DEUTZ-FAHR SWATMASTER 4221 SINGLE ROTOR RAKE - C/w PTO shaft - All arms present - All tyres holding air some perishing on walls - C/w manuals & 2 spare tines - Dry stored when not in use - Used last season - Skirt is tatty but useable.

2010 DAL-BO COMPACT 630 CAMBRIDGE ROLLERS - Hydraulic folding - 6.3m wide - Good tyres with tread - Dry stored until recent weeks - Front prop - C/w manual.

Marked 124 - BTB30 disc cultivator - 2 sets of 11 discs (approx 21.5'' diameter) - C/w trailing ring roller - Never used - Part of the Awemak heavy duty range - MSK bearings on discs - Wearing part Italian made but available from Kramp, Spaldings and others - This lot is part of an ongoing dispersal sale - A viewing day will be held on Friday 26th June between 9am and 12.30pm - A collection day, where lots should be collected, will be held on Friday 3rd July between 10am and 4pm - Alternative collection is possible by appointment if required, but all lots MUST be collected within 2 weeks

Complete with transport kit - 2.2m drill width - 300 ltr hopper - Has 1 spare press wheel - Great for drilling cover crops and overseeding existing lays - Serial No: 3-048 - Loading available onto trailer or similar

991LBER - Serial No: 4-101241 - 15,162 bale count - C/w control box - 750mm wrap size - Needs a good service - Not been used for a couple years due to contractors getting a fushion baler - Was working when last used and owned from new - Slight corrosion on the wrap arm and needs a new knife blade for cutting wrap

17 knives - 44,000 bale count - 1 owner from new - Good tyres - SN: 1745.54.269 - 4' bale size - C/w control box - C/w PTO shaft

SN: 63101480 - C/w PTO shaft - Approx 13.2m working width - Loading available

Tidy mower - Owned for the last 11 years and has been faultless - Had new blades last season - Always maintained and going through the workshop before the auction ends - Selling due to upgraded to a newer mower

Working order - Headland tilt - All tines present and correct - Smart machine - Usual age related marks

Working order - Tidy machine - Believed to be 2012

In good working order - Plenty of wear still left on sliters - Good bearings - Good strong solid frame - Ready to go straight to work

Good working order - Cambridge rings with breaker rings as well - Unfold and fold up fine - Good wheels and tyres both holding air - Good strong solid frame - Good bearings - Ready to go straight to work

2.85m working width - Serial No: 98713 - Loading available onto trailer - Paintwork is good all round and the flails are in good condition - Always stored under cover - No known faults

New wheel - Working order - PTO - No gate - Loading available onto trailer or similar

Spares or repairs - C/W detached rear collector - Used - Non runner

Finishing mower - 3PT mounted - Manual height adjustable - Working order

Used - PTO driven - 3PT mounted - Trolley wheels

Mounted - Low use - Twin tine seeding kit - Control screen and manuals - Ready to go

Used - For F series ride ons - 2019 build - Manuals included - C/W PTO shaft

Used - 2016 - Good condition for age - Good replacement deck

Pneumatic DL - C/w disc markers - Pipe work appears in good order - C/w PTO - Tyres have good tread and holding air - 3 point linkage or A frame mounted - C/w ESC control box - Hopper solid - Used last year - Barn stored

80 X 90 4 strings - Bale count unknown - Used this year - Control box showing fault with one con-rod sensor - Baler works ok with one sensor working with manual

All working and used this season - for sale due to upgrade

All working and used this season - for sale due to upgrade

Kuhn GMD 77 2.8m cut in Claas colours - All runs up & mows good - Bed & gearbox oils have been checked - Loading available

2019/2020 year - 3.2M cut - Hydraulic folding - Just had bed and gearbox oils changed - Good skids - Runs up and cuts nicely - Has had a repair to the skirt at some point shown in pictures - Loading available

Spares or Repairs - Bought to use but discovered a bearing has gone on one of the Ujs - Bought from a dispersal sale - Does tow well on the road despite how it looks - Manual headland tilt - Wide angle PTO

Working order - C/w twin blades to chop grass - PTO guards need attention and deck has some rust holes

Working order - Needs some welding on the frame and deck has surface rust

1 tine missing - Last used around 15 years ago - Selling due to being to small for the required work - 1 owner from new - Purchased from Halse's of Honiton - Used on around 150/200 acres only - paint still showing on original tines

