Wam Group bulk solids auger - Very good condition - Only done 350 hours from new

C/w PTO - Used on 19/09/2026 - Working order - C/w PTO for piggy back drill - C/w rear packer roller - C/w levelling bar - Tines have some wearing metal left - No holes in bed - For sale due to upgrade

4 tyres holding air - All arms and tines present - Tidy central skirt - C/w front prop - C/w PTO shaft - 4.2M working - Always dry stored

C/w PTO shaft - Some previous repairs as pictured - Good flails - Not used this season but put away working - Contractor with own machine employed this year instead - Vendor has a 75HP tractor which may be able to assist with loading - If required, loading with a telehandler may be possible by arrangement - Viewings and enquiries welcome

Heavy duty ballast roller - Roller currently full - 8' Working width - C/w filling bungs - Loading available

Lights untested - C/w PTO shaft - Weigh display screen not currently working - Tyres average condition - Serial number: MF32A259

58'' cutting width - Full working order - C/w spare hydraulic mower - Viewings and enquiries welcome

C/w PTO shaft - 3 point linkage - Serial No: 01ND99 - One owner from new - Good working order - Semi independent hydraulics, cable controls - Used this year and can be seen working - Head runs smooth and quiet - Has instruction manual - PTO guard needs attention - Loading available

Working - Low use

8'' woodchipper, single hydraulic feed roller - Barn stored - Low use and working when last used

C/w PTO shaft - Tidy for age - Still on original tines - Some tines missing - Genuine dispersal due to relinquishing farm tenancy.

C/w PTO shaft - 3 point linkage - Manual control type - T flails - Serial NO. 11PA18 - Owned for 10+ years - Reluctant sale - New drive hub and 6 spline drive couplings - New head bearings and rotor balance this year - Lift ram seals done in 2024 - New hydraulic oil in 2026 - Flails only part worn on one side - Only done 100 acres per year since current owner has had it - Used in 2026.

Serial No: 1255 - 2.5m working width - C/w PTO - Good machine - Strong and well built - Not done much work - Loading available

3.5m cutting width - C/w PTO shaft - No grass conditioner - GWO - Tidy for age - Genuine dispersal due to relinquishing farm tenancy.

Serial No: RABu85 - 3 point linkage - C/w PTO shaft - Lights working - 6.5m maximum reach - Revolution controls (touchscreen and joystick) - Serviced and working - Hammer flails - Good machine - Too much for the vendors acreage now - Telescopic plus orbital head - No head vibration at all - Only done 240 rotor hours, will go up a bit as vendor has a couple fields left to do

Twin axle - Good bearings and chains - Tub is in good condition and lid has been rebuilt this year - Brakes working

Spares or repairs - 23.1-26 tyres (one recent new one) - Slurry door - Sprung axle - Lights and brakes present (untested) - PTO shaft and cover intact - Bed chains look good - Present owner has owned it since 2015 only been used to spread wood chip 4 times a year - Used recently until floor drive gearbox packed up, otherwise, everything else in working order - Very tidy for year - Replaced with new model

3M wide working width - Crumbler roller - Good tines - 1 slight oil leak - Working order, has A frame to fit piggyback drill (see lot 733) - Used recently

Electric box - Hydraulic bout markers - Some pipes perished, needs replacing - Usable condition, was working when last used -

Age unknown - C/w PTO shaft - Lights untested - C/w working electric weigh display - 16 cubic meters - Serial No: 27947 - Tyres are like new - Blade in good used condition - All working and is used on a daily basis - Draw bar sensor needs replacing

In running order but wiring work is needed, 2 control boxes are included - Has been dry stored

PTO driven - C/w PTO - C/w 9 canvases odd one has hole and repairs - Right hand cut - Working when last used in 2023 - Knotters working when last used - Rollers in good order - Levers all free and working - For sale due to ill health

1.5hp single phase motor and starter - Working when last used but not been used for several years

Original implements silo push buckrake - Not used until 2019 - 9' wide push off - Hardex tines - Lights working order - Heavy duty - Recently used

Serial No: 1061134 - Early 90s - 2.5' bale size - 2.5' pick up width - C/w control - C/w PTO shaft - Barn stored always - Not used for 10 years - New hydraulic pipes fitted and wide angle PTO fitted

SN: S-6854-AD22 - Trailed - Lights working - Swivel shute - Electrical control box - Tyres in good condition - Bought new & regularly greased & serviced - Always been barn stored - Purchased for a small suckler herd to make my fathers job easier - Not done a lot of work - Good condition

C/w PTO shaft - Lights working - C/w working electric weigh display - Serial No: 2274 - 16 cubic meters capacity - 4 blades are missing but remaining blades are in good used condition - Tyres all in good condition - Has not been used this year - Had new weigh bar sensors installed 2 years ago

