Working order - Last used Summer 2026 - Slight oil weep on one ram and one side roller is a bit noisy - Hydraulic folding - Approx 12' working width - C/w PTO - Solid metal work but showing rust - Good tyres

Working order - Very good wearing metal & comes with some spare shares & points - Used last season - Sale due to reduction in arable production

Very Tidy Condition - 1 Farmer Owner from new - Joystick Controls - New Flails last year - Greased Religiously - Any inspection / enquiries welcome

Swivel shute - C/w PTO shaft - Mounted - Viewing and enquiries welcome

2018 show model - 540 PTO - Belt driven - Used for the first time in 2019 - One owner - Barn stored - Trailed machine in excellent condition.

C/W PTO - Cable controls - 3 point linkage mounted - 1.3m head - Power stew - Flails would benefit with being changed - Some hydraulic pipes perished

As new - 8ft cut - Cut less than 100 acres by a retiring farmer

New PTO guard recently - Spare tips & star joints - 12'' auger - Spare auger included

Tines all present - Tyres holding air - PTO intact - Usable condition

8' roller and frame - Good rings

6'' rollers - C/w PTO shaft and guard - Working order

For quad or compact tractor - Disc - Been dry stored - Control linkage will need freeing off - Will need minor recommissioning as it has been in dry stored for some time - Sold as seen

Unknown of age - Working width is 5m - Transport width is 2.77m - No damage to the frame - All in good working order - Can go straight to work - All rings complete - Loading is provided

SN: 202000612017 - Loading available - 1.35m working width - Has only done approx 3-4 hours work from new

Water filled (currently empty) - Recent new wooden bearings - In frame (8 1/2' wide total) - Only being sold as vendor has bought a lead and following roller - Used this year

Not used for 2 years - Working order - No stand or rear gates - C/w PTO

Been stored indoors - Comes with PTO shaft and control box

Solid frame. - On ring hitch.

Cast bench - PTO driven belt drive

All good bearings - New chains about 20 loads ago - All working

C/w control box - Please note needs re-lining - Used this year and mechanically sound - Only being sold as bought a newer Keenan feeder wagon

Hydraulic - Used recently - Working order but does have slight oil leak on spool valve - 3 point linkage

Spares or Repairs - Slimline 1000 (typed) - Only being sold spares or repairs as it has no NSTS certificate and has small oil leak on the centre ram - Current vendor used it this year & did 500 acres without any issues, so is in working order - 21 metre boom - 1,000 litre tank - C/w control box - C/w PTO

C/w transport trailer - Bought by current vendor 2 years ago but they have never used it, so working condition unknown

11 legs - Tines all good - Shear bolt gone in one leg - Good and strong - Can be loaded

Fitted with 24m spread discs - OM 18-24 discs - Boarder control kit - Lights present

Some weld repairs on linkage framework - Working order - C/w PTO shaft - Hydraulic folding - Solid tub

Working order - Dent at the back but does not effect use - No holes, some surface rust

Has some welds on mouldboards, one cracked - One disc coulter missing

C/W rear gates and PTO shaft (needs new guard) - Would need approx 10 new tines - Some perishing to tyres

Tyres holding air, some perishing - PTO guard intact - All tines present - Both gates present - Working order

Working order - Would benefit with replacement brushes

C/W PTO shaft - Good working order - Adjustable height

Working order - C/W electric motor - 13AMP - 2 flat tyres

Approx 6' long x 18'' round - iron can be removed if not wanted

Approx 5' 6'' long x 18'' round

Spares or Repairs

Mostly complete - Some rust and hole in one mouldboard - Marked: Ransomes Sims & Jefferies

Solid, heavy Cambridge Roller - In working order - Approx 2m in width

C/w PTO shaft - 1 complete, has not been used/moved for many years - 2nd one dismantled with most parts included - Large quantity of spare tines and instruction book.

Galvanised frame - As new - Excellent condition

Serial number unknown - 3m working width - Owned for about 10 years and used for a horse arena , grooming and paddock maintenance - Selling as need a wider machine for larger fields - Manual folding with wheels - Tyres in good condition - All tines present - One tine is slightly bent - Loading available by appointments on evenings or weekends

Spares or repairs - 10' working width - C/w PTO - One rotor has broken away from the frame - Was a strong topper but has suffered from corrosion of some body parts - All mechanicals worked this year - Loading available.

Spares or repairs - Not used for some time - Does not have hose or gun.

Working - One bottom skid is damaged as pictured.

