No plumbing

Both have holes & don't hold water

Hook over - Teats may need changing

Hook over - Teats may need replacing - Please note 1 has been photographed to represent multiple lots

Hook over - Teats may need replacing - Please note 1 has been photographed to represent multiple lots

Hook over - Teats may need replacing - Please note 1 has been photographed to represent multiple lots

Hook over - Teats may need replacing - Please note 1 has been photographed to represent multiple lots

C/w attachments - For sale due to ceasing milking

Wooden floor replaced 2 years ago - All working as should - C/w belly band & foot straps

21 Feed Spaces - Galvanised - 92'' Diameter - No Damage

Steel frame solid - 1 timber board loose - 20 feed spaces

Made up of 64 2.68m x 1.4m panels - 16 panel circumference, 4 tall - C/w pipes & bisele pump - C/e framework - C/w 2yo internal stirer / PTO driven - Please note buyer to dismantle & have relevant insurances & qualifications to do so. - Empty to bottom panel so will need dismantling from top and once part dismantled vendor will clear remainders of slurry

Fully galvanised - Sleepers not included - C/w hangers

No damage

3 missing drop pipes - C/w troughs - Galvanised - Buyer to dismantle

Working order - Little use

Type: TAP5-VS2-32 - 230v - IFS ready - C/w control box - C/w calf crate & teat - Never used - Barn stored - C/w manual

Type: TAP5-VS2-32 - 230v - IFS ready - C/w control box - C/w calf crate & teat - Never used - Barn stored - C/w manual

Type: Feeding station synchro feed single IFS V03 - Fully galvanised - C/w teak - Never used - Barn stored

Type: Feeding station synchro feed single IFS V03 - Fully galvanised - C/w teak - Never used - Barn stored

Some bends and kinks but usable - Galvanised

Good condition

Good condition

Galvanised sides - Wooden floor - on wooden runners - Approx 7' x 5' - IAE sides - Built on timber bottom

Spares or repairs - Weigh scales not working - Head yoke gates - Wooden floor needs attention - Could be usable with a bit of work

One side and back is steel sheets welded onto box iron posts - Side is 91'' high x 16' long - Back is 91'' high x 12' long - Otherside is 20' long - Steel plate to bottom half and plywood to top half - On 3'' x 3'' box iron sections - Very strong structure - Being removed as no longer needed in shed - Buyer to remove by unbolting and cutting off at ground level - Loading available - Viewing recommended

Usable condition - Kink in bottom

Good working condition - 6' x 2 - Loading available - Lorry access up to 8 wheels

Good working condition - 6' x 2 - Loading available - Lorry access up to 8 wheels

Aged wooden boards but solid - Solid framework - Some corrosion on very bottom bat but still solid - Loading available.

Had very little use from new - Solid wooden floor - Front yoke - Transport wheels - Fully galvanised - 3' long X 3'4'' high X 1'' wide.

C/w 12 pins - All in good straight and strong order - 1m high - Ideal for lambing pens, calves or other.

Big enough for calves, pigs or sheep - 1.55m long X 1.15m high X 21'' wide - Salter scales working.

4' wide X 26'' deep X 3' high at the highest point - 1 prop damaged - No holes - Generally very tidy order.

Solid trough, no holes - Legs strong - Galvanised.

Lockable head yokes - Spring pedestrian doorway - All unbolts to remove/load - Used to milk 2 cows - 3.5m wide - No loading available UNTIL 20th October - No viewing available, phone calls welcome.

Marked 1 - Some bends & faults but useable. - No loading available UNTIL 20th October - No viewing available, phone calls welcome.

Marked 2 - Some bends & faults but useable. - No loading available UNTIL 20th October - No viewing available, phone calls welcome.

1 wheel broken

Good condition

Marked 3 - Some bends & faults but useable. - No loading available UNTIL 20th October - No viewing available, phone calls welcome.

