Hangers and latch present - Straight and strong - Top rail has corrosion

Hinges, staples, ground bolts

Gate is bowed but useable to do a job

C/w hangers and latch

Slightly bent - Latch and one hanger present

6' x 4' - Latch and 1 hinge present - Some rust - C/w rusty 6' hurdle - C/w Debudding clamp

Good and strong - Top rail bent on both - 1 x 15' long - 1 x 14' long - One hanger missing on each - Latches present

Marked 106 - Odd very minor fault, otherwise good - This lot is part of an ongoing dispersal sale - A viewing day will be held on Friday 26th June between 9am and 12.30pm - A collection day, where lots should be collected, will be held on Friday 3rd July between 10am and 4pm - Alternative collection is possible by appointment if required, but all lots MUST be collected within 2 weeks

Marked 107 - All with faults/damage - 2 x 9' long - 2 x 14' long - Would fill a gap - This lot is part of an ongoing dispersal sale - A viewing day will be held on Friday 26th June between 9am and 12.30pm - A collection day, where lots should be collected, will be held on Friday 3rd July between 10am and 4pm - Alternative collection is possible by appointment if required, but all lots MUST be collected within 2 weeks

Marked 108 - Heavy duty - Galvanised - Only small fault on bottom hanger as pictured - This lot is part of an ongoing dispersal sale - A viewing day will be held on Friday 26th June between 9am and 12.30pm - A collection day, where lots should be collected, will be held on Friday 3rd July between 10am and 4pm - Alternative collection is possible by appointment if required, but all lots MUST be collected within 2 weeks

Marked 109 - Straight and strong and correct - C/w latch and hangers - This lot is part of an ongoing dispersal sale - A viewing day will be held on Friday 26th June between 9am and 12.30pm - A collection day, where lots should be collected, will be held on Friday 3rd July between 10am and 4pm - Alternative collection is possible by appointment if required, but all lots MUST be collected within 2 weeks

Marked 110 - This lot is part of an ongoing dispersal sale - A viewing day will be held on Friday 26th June between 9am and 12.30pm - A collection day, where lots should be collected, will be held on Friday 3rd July between 10am and 4pm - Alternative collection is possible by appointment if required, but all lots MUST be collected within 2 weeks

Marked 111 - Straight, strong and correct - C/w hangers and latch - 1 very minor dent on lowest bar - This lot is part of an ongoing dispersal sale - A viewing day will be held on Friday 26th June between 9am and 12.30pm - A collection day, where lots should be collected, will be held on Friday 3rd July between 10am and 4pm - Alternative collection is possible by appointment if required, but all lots MUST be collected within 2 weeks

Approx 7' long x 14'' wide at one end & 11'' at the other -

Approx 102 x 44 x 3200mm

C/w hangers and latch - Tin in good condition - Straight and strong - Heavy duty

Timber needs attention - Straight and strong - C/w hangers

C/w hangers and latch - Straight and strong

C/w hangers and latch - Top bar bent but still useable

C/w hangings

C/w hangings

C/w hangings

C/w hangings

C/w hangings

C/w hangings

C/w hangings

C/w hangings - 1 Bar lightly bent

C/w 1 hanging - Good condition

C/w 1 hanging - Good condition

C/w hangings - Good condition

7 bar gate - Good condition

5 bar gate - Good condition

6 bar gate - Slightly bent but otherwise a solid gate

4 x 15'/3' feed barriers - 1 x 8'/3' feed barrier - Heavy and made well - 50mm box - Bought 10 at a recent auction for a project but these are surplus

4 plain & 4 with trough holder - 2 with holder missing equals 10 panels - All lots selling due to reduction and having to relocate genuine dispersal

Sheeted with perforated tin - C/w hangers and latch - Believed straight

Perforated tin sheeting - C/w hangers and latch - Believed straight - Some rust holes to box frame

C/w hangings and latch - 12' x 6' high - C/w lifting brackets - Slight rust on bottom

C/w hangings and latch - 12' x 6' high - C/w lifting brackets - Slight rust on bottom

Needs new timber - Slightly bent

Marked 77 - This lot is part of an ongoing dispersal sale - A viewing day will be held on Friday 26th June between 9am and 12.30pm - A collection day, where lots should be collected, will be held on Friday 3rd July between 10am and 4pm - Alternative collection is possible by appointment if required, but all lots MUST be collected within 2 weeks

1.15m high - Galvanised tin, strong box frame - Some corrosion on tin - Very heavy/well made - C/w hangers

4'' x 4'' x 6' 6'' long - 2 hangers

Bottom needs repair or cutting off - Slightly bent

1.15m high - Galvanised tin, strong box frame - Some corrosion on tin - Very heavy/well made - C/w hangers

4'' x 4'' x 6' 6'' long - Double hangers

1.15m high - Galvanised tin, strong box frame - Some corrosion on tin - Very heavy/well made - C/w hangers

4'' x 4'' x 6' 6'' long - Double hangers

1 x 1.7m long approx 1 x 0.85m long approx 1 x 2.45m long approx - 2 with drop-down latches - All have hangers - Some surface rust but mostly solid - Longest one has corrosion on corner but has been re-enforced as pictured

2.7m long x 0.95cm high - All solid and strong, 1 has some corrosion near hanger as pictured - Heavy and well made - C/w hangers

