Manual yoke - Scales are in the shed - Sides open to access - Heavy locking crush - Race not included

Consists of 3 x 8' long curved sheeted panels - 1 x 8' backing gate - 2 x 7' long sheeted panels - 1 x 4' sheeted gate - 1 x sliding gate - 4 x fixing frames - 12 x pins - Crush not included

C/w plumbing - No holes

Split metal corner

Spares or repairs - Good working condition - 6' x 2 - Loading available - Lorry at the location - Lorry size 8 wheeled

Spares or repairs - Trough 8' 6'' x 4' - Loading available - Lorry at the location - Lorry size 8 wheeled

128cm long, 80cm wide, 42cm high - Solid and sound - No assistance is available with loading and must be removed within 10 days of the sale end

Marked 8 - Mains powered - C/w case - Working - This lot is part of a genuine dispersal due to bereavement. All lots are available to view & collect by appointment with the vendors.

Marked 15 - Manual yoke - Chequre plate floor - Tubar weigh head (support frame needs some TLC) - Full side access (3 panels each side) - Solid, well built crush in good order for age - This lot is part of a genuine dispersal due to bereavement. All lots are available to view & collect by appointment with the vendors.

Marked 16 - Adjustable rump access - Good trough although thin in places - Fully galvanised - Pallet fork slots - This lot is part of a genuine dispersal due to bereavement. All lots are available to view & collect by appointment with the vendors.

Marked 17 - C/w weigh bars & Tru-Test weigh head (EW5i) - Chequer plate floor - C/w rump bar - Manual yoke - Very tidy, had little use - Full width sliding lid - This lot is part of a genuine dispersal due to bereavement. All lots are available to view & collect by appointment with the vendors.

Marked 18 - Sliding lid - Trough appears solid but some corrosion in it - This lot is part of a genuine dispersal due to bereavement. All lots are available to view & collect by appointment with the vendors.

Marked 20 - Weigh function needs some TLC but does work - Two wheels & handles - Solid - This lot is part of a genuine dispersal due to bereavement. All lots are available to view & collect by appointment with the vendors.

Marked 21 - No weigh function - Two wheels & handles - This lot is part of a genuine dispersal due to bereavement. All lots are available to view & collect by appointment with the vendors.

C/w salter weigh scales - Solid/Strong metalwork - Working - This lot is part of a genuine dispersal due to bereavement. All lots are available to view & collect by appointment with the vendors.

New & unused - No plumbing parts included - Single sided

New & unused - No plumbing parts included - Single sided

New & unused - No plumbing parts included - Single sided

New & unused - No plumbing parts included - Single sided

New & unused - No plumbing parts included - Single sided

New & unused - No plumbing parts included - Single sided

New & unused - No plumbing parts included - Double sided

New & unused - No plumbing parts included - Double sided

New & unused - No plumbing parts included - Double sided

New & unused - No plumbing parts included - Double sided

New & unused - No plumbing parts included - Double sided

New & unused - No plumbing parts included - Double sided

New & unused - No plumbing parts included - Double sided

New & unused - No plumbing parts included - Double sided

New & unused - No plumbing parts included - Double sided

New & unused - No plumbing parts included - Double sided

New & unused - No plumbing parts included - Double sided

New & unused - No plumbing parts included - Double sided

Foil sealed bags of Herbal Ley Seed - Tonic, Burnet, Aurora, Sheep's Parsley, Yarrow, Leo, Virgo, Puna ll Chicory, Endure

C/W foot trimming kit - Suits smaller cows, was originally used with a Friesian dairy herd in the 1990's/2000's - Galvanised - Good condition - Chequer plate floor - All foot trimming attachments present - Winding handle to lift hip/leg requires attention at the rear of the crush - Yoke works well - Has brackets welded on to accommodate Tru-Test MP1010 Load Cells - Additional brackets welded on rear to join hurdle on - This lot must be collected wihtin 10 days of the sale closing

Odd hole but plenty of life left.

