Working order - Brakes and lights working - Tips well - Grain shute - Removable back door - Tight rocking beams - A few small holes here and there - Nothing major - Nice little trailer

Twin axle - lights present but untested - handbrake working - c/w ramps - C/w manual winch - c/w jockey wheel - for sale due to retirement

Built by Whites Trailers Ltd - C/W board and alloy floor - Drop and removable sides - Stored heavy duty car ramps - Rear prop stands - Twin axle on 13'' wheels - 3500T load rated - C/W spare wheel - Led lights and markers

5T carrying capacity - Trailer length 15' - Trailer bed 15' - Lights present (untested) - Brakes untested - Hydraulic brakes - C/w strap tie downs - No load sensing brakes - No sprung drawbar - No bale wedge - Loading ramp is hydraulic - Steel chequer plate floor - Tyres are good but have some cracking

Removable sides & tailgate - C/w spare wheel & tyre - C/w 3 tyres with good tread and 1 tyre worn - No ramps - LED lights to rear

Approx 10' long

6' 6'' Wide - 3.5T Capacity - lights present & working - c/w spare wheel - 4 new heavy duty tyres - new 18mm phenolic trailer floorboards (resin coated buffalo type boarding) - C/w drop down sides - owned from new - tows well

Lights present but need attention - 50% tread on tyres

Spares or Repairs - Lights present but untested - Brakes untested - Sprung drawbar - In need of restoration

Spares or repairs - No brakes or lights - Chequer plate average but solid - Tyres are flat - Untowable - Rusty - Chassis broken - Loading available

Spares or repair - Used - Needs TLC - All lots selling due to reduction and having to relocate genuine dispersal

Tri axle - SN: GM900712NSD324DB - 24000 gross carrying capacity - 20'/ 6.08m bed length - Lights present & working - Brakes & Hand brake working - Hardwood floor, mostly solid. Few boards need replacing due to damage when loading blocks - All tyres good and holding air. Tread depth of 13, 10, 9, 8, 5 and 6mm - Some damage to rear left hand corner where bed meets back upright. Easy fix and could be used for agricultural use in current form. Would need to be repaired prior to getting an MOT test - Tidy trailer with solid chassis and just a small amount of surface corrosion in places. - 385 super singles - All Mercedes axles with air brakes, which are very efficient- - Air suspension, with lifting front axle - Unable to test ABS as no suitable vehicle to plug into. - 57mm coupling, but could be unbolted and changed by buyer if required - Viewing welcome before the auction ends

Ride on lawn mower or garden tractor dump trailer - Puncture proof tyres - Full steel construction - 1.6mm steel body - Ideal for logs, wood chip etc - 120cm long - 84cm wide - 30cm high - Approx 200 litre capacity - Marked 3

Dropsides - Perfect for ride on mower, small ATV etc - Steel chassis and frame - Phenolic plywood floor and sides - Ideal for logs wood chip, feed materials, hay etc - 30'' wide - 60'' long - 83'' total - 8'' sides - Removable side to use as flatbed - Marked 4

Serial No: SCKD00000K5160759 - 10' x 5' x 5'' - Dropsides - Ladder rack - Just been fully serviced - All tyres have good tread - Internal load lashing points - All lights work - Brakes in good condition - Spare wheel - Ramp slots

Twin braked axle - Timber floor - Full rear ramp - Ball hitch with keys - 10' x 5' 4'' - Tyres in good condition - Done little work - One side light popped off

Unbraked - Lights present but untested - Tyres holding air - Spare wheel - Floor showing signs of age - Slight damage to plastic mudguard - Please note this lot is part of a genuine dispersal on behalf of a deceased estate. There will be a collection day held on Friday 3rd July between 9:00am to 5:00pm. There is a viewing day on Friday 26th June, between 9:00am to 5:00pm, the sale address is Exeland Farm, Bickleigh, Tiverton, EX16 8RA.

Size: 11' long X 7' wide - C/w drop sides - Chequer plate floor - C/w spare wheel - All electrics work - Photos where taken in 2023, however trailer remains in similar condition

10 x 5 height at front 4.25 - Height at back 3.10 metres

3m wide with front door and 243cm deep x 243cm high - C/w frost protection heater, internal light (electric hook up) and internal shelving - Door locks with key - Container is bunded but does have some rust holes at back - Vendor will assist loading - Please note contents of container are not included

Sits on concrete slab which is not inlcuded - Buyer to dismantle and remove - C/w all electrics (will be disconnected prior to collection) - Currently in use and can be seen working. - This item will need to be collected after Monday 13th July

Open plan refurbed in green - Anti vandal doors and window shutters - Haulage can be provided (if so please contact for a delivery quote)

Refurbed in green - One side has 3 urinals, 3 toilets and a double sink - One side has a single toilet and sink - Haulage can be provided (if so please contact for delivery quote)

Cream - Currently used as store but contents will be removed - One corner in roof has slight hole that can easily be rectified - Haulage can be provided (if so please contact for delivery quote)

External dimension: 20' long x 8' wide x 8'6'' high - Made from Corten (weathering) steel - Marine-grade plywood - Double cargo doors at one end with locking bars and weather tight rubber seals - Wind and water tight - Anti condensation treatment can be applied for an additional cost - Haulage can be provided (if so please contact for delivery quote)

External dimensions: 20' long x 8' wide x 8'6'' high - Cargo doors located at one end with secure locking bars - Marine grade plywood flooring - Wind and water tight - Anti condensation can be applied for an additional cost - Haulage can be provided (if so please contact for delivery quote)