Hydraulic vari width - Knock on points - Shear bolt - Good straight plough ready to go to work

Serial No: 604104 - 6m working width - Hydraulic folding - Good set of galvanised 8mm tines with none broken or missing - C/w Opico Air 8 seeder - Electric controls - Tank agitator - C/w calibration tray/charts, operators manuals and wiring for tractor etc - Seeder is newer than harrows - Used this season and worked well

Serial number: C1867 - C/w PTO shaft - Grass conditioner - Cutting width of 2.8m - Two new skids fitted this year - Many new nylon conditioner tines fitted - Bed oils checked - New PTO guard fitted - Good skirt - C/w spare set of blades and manual - Worked well when last used - Loading available

SN: 1051 - Lights working - C/w PTO shaft - Working electrical weigh display - Could do with new blades - Has crack on side walls of tyres - Bought as a back up machine but never needed to use it - Now for sale as planning on purchasing a new one.

Serial number: 11492 - 800/65 R32 Tyres - 11,000 litre pump - Hydraulic brakes - hydraulic changeover - Swivel hitch - C/w PTO shaft - Lights and brakes working

Believed to be 1980's - 1.2m head working width - 4.5m maximum reach - Cable controls - C/w PTO shaft - J flails - Fully independent hydraulics - Loading available

Mounted - Good working order - C/w PTO shaft

3 point linkage - Good working order

C/w PTO shaft - Good working order - Loading available

C/w PTO shaft - Lights and brakes not working - Good condition for age - No rust holes - Can be worked by a small tractor

3 point linkage - In working order

Working order when removed in December 2025 for farm sale

2013 Pottinger Novacat H ED Mower Conditioner - 10' cutting width - Serial No: VBP00021003001264 - Good condition - Used this season - Can be transported upright or straight behind - C/w PTO shaft

4' head working width - 5.5m maximum reach - 3 point linkage - C/w PTO shaft - Lights working - Joystick control - T flails - Serial No: S114694 - Vendor has owned for last 6 years - Can be loaded onto a car trailer - Runs well - For sale due to the vendor buying a newer machine with more reach

Year, make and model unknown - No loading available

Has done light work and been on same farm most of its life - Always dry stored - C/w PTO - Last used 2 years ago - Good working order - 3.2 metres working width

DP 8R Auto reset - Serial No: 614321016 - Good working order - Used this year - Hose and few worn parts replaced

400kg - Hydraulic side shift - Side tilt - Forward & backwards tilt - Pipes present - Spool controls - Free fall action - Sale due to it genuinely being surplus to requirements, winding back.

23,358 bale count - Only selling due to upgrade - Been used this season - Approx 2m pick up hitch with crop press rollers - C/w PTO & control box

Mounted on hydraulic raise and lower trailer - Ideal for moving around yard or land but not designed for road use - Has folding log deck attached to trailer with hydraulic conveyor indeed - It has 4 and 6 split and it is possible to hook up a dust extractor - It is PTO driven and needs a minimum of 50HP to drive it and a 12volt supply to power cooling fan for hydraulics.

Working order - Last used Summer 2026 - Slight oil weep on one ram and one side roller is a bit noisy - Hydraulic folding - Approx 12' working width - C/w PTO - Solid metal work but showing rust - Good tyres

Working order - Very good wearing metal & comes with some spare shares & points - Used last season - Sale due to reduction in arable production

Very Tidy Condition - 1 Farmer Owner from new - Joystick Controls - New Flails last year - Greased Religiously - Any inspection / enquiries welcome

Swivel shute - C/w PTO shaft - Mounted - Viewing and enquiries welcome

Trailed machine - C/w swivel shute - Rear lights (one side damaged) - C/w PTO shaft - Good paint - Electric controls - Viewing and enquiries welcome

2018 show model - 540 PTO - Belt driven - Used for the first time in 2019 - One owner - Barn stored - Trailed machine in excellent condition.

Working - Engine has had a top-end rebuild a few months ago - Tyres holding air - Key Start Working - Used in recent weeks but now no longer required

C/W PTO - Cable controls - 3 point linkage mounted - 1.3m head - Power stew - Flails would benefit with being changed - Some hydraulic pipes perished

As new - 8ft cut - Cut less than 100 acres by a retiring farmer

New PTO guard recently - Spare tips & star joints - 12'' auger - Spare auger included

12m working width - Blob marker - Not tested - Electric box included - Working order - Used recently - Hydraulic lifting booms - Holds 1000L