C/w PTO shaft - 6' working width - In good working order - Solid machine - Has been used recently - Needs replacement support strap - Loading available

8' 3'' wide - Good brush - One recent new hydraulic pipe - 3pnt linkage mounted - Jockey wheels - Good condition - Working order

2 x 3 point linkage points - Works well - Surplus requirements

Works well - Has hydraulic ram to move deck across - C/w PTO shaft in good condition - Hydraulic pipes need renewing

Good working order - 3 point linkage - C/w PTO shaft - Cable control box - SN: 3618W - Loading available - Block end housings are broken on all 3 but other than that in good working condition

Spares or repair - 3 point linkage - Is repairable but needs new rubbers, skids and doors - Worn rubbers and worn steel

Disc coulters - All moving parts good and moving freely - Last used 3 years ago and was put away oiled and greased - C/w some spares

Not used for a number of years so will need attention - Believed to be 12m boom - C/w PTO - Up to 1000 litre tank

Twin disc - Not used for many years - C/w homemade wooden hopper extension

Model: 31 - Strong framework - C/w tube for piping.

Working order, however transport linkage needs attention/repair - C/w PTO shaft - 3 rotors - Solid tub - No loading available UNTIL 20th October - Phone calls welcome and viewing by appointment

PTO complete - Working order - Hydraulic shut off - C/w rain cover and extension hopper - Barn stored

Hitch lose but just needs new bolt - Solid framework - All rings appear complete - 2.4m from outside of frame

Vendor has owned for 25 years - Working order just used occasionally for bouting up peat - Nice vintage equipment - To shape and rebuild soil ridges for crops - Row widths can be altered to match varying crop requirements

Approx 4m conveyor belt with motor - Worked when taken out - 3 phase

Has been used on peat processing plant - Suitable for soil - Has a rubber belt - Holds approx 6 cubic meters - In working order - C/W purpose made steps to hopper

Rubber belt - Approx 6 cubic meters - Been used for dosing peat in a peat works but would be suitable for also dosing soil - Does not have a motor

Works but has previously been welded

Owned from new, approx 10 years old - Working order - Barn stored - Tyres holding air - Jack legs - Hydraulics in working order - Used until recently - Crane will detach & fit on 3 point linkage

Bale trailer/Lorry conversion - 22' bed length - Lights present & working - 9t carrying capacity (capable of carrying 14 bales of silage) - Oil brakes & working - C/w front & rear lades - C/w strap tie downs - New floor fitted August 2026 - Tyres in average condition - C/w 2 spare wheels & a spare bale lade

C/w front and back bale lades - Solid metal floor - Brakes and lights work - Used this summer - 12.5 - 15.3 tyres - Recently been painted

Spares or Repairs - SN: 5895 - Lights present but untested - Air brakes are stuck on so believed to have a leak - C/w front lade - C/w strap tie downs - Wooden floor needs new boards & some metal cross members - Tyres hold air but tread is low - Trailer has a strong chassis

Body Craft livestock box with a Merrick Login conversion trailer - S/N: 190310 - Box is 24' and trailer is 25' - Lights present and working - Brakes and handbrake working - C/W cattle partition gate - Tyres in good condition - Roof may need some attention - Has been used every few weeks, up until recently

Tyres holding air - Hydraulic brakes - Very good condition for age

Twin axle - Tyres 385/65 R22.5 - Brakes working - No oil leaks on rams, tips well - Has been used as a muck trailer as floor does have a few holes in it, so cannot be used as a grain trailer

Double axle - Demounted body - Working order - 3point linkage mounted crane - Tyres holding air - Approx 10t capacity - Very strong - Some rust spots on rams

On air, recent new air tanks & bags - 2 stage ramps - Lights need attention - Tyres holding air - Wooden floor - Side strap locker - Year 2008, not plated - Removable bolsters - In recent use - Can be delivered locally at extra cost

Wooden floor (solid) - Tyres holding air (perished) - C/w jack in trailer - C/w spare wheel and tyre - Single ram, tips fine - No lights - Removable sides

C/w with decks - C/w lower and upper partition gates for sheep and partition door for cattle etc - Is the higher one for horses - Has just had brakes fully serviced and working spot on - Had brand new wheel bearings all round - All lights checked and new 7pin plug fitted - Has brand new brake away cable - Good working jockey wheel - Good wheels and tyres all round 2 brand new tyres fitted - All vents present and straight - Roof straight and clean - Good ramp and loading gates - Straight and working side doors - Good honest trailer fully serviced ready to go

Approx 7' x 4' - Manual hydraulic pump - Wooden floor - C/w drop sides (one side is slightly bent) - Lights work

Exact length of box is 20'8 - Sprung drawbar - C/w sheep decks - Twin axle - All tyres holding air with varying tread - Removable container - Some rust in places - Odd small fault in aluminium as pictured - Cattle/sheep partition gate - Wooden tailgates - Solid chequer plate floor - Lights working - Corrosion on tailgate support bars as pictured.

