Some weld repairs on linkage framework - Working order - C/w PTO shaft - Hydraulic folding - Solid tub

Working order - Dent at the back but does not effect use - No holes, some surface rust

Has some welds on mouldboards, one cracked - One disc coulter missing

C/W rear gates and PTO shaft (needs new guard) - Would need approx 10 new tines - Some perishing to tyres

Tyres holding air, some perishing - PTO guard intact - All tines present - Both gates present - Working order

Working order - Would benefit with replacement brushes

C/W PTO shaft - Good working order - Adjustable height

Working order - C/W electric motor - 13AMP - 2 flat tyres

Approx 6' long x 18'' round - iron can be removed if not wanted

Approx 5' 6'' long x 18'' round

Spares or Repairs

Mostly complete - Some rust and hole in one mouldboard - Marked: Ransomes Sims & Jefferies

Solid, heavy Cambridge Roller - In working order - Approx 2m in width

C/w PTO shaft - 1 complete, has not been used/moved for many years - 2nd one dismantled with most parts included - Large quantity of spare tines and instruction book.

Galvanised frame - As new - Excellent condition

Spares or repairs - 10' working width - C/w PTO - One rotor has broken away from the frame - Was a strong topper but has suffered from corrosion of some body parts - All mechanicals worked this year - Loading available.

Spares or repairs - Not used for some time - Does not have hose or gun.

Working - One bottom skid is damaged as pictured.

C/w PTO shaft - 6' working width - In good working order - Solid machine - Has been used recently - Needs replacement support strap - Loading available

8' 3'' wide - Good brush - One recent new hydraulic pipe - 3pnt linkage mounted - Jockey wheels - Good condition - Working order

Works well - Has hydraulic ram to move deck across - C/w PTO shaft in good condition - Hydraulic pipes need renewing

Good working order - 3 point linkage - C/w PTO shaft - Cable control box - SN: 3618W - Loading available - Block end housings are broken on all 3 but other than that in good working condition

Spares or repair - 3 point linkage - Is repairable but needs new rubbers, skids and doors - Worn rubbers and worn steel

Disc coulters - All moving parts good and moving freely - Last used 3 years ago and was put away oiled and greased - C/w some spares

Not used for a number of years so will need attention - Believed to be 12m boom - C/w PTO - Up to 1000 litre tank

Twin disc - Not used for many years - C/w homemade wooden hopper extension

Model: 31 - Strong framework - C/w tube for piping.

Working order, however transport linkage needs attention/repair - C/w PTO shaft - 3 rotors - Solid tub - No loading available UNTIL 20th October - Phone calls welcome and viewing by appointment

PTO complete - Working order - Hydraulic shut off - C/w rain cover and extension hopper - Barn stored

Vendor has owned for 25 years - Working order just used occasionally for bouting up peat - Nice vintage equipment - To shape and rebuild soil ridges for crops - Row widths can be altered to match varying crop requirements

Approx 4m conveyor belt with motor - Worked when taken out - 3 phase

Has been used on peat processing plant - Suitable for soil - Has a rubber belt - Holds approx 6 cubic meters - In working order - C/W purpose made steps to hopper

Rubber belt - Approx 6 cubic meters - Been used for dosing peat in a peat works but would be suitable for also dosing soil - Does not have a motor

Owned from new, approx 10 years old - Working order - Barn stored - Tyres holding air - Jack legs - Hydraulics in working order - Used until recently - Crane will detach & fit on 3 point linkage

Bale trailer/Lorry conversion - 22' bed length - Lights present & working - 9t carrying capacity (capable of carrying 14 bales of silage) - Oil brakes & working - C/w front & rear lades - C/w strap tie downs - New floor fitted August 2026 - Tyres in average condition - C/w 2 spare wheels & a spare bale lade

C/w front and back bale lades - Solid metal floor - Brakes and lights work - Used this summer - 12.5 - 15.3 tyres - Recently been painted

Spares or Repairs - SN: 5895 - Lights present but untested - Air brakes are stuck on so believed to have a leak - C/w front lade - C/w strap tie downs - Wooden floor needs new boards & some metal cross members - Tyres hold air but tread is low - Trailer has a strong chassis

Tyres holding air - Hydraulic brakes - Very good condition for age

Twin axle - Tyres 385/65 R22.5 - Brakes working - No oil leaks on rams, tips well - Has been used as a muck trailer as floor does have a few holes in it, so cannot be used as a grain trailer

Double axle - Demounted body - Working order - 3point linkage mounted crane - Tyres holding air - Approx 10t capacity - Very strong - Some rust spots on rams

On air, recent new air tanks & bags - 2 stage ramps - Lights need attention - Tyres holding air - Wooden floor - Side strap locker - Year 2008, not plated - Removable bolsters - In recent use - Can be delivered locally at extra cost