3 point linkage mounted - Good condition - 15 ton ram

Swing over, A frame

Spares to fit Twose finger bar hedge trimmer

9' wide - All tips present - Old but usable

3 point linkage mounted - 6'6'' wide - Good rubbers

3 point linkage mounted - PTO shaft requires new guard - Working when last used

Tines all present - Tyres holding air - PTO intact - Usable condition

Spiral log splitter with PTO shaft - Working when last used in the Winter

8' roller and frame - Good rings

C/w discs & skims - 1 mouldboard has been welded - Depth control free

C/w discs and skims

Barn stored - Original condition

3 point linkage - No PTO guard

6'' rollers - C/w PTO shaft and guard - Working order

For quad or compact tractor - Disc - Been dry stored - Control linkage will need freeing off - Will need minor recommissioning as it has been in dry stored for some time - Sold as seen

In frame (total width 9') - Believed Twose - Water filled (empty) - Not used for 10 years - Buyer will need to load themselves - This lot is part of a genuine dispersal on behalf of a deceased estate and the farm is being sold. - Please note that much of the machinery equipment has not been used for many years and the farm has no capability of loading heavy or large lots.

Total width 7'6'' - C/w side wheels - 3 point linkage - All tines present - This lot is part of a genuine dispersal on behalf of a deceased estate and the farm is being sold. - Please note that much of the machinery equipment has not been used for many years and the farm has no capability of loading heavy or large lots.

C/w front bar - Approx 12' width - This lot is part of a genuine dispersal on behalf of a deceased estate and the farm is being sold. - Please note that much of the machinery equipment has not been used for many years and the farm has no capability of loading heavy or large lots.

Last used 3 years ago - C/w PTO - One tine broken otherwise all present - Put away in working order - This lot is part of a genuine dispersal on behalf of a deceased estate and the farm is being sold. - Please note that much of the machinery equipment has not been used for many years and the farm has no capability of loading heavy or large lots.

Spares or repairs - Wooden frame (approx 5' wide) - 2 vintage wheels are not attached - Vintage wheels are marked 'Tucker, Hatherleigh' and 42'' diameter (mainly wooden and showing woodworm) - This lot is part of a genuine dispersal on behalf of a deceased estate and the farm is being sold. - Please note that much of the machinery equipment has not been used for many years and the farm has no capability of loading heavy or large lots.

9 legs - 3 point linkage - This lot is part of a genuine dispersal on behalf of a deceased estate and the farm is being sold. - Please note that much of the machinery equipment has not been used for many years and the farm has no capability of loading heavy or large lots.

Spares or repairs - 100 gallon tank - Engine not currently working - C/w spot spray lance

Unknown of age - Working width is 5m - Transport width is 2.77m - No damage to the frame - All in good working order - Can go straight to work - All rings complete - Loading is provided

SN: 202000612017 - Loading available - 1.35m working width - Has only done approx 3-4 hours work from new

Water filled (currently empty) - Recent new wooden bearings - In frame (8 1/2' wide total) - Only being sold as vendor has bought a lead and following roller - Used this year

Not used for 2 years - Working order - No stand or rear gates - C/w PTO

Electric control - Used last year - Please note it does need some attention as hood needs bolting/welding on the ram seal on the head (otherwise in running order) - 1.3m head - Only being sold as vendor has bought a bigger hedge trimmer

Last used a year ago but run up so in working order - New belt this year - C/w PTO - Only being sold as bought a flail topper

Last used approx 5 years ago - No pipes - Working order - Tyres 30% tread with perishing - 1600 gallon

Used this year - Straight - Metalwork is usable

2 drum mower - Mows 6' width - Good condition - Skirts good - Slight crack on hood - Bought but never used by present owner

Manual adjustment of mast and tilt angle - 226kg weight - Hydraulic ram is dry no leaks - Forklift available for loading

C/w grass seed spreader tines - Barn stored - Oiled up ready for use - PTO shaft present but requires new cover

Good condition - Was restored some years ago - Sack truck not included

Been stored indoors - Comes with PTO shaft and control box

1 tyre soft - Used last season

C/w PTO shaft - New belt at front - C/w some spares

Marked 9 - C/w PTO shaft - Not used in recent years but was working when put into storage - This lot is part of a genuine dispersal due to bereavement. All lots are available to view & collect by appointment with the vendors.

Marked 13 - Reasonably good order - Adjustable width - This lot is part of a genuine dispersal due to bereavement. All lots are available to view & collect by appointment with the vendors.

In good working order - Will wrap round or square bales - Manual controls all working fine - 750mm wrap - Loading arm goes up and down no problem and can be adjusted to size of bales - Has had a small repair in past does not affect use at all - Wrapper bed spins fine as shown in video and tips the bales off fine - No leaks on any rams - Have got a control box to make it automatic - Control box is untested as current owner has never used this so it's untested but comes with the wrapped

Solid frame. - On ring hitch.