To fit 15' bays - In good condition - Boards solid

Marked A - C/w furnishings - Top rail showing signs of age

Marked B - C/w Furnishings

Bottom half is meshed - C/w furnishing - Good condition

1 X 107'' long - 1 X 110'' long - 1 X 120'' long - Some missing hangers.

1 X 107'' long - 1 X 120'' long - both with hangers and latches

57'' long - C/w hangers & latch

14'3'' x 7'8'' high (each gate) - No fixings available - Good solid gates

PAIR GATE HANGERS

Roughly 1220mm x 1215mm

Marked A - 5 bars - C/w hangers & latch - Bottom bar is bent towards latch end, otherwise generally straight - This lot is part of an unreserved genuine dispersal to dissolve a partnership.

Marked B - 5 bars - C/w hangers & latch - Good condition and straight - This lot is part of an unreserved genuine dispersal to dissolve a partnership.

Marked C 5 bars - C/w hangers & latch - Damage to top bar which is very bent and upright brackets broken - This lot is part of an unreserved genuine dispersal to dissolve a partnership.

Marked D - 5 bars - C/w hangers & latch - Good condition and straight - This lot is part of an unreserved genuine dispersal to dissolve a partnership.

5 bars - C/w hangers & latch - Wire mesh to half way up - 2nd bar down is bent and broken off bracket - This lot is part of an unreserved genuine dispersal to dissolve a partnership.

Both have one hanging bracket - One has broken bar - Both are in used condition - This lot is part of an unreserved genuine dispersal to dissolve a partnership.

Marked E - 7 bars - C/w hangers & latch - Generally straight - This lot is part of an unreserved genuine dispersal to dissolve a partnership.

Marked F - 7 bars - C/w hangers & latch - Generally straight. A couple of bars have kinks - This lot is part of an unreserved genuine dispersal to dissolve a partnership.

Marked G - 7 bars - C/w hangers - No latch - Some bars are slightly bent, otherwise straight - This lot is part of an unreserved genuine dispersal to dissolve a partnership.

Marked H - 7 BARS - C/w hangers & latch - Damaged in one top corner and slightly bent. - This lot is part of an unreserved genuine dispersal to dissolve a partnership.

3750mm long x 1100mm tall

C/w latch & one hanger - 32'' wide x 37'' high - Good straight

Hangers & latch present - Straight & true - C/w posts 3 1/2'' x 55 1/3'' long, have been cut off at ground level

15' long - 30'' wide

C/w hangers - Straight, strong and heavy duty

C/w hangers and latch - Straight and strong

C/w hangers and latch - Some very small/minor bends

Marked 6 - Solid metal - C/w hangings - Missing some timber - This lot is part of a genuine dispersal due to bereavement. All lots are available to view & collect by appointment with the vendors.

Windrow sledge - C/w baler hitch bracket

920mm high.

Marked 88 - 1 x 8' - 1 x 9' - Both used/ weathered but solid and strong - This lot is part of an unreserved clearance sale due to ill health and the sale of the property. - All lots should be collected on Monday 19th October between 10am-3pm or Friday 23rd October between 8am-12noon with no alternative collection days or times available. - There is no mechanical loading assistance and buyers must load themselves in all cases.

Duchy timber garden gate with ironmongery - Width approx 52'' - Height approx 71'' - No rot

Cladding has been removed and is not included - The pair were hinged and each gate measures 3.4 wide by 4.7 high - Made of 80 x 80 mm box section - Very heavy well made frames would cost a lot to buy the steel and fabricate them

Hangers and latch present - Good condition - Straight

Straight and true - One hanger missing - Marked 1

One bar slightly bent - Hangers and latch present - Marked 2

Slight kink in top rail - Hangers and latch present - Marked 3

Straight and true - Hangers and latch present - Marked 4

Slight bend on top bar - Hangers and latch present - Marked 5

Slight bend on top bar - Hangers and latch present - Marked 5

Straight and true - Hangers and latch present - Marked 7

Slight bend on bottom bar - Hangers and latch present - Marked 8

Latch present - No hangers - Bowed - 2 rails bent - Marked 9

In good condition

Height - 28'' - Width - 8' - Never been used

12' gate with latch but no hangers (7 bars and generally straight) - 15' gate with latch and hangers (5 bars and has damaged bottom bar)

Fully galvanised - Bottom is 6' tall - Top is 4' 2'' tall - C/w hangers & latch - Tidy