Single use - can assist with loading

Lifting points on top of yellow legs used when installing 4 years ago - 1 corner of roof showing damage and signs of moisture internally but likely repairable - lorry access but not articulated, requires hiab or similar to load - contents not included - felt roof - some repairs/ re-enforcing

Has had an extension put on but not finished - New roof, new wood, old log burner, kitchen heater and stable door - Buyer to dismantle and remove - Viewings welcome

32' Long X 10' Wide - Galvanised Chassis - Tyres holding air - Barn stored - moved outside for Photographs - C/w all guttering and drainage pipes - Double glazed - Original beds in storage, comes with full size double bed, 2 single beds & fold out bed - Full size oven and hob & electric fridge - bathroom c/w shower - gas fire and boiler - sofas have new upholstery - good & tidy - assistance with loading available

Beautiful handmade shepherds hut - Just finished and ready to use - 2.59m wide - 3m long - On new chassis with turntable

Euro brackets

Removed from 2018 - 2000hr machine - All complete - Bushes good

Solid floor and sides - 3 point linkage - No mechanical loading - C/w tailgate

Make unknown - Euro hooks

C/W McConnel loader brackets - Been stored inside - Hydraulic pipes perished

Requires 4 new tines ideally - Been used recently - Straight and true - C/w side tines

Been removed by gas - Straight

John Deere brackets - Rusty

Holds 56 conventional bales - Tyres holding air - Hydraulic pipes have some perishing - Working when last used

As new condition - Very little work - On Tanco loader brackets

Longest spike 3' - Very little use - On Tanco loader brackets

C/w hangers and catch - Some rot on top bar

Removable mesh front - Good solid floor

Euro 8 brackets

J Silk attachments - JCB quick fit - Bought new in 2023 and barely used by vendor - Straight

Pin & Cone Brackets - can be used for big or small bales - all tines present - in working order

New condition - Skidsteer brackets

Spares or repairs - Approx 2020 - cat 2 pin size - Needs a new motor and re-assembly

Requires one new tyre - Not used for many years - Appears complete.

Strong framework - Strong spikes

Believed Manitou brackets - Strong, solid bucket with good wearing edge - Purchased with the intention of altering brackets but never did -

C/w pipes (perished) - Chilton brackets - Works but 1 tine slightly off-centre/bent so bearings wear out - Could be repaired or potentially used for small quantity - Vendor happy to load

Spares and repairs - 1 tine missing - Needs some TLC - Two hydraulic pipes missing - Merlo brackets

Removed from David Brown 996 - Was in working order when removed - Rams have some rust spots

4'2'' wide - Adjustable brackets - All tines present and straight - Some rust on frame

Removed with angle grinder

Marked 26 - 1m long - This lot is part of an ongoing dispersal sale - A viewing day will be held on Friday 26th June between 9am and 12.30pm - A collection day, where lots should be collected, will be held on Friday 3rd July between 10am and 4pm - Alternative collection is possible by appointment if required, but all lots MUST be collected within 2 weeks

Working order - Euro 8 headstock

Works, opens and shuts - All tines present at bottom - 5 tines missing along front

Spares or repairs - Fitted on a frame with Merlo brackets - Good ram and blade - Some frame rust - Needs a new hydraulic connector

Age unknown - Pin and cone - No known faults - Ram seals have recently been done - New oil pipes

Euro bracket - Length of forks 1.2m

Age unknown - 3 point linkage - No faults - Will go straight to work - Ram and pipes are in good condition - Could do with a few new tines

Not used for many years - 3 point linkage mounted - Bend on frame

All tines present - Good strong grab opens and closes - No rust holes - Pipes have some perishing but hold pressure - One ram has slight leak

Euro 8 brackets - In good working order - Solid straight and strong

JC tool carrier brackets - Good rams and pipes - All tines present and solid - Has had repair to top beam (as pictured)

In good working order - Good hydraulic pipes - Very well made and strong - Ready to go straight to work

On merlo brackets - Good solid strong grab - Will pick up big bales a well - In good working order - All spikes present and straight

Quicke No 3 brackets - Good solid muck fork - All tines present

Spares or repairs - Needs new belt - Motor runs fine - Bottom metal work needs some attention (shown in the photos)

7' width

1.2m long

90cm lengths of forks - Selling due to being too heavy for compact tractor

Spares or repairs - Missing hydraulic ram - 3pt linkage

C/w believed Euro 8 Brackets - Used last year - Working order

One end angled to 1.47m

3 point linkage mounted - Latch needs attention

Yard master - Galvanised - Adjustable wings - Latch and turnover working - Some life left in rubber - 3 point linkage or A frame mounted

Surplus to requirement

Surplus to requirements - old but still works - pin & cone brackets - hydraulic pipes perished

Surplus to requirements - old but still works - pin & cone brackets - hydraulic pipes perished

2.2M working width - Cat 1 linkage - Light external corrosion - New aged stock

Headstock adapter - New/aged stock - 2023

LA402 or LA545 loader - Good order - Pinned type - Little use

SMS/Trima brackets - Hydraulic width adjustable - Some photos represent a new set of pallet forks but the photo of the lot has the pallet forks below

3 point linkage brackets - No hydraulic pipes - Ram appears in good condition

40MM Pins - 7'' pin centres - 5.25'' inside the headstock

40MM Pins - 7'' pin centres - 5.25'' inside the headstock

Header refurbished Header refurbished - Combine is lotted separately at lot 131

60MM pins

Has had a repair to frame