Wooden floor (solid) - Tyres holding air (perished) - C/w jack in trailer - C/w spare wheel and tyre - Single ram, tips fine - No lights - Removable sides

C/w with decks - C/w lower and upper partition gates for sheep and partition door for cattle etc - Is the higher one for horses - Has just had brakes fully serviced and working spot on - Had brand new wheel bearings all round - All lights checked and new 7pin plug fitted - Has brand new brake away cable - Good working jockey wheel - Good wheels and tyres all round 2 brand new tyres fitted - All vents present and straight - Roof straight and clean - Good ramp and loading gates - Straight and working side doors - Good honest trailer fully serviced ready to go

Approx 7' x 4' - Manual hydraulic pump - Wooden floor - C/w drop sides (one side is slightly bent) - Lights work

Exact length of box is 20'8 - Sprung drawbar - C/w sheep decks - Twin axle - All tyres holding air with varying tread - Removable container - Some rust in places - Odd small fault in aluminium as pictured - Cattle/sheep partition gate - Wooden tailgates - Solid chequer plate floor - Lights working - Corrosion on tailgate support bars as pictured.

Livestock container is 16' long - Conversion trailer bed is 18' long - Air brakes - C/w sheep decks - Wooden tailgates - Lights present- 1 soft/damaged tyre, other tyres appear to be holding air with tread - Inspection & viewing welcome.

2006 - Gross weight 36t - Triple decks - Electric - Air brakes & suspension - Rear camera & warning lights - Generally good tyres - Ramps to the roof

Spares or repairs - Has been used for moving stock around farm - This is not roadworthy, with no working brakes or lights - Will need to be trailered away

Brakes & lights all work - Some damage to both mudguards - Good condition.

Sound condition - Ring hitch

Year unknown - Lights not present - Brakes are not working - The underside of the metal is a bit rusty but the bed is in good condition - Tyres in good condition - Ram works and tips well

Marshall 6 ton tipping transport trailer - Serial number: 55099 - Carrying capacity of 6 tonnes - Lights present but untested - Brakes untested - Metal floor (solid with no holes) - Folding/removable sides - Tyres in good condition, holding air - Some surface rust to body but is solid - Some perishing to hydraulic tipping pipe

Spares or Repairs - 2.64m trailer length - Drum brakes - C/w front & rear lades - C/w strap tie downs - Wooden floor, intact but old - Suitable for restoration for vintage tractor or as a feature

Houghton Parkhouse 3 deck 30' livestock trailer - Tri-axle - All lifting - 30' long - Tool box - Side guards - Spring Drawbar - Air suspension - Air brakes - C/w sheep decks (3 bays on each deck) - Chequer plate floor - Scharmuller ball hitch

Approx 6' x 3' x 4' high - No pump - 400 gallon - 1500 ltr

Aluminium decks - 10' fly to roof sheep ramp - Load through tailboard - Sump tank - Trailer not included - Can assist with loading

Single axle trailer - Hydraulics brakes - No decks - Some damage to top corner - Some corrosion

Aluminium folding sheep decks - Trailer not included - Can assist with loading

Single axle - Manual pump - Lights not working - 1 broken mud guard - Ring hitch

C/w sheep decks - Same owner for last 15 years - Commercial brakes - Spring drawbar & axles - New LED rear lights and wiring - Twin/tandem axles - 4 new tyres fitted recently, other tyres varying - C/w 2 partition gates (works for sheep and cattle) - Viewings and enquiries welcome

C/w tailgate - C/w side ramp to load with wheelbarrow - Removable boards to allow the side ramp to be fitted - Ideal dung trailer or similar - Tips fine - No front prop - Tyres holding air - Solid wooden floor

Twin axle - Sprung drawbar and axles - Hydraulic tailgate - Lights present to rear (untested) - Tyres reasonably good all round - Oil/air brakes - Twin ram tip - Some minor paint flaking/surface rust - Weight rating in photos

Tyres holding air - Mesh floor - Contents of trailer not included

GET126 - Twin axle - 1 owner from new - Brakes and lights working - C/W sheep decks and 2 partition gates - Wind-up decks - C/W spare wheel and tyre - Tyres holding air with tread - Been in regular use, sale due to upgrade to new trailer with power deck

Shoot trailer - Rear door is still available (not pictured) and can be put back on to make it back to a livestock trailer - C/w internal scales - Chequer plate floor - Brakes and lights work and recently refurbished (hardly used since)

One tyre flat - Lights and brakes untested - Cage sides - Body is 14' long x 5'6'' wide - Aluminium floor and ramp - Rear jacks - Has been used to move sheep around

14' - Flatbed - Owned from new - Tyres good & holding air - C/w spare wheel, never been used - Brakes & lights in working order (needs one new front light) - Photographed with extension back & lade & ramps which ARE NOT INCLUDED in the sale - Original headboard will be fitted.