2.45M Cutting width - hydraulic side shift - c/w rear roller

SN: 71200326 - C/w electric control box & remote control working as it should - 750mm wrap size - Owned from new - In good working order - Only selling due to upgrade

Mounted linkage - Lights untested - Electric control box - All works as it should - Has had a small fire due to bearing failure but has been repaired by main dealer at a cost of £1700

Rotor bearings have been replaced in last 12 months - Tidy machine - Hydraulic folding - Tires in good condition

PTO driven - C/w PTO - C/w 9 canvasas odd one has hole and repairs - Right hand cut - Working when last used in 2023 - Knotters working when last used - Rollers in good order - Levers all free and working - For sale due to ill health

C/w Kohler command pro15 petrol engine - Metalwork in very good condition - Front and rear height adjust - All tyres good - Electric and pull start - Serviced and in working order - Parked undercover

Serial No: 1025 - C/w control box - C/w PTO shaft - Working order - Last used spring 2025 - Barn stored - Some functions now run off tractor spool valves

Serial No: 081150055 - 5.5T capacity - Approx 100m of 10mm wire rope - C/w guard, choker chains and clevis attachment - Bought new from Halse for time project, used handful of times and barn stored since - Tidy machine in working order

Hydraulic auto reset leading tine - Stocks seeder controlled from main control box, including rollers for Avedex, slug pellets and small seeds like clover - Uses spreader plates on rear or can go into air stream to be drill with seed - Drill has second row of following harrow added - C/W leading discs as well as tine so will drill into cover crops etc with out blocking - C/w almost new A shares fitted with splitter boots, used for cereals - 3 inch spoons with short boot, used for spring beans etc & separate bean drilling kit. Also a set of warn A shares used for OSR. Comes with a large selection of various spares as well - Only for sale as after using Claydon for at least 7 years I’m moving to even less disturbance as soils have improved. - Loading available

Hydraulic drawbar - electric joystick controls - tyres holding air - c/w pick up hitch - electric spout - PTO cover needs alteration - Working order when last used 5 years ago - Barn Stored

6 rotor tedder - Tyres holding air - PTO shaft and cover intact - All tines present - Lights present (untested, one front missing) - Rear lights bumper bent - Used recently

32,821 bale count - Tyres holding air with good tread - Cable controls - Working order - Been in use in 2026, sale due to upgrade

Has had new chains, flails, bearings, PTO guard - Repainted - Good tyres - Good working order

Used to do a small acreage this year - all tines present - tyres holding air - working order

Working order - used recently - all tines present - all tyres holding air - only being sold as buying a newer one - electric control box

6m working width - one soft tyre - only being sold as surplus to requirement - can be front or rear mounted (A Frame) - no PTO required

Discs are 26'' diameter - spares or repairs as needs a new hydraulic ram

2011 Kverneland NGH 301 Power Harrow - 2011 Kverneland Accord DA Seed Drill - C/w Trailing Tines - Quick fit power harrow tines with reasonable metal left - packer roller - suffolk coulters - C/w Controls - No visible oil leaks /weaps - C/w PTO - Tidy combination for age - C/w Hydraulic Disc Markers

C/w PTO - 24m Spreading width - 2,500kg Capacity - No weigh scales - C/w control box - C/w Roll Over cover - needs one plastic cover re fitting in corner of tub, vendor will likely fit this prior to collection - some corrosion in places

C/w PTO - tyres holding air but some perishing - Some tines worn and would benefit from replacing - popular machine - very small crack needs welding as pictured

XM900 - New tips fitted - Hydraulic Vari-Width - Land wheels - no evidence of previous welds - shear bolt protection - tidy plough

Working and used on 200 acres this year - New Diaphragm - Hydraulic folding - Induction Hopper - No NSTS test certificate

2017 - Owned by the same farming family since new (2 farming siblings) - Europrofi Combiline 5010 - Always dry stored and oiled before storing - load details in photos and will increase slightly - all tyres have reasonable tread of approx 12mm - had new wide angle PTO shaft with slip clutch in 2024 - sale due to upgrade of larger machine of the same type - 29m3 loading capacity - 1.85m pick-up width