1.15m high - Galvanised tin, strong box frame - Some corrosion on tin - Very heavy/well made - C/w hangers

One hanging - No latch - Straight and true

Hangings and latch present - Straight and true

Spares or repairs - Hangings and latch present - Bent and broken

Hangings and latch present - Strong and straight

Spares or repairs - Bent - Hangings and latch present

10' wide x 5' high - Missing one hanger - Latch present - Good and strong

One hanger present - No latch - Throwover - Slight kink on top rail

No latch - Hangers present - Slight bend

Bent and broken - 1 hanger missing

No hangers - Latch present - Straight and true

C/w hangers - No latch - Slightly bent

C/w hangers - No latch - Straight and true

Bent - No latches or hangings

All with kinks - One with missing latch

C/w latch and hangers - Top rail bent

Currently extended to 3.6, 2.6M at shortest - Very heavy duty - Latches missing

Currently extended to 3.6, 2.6M at shortest - Very heavy duty - Hangings both end

Currently extended to 3.6, 2.6M at shortest - Very heavy duty - Hangings both end

Currently extended to 3.6, 2.6M at shortest - Very heavy duty - One latch missing

Currently extended to 3.6, 2.6M at shortest - Very heavy duty - Hangings both end

Currently extended to 3.6, 2.6M at shortest - Very heavy duty - Hangings both ends

Currently extended to 3.6, 2.6M at shortest - Very heavy duty - Hangings both ends

Currently extended to 3.6, 2.6M at shortest - Very heavy duty - Hangings both ends

Currently extended to 3.6, 2.6M at shortest - Very heavy duty - One latch missing

One is 8' wide x 8' high - One is 6' wide x 8' high - Rusty - Overall condition poor - Please note this lot is part of a genuine dispersal on behalf of a deceased estate. There will be a collection day held on Friday 3rd July between 9:00am to 5:00pm. There is a viewing day on Friday 26th June, between 9:00am to 5:00pm, the sale address is Exeland Farm, Bickleigh, Tiverton, EX16 8RA.

All used - Marked as 18 - Please note this lot is part of an ongoing dispersal with the vendor having relinquished the farm tenancy

Total width 7' 2'' but to fit door size 6' 8'' high - Height is 3' 1'' - C/w latch in top right corner - Marked as 11 - Please note this lot is part of an ongoing dispersal with the vendor having relinquished the farm tenancy

Approx 220CM x 185CM high - C/w hangers - Tin sheet has one hole and showing rust - Offset hanging brackets - Marked as 33 - Please note this lot is part of an ongoing dispersal with the vendor having relinquished the farm tenancy

Approx 29CM x 122CM (4') high - C/w latch and hangers - Tin sheet is very rusted at top, and has holes - Marked as 34 - Please note this lot is part of an ongoing dispersal with the vendor having relinquished the farm tenancy

4' 3'' wide - Approx 22'' high - Wooden dung board sides are 2'' thick - It is 20' trough with a 5' add on trough - Marked as 63 - Please note this lot is part of an ongoing dispersal with the vendor having relinquished the farm tenancy

Approx 20' 6'' - 4' 3'' wide - Approx 22'' high - Wooden dung board sides are 2'' thick - Marked as 62 - Please note this lot is part of an ongoing dispersal with the vendor having relinquished the farm tenancy

Approx 20' 6'' - 4' 3'' wide - Approx 22'' high - Wooden dung board sides are 2'' thick - Marked as 61 - Please note this lot is part of an ongoing dispersal with the vendor having relinquished the farm tenancy

Approx 20' 6'' - 4' 3'' wide - Approx 22'' high - Wooden dung board sides are 2'' thick - Marked as 60 - Please note this lot is part of an ongoing dispersal with the vendor having relinquished the farm tenancy

4' 3'' wide - Approx 22'' high - Wooden dung board sides are 2'' thick - Marked as 59 - Please note this lot is part of an ongoing dispersal with the vendor having relinquished the farm tenancy

Sheeted with 10CM wooden boards - Gate is straight and 7 bars - C/w hangers - No latch - Board is damaged on the bottom - Marked as 43 - Please note this lot is part of an ongoing dispersal with the vendor having relinquished the farm tenancy

Sheeted with 10CM wooden boards - Gate is straight and 7 bars - C/w hangers - No latch but does have chain - Marked as 42 - Please note this lot is part of an ongoing dispersal with the vendor having relinquished the farm tenancy

1 RSJ with hangers 18'' apart - 1 galvanised with hangers 3' apart and facing opposite directions - 1 galvanised tube with hangers 3' apart - Please note this lot is part of an ongoing dispersal with the vendor having relinquished the farm tenancy

14' long x 8' high - This lot is part of an ongoing dispersal sale - A viewing day will be held on Friday 26th June between 9am and 12.30pm - A collection day, where lots should be collected, will be held on Friday 3rd July between 10am and 4pm - Alternative collection is possible by appointment if required, but all lots MUST be collected within 2 weeks

2 are 5' 9'' Long - 1 is 5' 5'' - Some Slight Marks - 1 Slightly Bent

To inc: Monkey strainers and bars - Post lifter

Approx 5'' x 3'' and 7'-8' long

X-Fence 13-125-7.5 high tensile fencing wire - Approx 20m used of a 50m roll

Pig tail

Pig tail

Approx 1820mm -

Approx 1805mm long and 890mm tall