C/w mounting bracket - Only been used twice & then dry stored - 6.5hp - Briggs & Stratton engine - No wear on the brush - Starts & runs fine

Roof needs new felt - Could be used as a poultry house

12' stable front (used) - C/w door and wood - Already dismantled

Used 12' stable front - Complete with door and wood - Already dismantled - Metal under door is missing

Used 12' stable side - Complete with wood - Already dismantled

Used 14' stable front - Complete with door and wood - Already dismantled

Used 11' stable side - Complete with door and wood - Already dismantled

Used 14' stable front - Complete with door and wood - Already dismantled

Promatic ranger 8 clay traps - Mounted to a cradle and bolted to a pallet but previously bolted to a trailer - Fully remote control but also c/w cable control as shown in pictures - Adjustable angles and speed - Only used twice a year in 8 years of ownership - Never been stored outside - Mostly been used on a telehandler on hilltop for high bird practice - In good working condition - A reluctant sale-owner putting funds towards a new venture

Top & bottom doors - 44.5'' wide - C/w anti-weave bar - Hinges present

Various sizes - Some cut.

3.6m x 3.5m in total - Galvanised panels - Lockable gate and key present - One side has wooden slide out sides - Has been inside a barn all its life - Good condition - Feltroof to part of run and kennel - Buyer to dismantle

Now unused

Solid - Approx 1120mm W x 1000mm L x 680mm H - Approx 44'' x 39'' x 27''

Dog basket, leads, harnesses, coats, toys, small kennel etc

For poultry use - 38'' diameter - Working order

Suits 13.2hh-14.2hh horse - Interchangeable seats - Brass furniture - Winding balance - Spares basket

To suit 13.2 to 14hh - Brass hames - 20'' x 10'' - Patent leather Full Collar and Brass Hames

Brass furniture - To fit 13.2 to 14hh

Full set of pony show wagon harness by Alex Marsh - Suit 12.2 pony - Top quality fine harness in show condition - Patent and black leather with sewn in traced and tail stand

Alex Marsh of Canterbury private drive set - Full set of private drive show harness - Patent and black leather with full split 16'' collar and hames, full and false britching - Alex Marsh made this delightfully fine set of gig harness for his own pony. In very good condition.

Set of pony show wagon harness by Freedman of Toronto - Suit 13.2 pony - Used by Mrs Hayden - Little used and in excellent condition

Part set (no bridle) - Full 21'' collar and hames - Black patent and leather with box keepers on britching and crupper - All in very good condition

Full set of pony pairs breast collar harness in black patent and leather with brass fittings and buckles - In good condition, but not show - Maker unknown but all parts stamped SS362

Traditional style gig using modern materials, steel wheels and undercarriage, fibreglass body and shafts - Very light and strong - A lovely smooth ride and easy access for driver - Shafts are easily adjustable for both width and height to accommodate ponies up to a small horse - Good and sound for pleasure driving and rallies, but would need work to bring back to show condition

Tall pony Viceroy (ground to seat 32'') show wagon - Sound chassis, body, wheels and tyres - Would benefit from a repaint - Splash and dash boards need re-leathering - Sold with 3 sets of shafts (12.2 metal, 13.2 metal and 13.2 wood), together with 4 new unused tyres

Stylish, traditional built, wooden pony skeleton gig on Dennet springing to suit 12.2-13.2 pony - Structurally sound, but would need work to bring back to show room condition

HOLLY DRIVING GIG WHIP

Pair of oval fronted gig lamps believed to be by Alf Hales - In good condition

1 large - 2 small

2 galvanised chicken drinkers, 1 galvanised chicken feeder - All in good condition

Galvanised dustbin (used as a planter) - Galvanised mop bucket on wheels - Galvanised bucket (no holes)

Very good condition - Little use since purchase - Stored in shed when not in use - Honda GXH50 engine - Starts first pull - Galvanised frame

Poultry drinkers with pipe and some fittings

Longest length-approx 5 m

Honda engine - Electric start - Powerful machine, only been used a handful of times - In very good condition.