Extendable legs - Forklift eyes - Trough has some rust holes

C/w ballcock and plumbing - C/w IBC fitting

C/w brackets

All new & opened - Out of date (2022-2023).

1 x 1 litre - 1 x 2.5 litre - 1kg of copper sulphate (unopened)

Back & 2 sides present - Front panel missing.

Spares or repairs - No front panel - 2' high x 5' long (sides) - 2' high x 3' 2'' long (back)

Marked as F

Marked as 12 - Working when taken down

Marked as 13 - Working when taken down

To fit 15' bays - In good condition - Boards solid

Marked A - C/w furnishings - Top rail showing signs of age

Marked B - C/w Furnishings

Bottom half is meshed - C/w furnishing - Good condition

1 X 107'' long - 1 X 110'' long - 1 X 120'' long - Some missing hangers.

1 X 107'' long - 1 X 120'' long - both with hangers and latches

57'' long - C/w hangers & latch

14'3'' x 7'8'' high (each gate) - No fixings available - Good solid gates

PAIR GATE HANGERS

Roughly 1220mm x 1215mm

Marked A - 5 bars - C/w hangers & latch - Bottom bar is bent towards latch end, otherwise generally straight - This lot is part of an unreserved genuine dispersal to dissolve a partnership.

Marked B - 5 bars - C/w hangers & latch - Good condition and straight - This lot is part of an unreserved genuine dispersal to dissolve a partnership.

Marked C 5 bars - C/w hangers & latch - Damage to top bar which is very bent and upright brackets broken - This lot is part of an unreserved genuine dispersal to dissolve a partnership.

Marked D - 5 bars - C/w hangers & latch - Good condition and straight - This lot is part of an unreserved genuine dispersal to dissolve a partnership.

5 bars - C/w hangers & latch - Wire mesh to half way up - 2nd bar down is bent and broken off bracket - This lot is part of an unreserved genuine dispersal to dissolve a partnership.

Both have one hanging bracket - One has broken bar - Both are in used condition - This lot is part of an unreserved genuine dispersal to dissolve a partnership.

Marked E - 7 bars - C/w hangers & latch - Generally straight - This lot is part of an unreserved genuine dispersal to dissolve a partnership.

Marked F - 7 bars - C/w hangers & latch - Generally straight. A couple of bars have kinks - This lot is part of an unreserved genuine dispersal to dissolve a partnership.

Marked G - 7 bars - C/w hangers - No latch - Some bars are slightly bent, otherwise straight - This lot is part of an unreserved genuine dispersal to dissolve a partnership.

Marked H - 7 BARS - C/w hangers & latch - Damaged in one top corner and slightly bent. - This lot is part of an unreserved genuine dispersal to dissolve a partnership.

3750mm long x 1100mm tall

C/w latch & one hanger - 32'' wide x 37'' high - Good straight

Hangers & latch present - Straight & true - C/w posts 3 1/2'' x 55 1/3'' long, have been cut off at ground level

15' long - 30'' wide

C/w hangers - Straight, strong and heavy duty

C/w hangers and latch - Straight and strong

C/w hangers and latch - Some very small/minor bends

Marked 6 - Solid metal - C/w hangings - Missing some timber - This lot is part of a genuine dispersal due to bereavement. All lots are available to view & collect by appointment with the vendors.

Windrow sledge - C/w baler hitch bracket

920mm high.

3' high - Various lengths - New and unused

New and unused - 6mm x 6mm holes - 91cm x 6m long

Various lengths of stock netting - All removed & rolled up by hand

Working order - C/w stake & charger.

Working order - 12 Volt/230 Volt dual - 3.0 J output

Working order - 240 Volt.

6' x 1' x 1'

Hangings 40'' between - 11'' wide - 9'' deep

Used condition

Some with hangers - Some have slots - Some rust but useable.

Approx 15 x 4/3'' tops used stakes - dry stored - clean condition