Purchased new in 2021 - Done little work on a smallholding - Always kept in a shed - Loading available by arrangement

Auto lube - Came out of a Claas 850 forager - Working when last used last year

Approx 9'6'' working width - PTO shaft present - Some signs of rust

C/w PTO shaft - Brakes and lights not working - 1 nearly new tyre - Dents in barrel but no holes - Chains need replacing/ shortening - Unused for a year - Needs new PTO guard, hydraulic hoses and some replacement chains

PTO shaft - Never been welded - Missing a gate and a couple of tines - Good tyres - Been used for tedding the last few seasons - Loading available on to trailer or similar

8' wide (homemade) - 7 pig tail tines - Front stand - Usable condition

Had little use, good metal - Purchased for ploughing matches but never used - No mechanical loading - Plough No: 85322

500mm wrap - Electronic counter - G.W.O

Homemade - PTO shaft present but needs guards - 3 point linkage mounted

Approx 16' long - Working order - Not PAT tested - Has had some repairs

Needs new tines, some missing - No PTO shaft - Last used 2025

Flips over to push and pull - Some corrosion to metal work

Spares or repairs - 1.2m wide - Been barn stored for years - Needs new tyres and PTO shaft - Some corrosion and holes in tin work

Spares or repairs - Been stored inside for years - Would need some new tines and springs - PTO shaft present - Some corrosion

INTERNATIONAL 445D CONVENTIONAL BALER (S/R) - Spares or repairs - 5' pickup - Last used 10 years ago and parked up inside - Has broken needle - Needs new tyres - PTO shaft present - Some corrosion to tin work

Been stored inside - Tyres hold air but perishing - Some corrosion

Working order - Not used recently - C/w PTO shaft and covers - 56'' working width - 3 point linkage mounted - suit compact tractor

Single furrow reversable plough - 3 point linkage mounted - Depth wheel - Barn stored - Doesn't appear to have been used

Used last season - Very good condition - PTO cover intact

Spares or repairs - PTO driven - Rusted bottom saucer and rust on body.

Serial no. 3885 - Good order - No bent arms etc - Used this year - Now upgraded to twin rotor.

Concrete filled - Has filling bungs - Loading available - New drawbar fitted - Well used but in good working condition

Spares or repair - Needs lever repair to spool block

Unknown make and model - C/w PTO - All in working order - Solid bed

Sputter needs repair - 3 point linkage

Size 1200

Spares or repairs - Year and make unknown - Loading available

Working order - Loading available

30mm pin diameter - 142mm x 120mm - 800mm wide - Small dent in casing - Has been used on a Kubota KX61-2A and can suit up to a 3T excavator - C/W all the pipe work - Can come with a roller if required

Spares or repairs - Make unknown - 30mm pin size - 1800mm wide - Can fit up to a 3T machine - The part that attaches the bale to the motor has broken

500L capacity - Wagtail spreader - Working when last used

Spares or Repairs - 6M wide - Mat requires attention

Small bales - Conventional baler - Year unknown - C/w PTO shaft - Missing the flywheel guard - only selling as we do round bales - Been a good baler and always kept indoors - C/w twine, a bucket of spares and original manual - One tyre is ok and the other was replaced only a couple of years ago - Ready to go to work

Very strong - 9' wide - Tines all present

Tyres holding air - Some rot on barrel - Hydraulic lid - Not used for at least 2 years - PTO shaft requires cover - Most chains present - Usable condition.

Spares or Repairs - Tanco brackets - Ram & hydraulic pipes are with it but look a bit rusty - Never used it so can't say how it works - So selling as spares or Repairs but probably wouldn't take much to get it working

Honda GX340 engine - Tyres holding air - Working when last used

Working order - C/W electric motor - 13AMP - 2 flat tyres

Serial No: 35-VKMATV120HB - Running and working well this year despite flaking paint work - Fully height adjustable - Flails complete - Recent oil change on Briggs and Stratton engine - Starts first pull

Approx 6' - Good working order

Good working order - 2000L - S/N: 09/DS01 180 - Hydraulic shut off

3 point linkage - Mounted - Lights untested - Spool

Folding wings - 11'6'' overall width - Usable condition - Missing a few feet.

10T pressure - Safety spool operation (two handled) - Working order