Both have started rusting out on the floors.

Marked 83 - No lids and bent/damaged tops - This lot is part of a genuine dispersal

Approx 18 - As new condition - This lot is part of a genuine dispersal

All complete

Approx 12 x 1m gabion cages - Various lengths 2m, 1.5m, 1m & 50cm - Enough to create 12m x 1m wall (approx)

C/w standard size clay holder and midi - C/w wireless long range remote control, foot pedal control and cable button control - This trap can control two traps from the wireless remote by use of the extra link wire simply plug and play or it can be used to stop/start a ATB wobble base unit - Quick connection battery clips for easy removal and fitting of the battery.

Marked 132 - This lot is part of a genuine dispersal

Good condition - C/w saddle stand and cover

3 Metal - 1 plastic - All sound

Cleaned and disinfected - Clips complete - Marked 1

Cleaned and disinfected - Clips complete - Marked 2

Cleaned and disinfected - Clips complete - Marked 3

With necks - CLeaned and disinfected - Clips complete - Marked 4

Approx 140cm x 47cm - Has had little use - Felt roof, wooden frame and wire mesh

9 poly pad style pads - Most in used condition - 3 of them have very little wear and 1 mattes fleece lined numnah

Marked 1 - Usable condition

Marked 2 - Usable condition

Marked as 6 - Tyres appear to be holding air

Marked as 23 - Manual trap - Clays and gun cases

Was originally a field shelter but has been used indoors as a stable - Has 1 bottom door - Made from galvanised steel and plastic - C/w bag of fixings.

Marked as 95 - Large dog - Approx 3' wide - This lot is part of a genuine dispersal

Marked 96 - Large dog - Approx 3' wide - This lot is part of a genuine dispersal

4 round rubber feed bowls - One with a slight split - One rectangle shape - All used but been washed out

Removed from boat engine - Working order when removed - Kept as spare

To include 2040 bonnet - Drawbar, top link, starter etc - 14 items

Glass good - Latch included - One hinge missing

22'' diameter - Good cast rings

Some with points

2 x 70cm closed - 1 x 60cm closed

Quantity of tines

Used but good condition

150w - Working order when removed

Untested - 12v

Pumps, boxes, shafts etc.

Refurbished & never used since

Conversion bracket No3 - Proper made with lock pins

Spares or repairs - Massey Ferguson loader to Euro conversion bracket - It is homemade and strong but not quite right and needs altering

Only used a handful of times since purchasing new approx 2 years ago - C/w brackets - Working

Gold Star 10 8 roller vane pump - Not used for many years - This lot is part of a genuine dispersal on behalf of a deceased estate and the farm is being sold. - Please note that much of the machinery equipment has not been used for many years and the farm has no capability of loading heavy or large lots.

Turns freely - Plus spare wheel - This lot is part of a genuine dispersal on behalf of a deceased estate and the farm is being sold. - Please note that much of the machinery equipment has not been used for many years and the farm has no capability of loading heavy or large lots.

Bottle jack working - PTO air pump not used for many years - This lot is part of a genuine dispersal on behalf of a deceased estate and the farm is being sold. - Please note that much of the machinery equipment has not been used for many years and the farm has no capability of loading heavy or large lots.

From case trailed sprayer - Has separate clean water tank

Unused

All new

New

New

10m hose - Blow gun - Brake liner adapter - All new

Top link hydraulic Cat 3 ball/3 ball - CC= 520mm - No oil pipes

1 pair new

1 new pair

New m16-1.5mm

Spares or repairs - Both second hand - One has a bad oil leak - Other one looks OK - Both sold as seen

1 new set of brackets - Only 1 of 2 in picture

PTO shaft 1350mm - 1.3/8 6 spl QR/QR - New

1/2'' BSP ports - Flow control & relief - New & unused

C/w glass - Catch present - One damper missing - Hinge damaged

Spares or Repairs - Has an issue with No1 piston, otherwise complete

Also fits Renault - New reconditioned - Marked AZJ 3261 - 12v - 3.1kw

New