order - Chilton brackets - Genuine dispersal due to relinquishing farm tenancy.

Manitou brackets - Good working order

Euro brackets - Good working condition - Used a handful of times

With manual trip tip - Selling as no longer needed - In overall good condition - Some surface rust/blistering on base but still sound

Euro bracket - Four tine bale spike

Spares or repair - Euro 8 brackets - Age and brand unknown - Needs attention/welding but repairable - All tines present - No rams or hoses

In working order - Used until recently - 7' wide - Tines all present and straight - Sanderson brackets - Selling due to upgrade

3 point post/stake carrier - Ideal for transporting fencing stakes and posts

Bobcat bracket - Good condition

Euro brackets - As new condition only been used for light use previously

60mm pins

Euro 8 brackets - Top bar needs welding.

Pin and cone bracket - Useful attachment

Fits on front loader spikes - Carrier is approx 173cm x 126cm

Fitted with MX brackets - Good condition - Selling due to retirement

Good condition

Hydraulic tipping - 3 point linkage - Little use

1m long - Adjustable width - No damage/cracks.

Including rams and a spare spike - Previously fitted to a David Brown

No forks

Removable tubes for use of spikes - Manitou or Euro brackets - Top hoop come with - No pipes

Fleming 09 HDBBT - 3 point linkage - Surplus to requirements - In working order

On quick fit bracket

12'' toothed bucket - 28mm pins - Used on a micro excavator

EURO 8 WELD ON LOADER BRACKET

For John Deere

Good condition - 2 cubic meter front bucket

Good condition

5 weights - Marked 276-43R - Thought to fit John Deere 4020

2 wheel weights - Thought to fit John Deere 4020 - Marked A3404R

Approx 80kg each - Unknown what removed from

3 point linkage

Spares or Repairs - Oil drum filled with concrete - 3 point linkage - Would benefit from a new bar

On Euro 8 bracket and A frame - Good and strong - 2' x 2' concrete block

3 point linkage (damaged) - Concrete is approx 110cm wide x 40cm thick and 85cm high - This lot is part of a genuine dispersal on behalf of a deceased estate and the farm is being sold. - Please note that much of the machinery equipment has not been used for many years and the farm has no capability of loading heavy or large lots.

50kg each

50kg each

50kg each