Livestock container is 16' long - Conversion trailer bed is 18' long - Air brakes - C/w sheep decks - Wooden tailgates - Lights present- 1 soft/damaged tyre, other tyres appear to be holding air with tread - Inspection & viewing welcome.

2006 - Gross weight 36t - Triple decks - Electric - Air brakes & suspension - Rear camera & warning lights - Generally good tyres - Ramps to the roof

Spares or repairs - Has been used for moving stock around farm - This is not roadworthy, with no working brakes or lights - Will need to be trailered away

Brakes & lights all work - Some damage to both mudguards - Good condition.

Sound condition - Ring hitch

Year unknown - Lights not present - Brakes are not working - The underside of the metal is a bit rusty but the bed is in good condition - Tyres in good condition - Ram works and tips well

Marshall 6 ton tipping transport trailer - Serial number: 55099 - Carrying capacity of 6 tonnes - Lights present but untested - Brakes untested - Metal floor (solid with no holes) - Folding/removable sides - Tyres in good condition, holding air - Some surface rust to body but is solid - Some perishing to hydraulic tipping pipe

Spares or Repairs - 2.64m trailer length - Drum brakes - C/w front & rear lades - C/w strap tie downs - Wooden floor, intact but old - Suitable for restoration for vintage tractor or as a feature

Carries 3t - Tyres holding air (some perishing) - Useable condition - Bed is 12' long - Telegraph poles not included

Houghton Parkhouse 3 deck 30' livestock trailer - Tri-axle - All lifting - 30' long - Tool box - Side guards - Spring Drawbar - Air suspension - Air brakes - C/w sheep decks (3 bays on each deck) - Chequer plate floor - Scharmuller ball hitch

Approx 6' x 3' x 4' high - No pump - 400 gallon - 1500 ltr

Aluminium decks - 10' fly to roof sheep ramp - Load through tailboard - Sump tank - Trailer not included - Can assist with loading

Single axle trailer - Hydraulics brakes - No decks - Some damage to top corner - Some corrosion

Aluminium folding sheep decks - Trailer not included - Can assist with loading

Single axle - Manual pump - Lights not working - 1 broken mud guard - Ring hitch

C/w sheep decks - Same owner for last 15 years - Commercial brakes - Spring drawbar & axles - New LED rear lights and wiring - Twin/tandem axles - 4 new tyres fitted recently, other tyres varying - C/w 2 partition gates (works for sheep and cattle) - Viewings and enquiries welcome

C/w tailgate - C/w side ramp to load with wheelbarrow - Removable boards to allow the side ramp to be fitted - Ideal dung trailer or similar - Tips fine - No front prop - Tyres holding air - Solid wooden floor

Spares or repair as axles need attention/ replacement - Galvanised removable sides and tailgate - Sides are 2' high - 1 wheel and tyre missing although there is spare wheel and tyre, tyres are reasonably good - Solid wooden floor - Jockey wheel present but damaged - Owner can push onto trailer/load - Lights untested

Twin axle - Sprung drawbar and axles - Hydraulic tailgate - Lights present to rear (untested) - Tyres reasonably good all round - Oil/air brakes - Twin ram tip - Some minor paint flaking/surface rust - Weight rating in photos

Conversion trailer from Beavertail - Totally renewed timber floor - Short drawbar - Solid front headboard - Light board fitted at rear (untested) - Tyres all have tread, some perishing on walls - Oil brakes (pipe perishing)

Tyres holding air - Mesh floor - Contents of trailer not included

GET126 - Twin axle - 1 owner from new - Brakes and lights working - C/W sheep decks and 2 partition gates - Wind-up decks - C/W spare wheel and tyre - Tyres holding air with tread - Been in regular use, sale due to upgrade to new trailer with power deck

Shoot trailer - Rear door is still available (not pictured) and can be put back on to make it back to a livestock trailer - C/w internal scales - Chequer plate floor - Brakes and lights work and recently refurbished (hardly used since)