Removed from mitsubishi canter - Very good condition - Little use - 10' 6'' long x 6' 10'' wide - Drop sides & tailgate - Hydraulic ram present (some rust spots)

20' x 8' wide - Twin axle - One stub slightly bent - Hardwood floor - Brakes & lights untested - 3 flat tyres - Contents not included

Lights and brakes present but untested - Tyres perished but holding air - Handbrake working - Serial No. 24636 - Assistance with loading available if required.

1080mm long, 830mm wide

2055mm x 1120mm - Needs a new tyre

With Botex 360 Loader - 12' long - 10T carrying capacity - Lights present and working - Brakes working - Tyres in good condition - No leaks and all working - Being sold as no longer needed

C/w spare wheel and tyre (tyre very good) - No decks - C/w cattle partition - Purchased new in 2024, manufactured 2023 - C/w chequer plate mud guards - 14' tri-axle trailer - LED rear lights present and working - Open front ventilation - All tyres with reasonably good tread - Brakes working - Very tidy trailer

C/W spare wheel and tyre (unused) - Approx 2 years old - 1 owner from new, sale due to new quad bike not fitting - C/W front prop - 2 good tyres - Rhino board floor - Lights present and working

Made by Premier Luxury Loos - Lights and brakes present - Tyres holding air with good tread - Rhino board floor - Twin sprung axle - Lades (front, rear and centre) - Some rust on chassis

Lights present but not working - All metal with removable internal partitions - Tyres in good condition - Solid old style Rappa trailer

6' long x 4' wide - Lights and brakes working - Tyres good - Holding air - Roller shutter door - Dry inside - Jacks present

Spares or repairs - 45'' x 89'' internal size - Brakes not tested - No lights fitted - Was made to carry an ATV

Starts, runs and works - Tyres holding air - Ex National Grid - 15 KVA - Silent run - 4 cylinder Lister diesel engine - Missing exhaust - 16 x 32 amp sockets - Jacks present - Lights and brakes present - untested

Single axle - Unbraked - C/w cover - Good tyres and lights

Bed length 8' - SN: SCK60000060481127 - Lights present & working - Brakes working - C/w jockey wheel - C/w spare wheel - New floor - Tyres in good condition - Hand brake handle broke but brakes are not locked on

Bed length 8' - Lights present & working - Handbrake & brakes working - C/w jockey wheel - C/w spare wheel - Like new floor - Tyres in good condition

C/w spare wheel - Tipper all works - Lights, etc - In good condition

New roof and renovation needed

Fully lined - Some holes - Been used as office - Fitted with toilet - Can assist with loading

1' wider than a normal container - Fitted to food standards - New corrugated roof 2 years ago as it was deteriorating - Does not include any of the items within the container in the picture just the container itself

Made of insulated sheets and finished up to food hygiene standards - Due to it being attached to another building, once dismantled and removed it would have one side that would be open - Buyer to dismantle but help can be provided - None of the items within the building are included

Approx measurements - Used as site hut but no longer needed - Solid and water tight - Window shutters, electrics with one striplight and sockets which work a bit but not PAT tested - No key for the door but can be locked with a padlock (not provided) - Can load but no artic access - Will be empty before collection

Single use - can assist with loading

Dismantled ready for collection - Was working and in use until a couple of years ago however not tested or used recently - C/w motor - Measurements unknown but 95'' High

Insulated - Hot & cold running water - Lights, etc - Built this year as new - Can help with loading - Can help with delivery at extra cost

Unfinished project - No doors or windows - Douglas fir timbers - Dovetailed joints - Each side is 5m long - Footprint 64m2 (approx) - Very substantial project - Viewing recommended - Could be delivered/finished at extra cost

Serial Number: SGES000EXFAVA0081 - Lights present and working - C/w spare tyre, handbrake, jockey wheel, working toilet, working oven - 4 Berth - Good tyre tread - Excellent condition with adaptable family layout (can make 4 single beds or 2 double beds)

Ideal for glamping, home office or garden room - Substantial metal chassis complete with cast iron wheels - Insulated floor, walls and ceiling - UPVC doors and windows, glazing not fitted for ease of transport - Sockets and lights installed - External measurements: 4946mm x 2300mm - Internal measurements: 4735mm x 2086mm - Min height: 2041mm - Max height: 2264mm - Viewings welcome - Buyer to arrange collection - NO loading available

Beautiful handmade shepherds hut - Just finished and ready to use - 2.59m wide - 3m long - On new chassis with turntable

Shower with a gas hot tap boiler & a gas bottle just attach to a water pipe and use - Used once

4'2'' wide - Chiltern brackets - Good condition - Used recently - All tines and cutters present

Came off a 2000 hour machine - C/w locking pin & ram.

Very tidy - Tines all present - Has had another set of brackets welded on