Bought new on farm in 2020 - 16,836km on clock - 1850 hours on clock - Needs new seat and tyres very worn - Not road registered - This lot is part of an unreserved genuine dispersal to dissolve a partnership.

REG: WK70 CVU - C/w V5 - Agri registered - Power steering - 3147 miles - 843 hours - Lights & brakes working - Automatic gearbox - Petrol - C/w tow hitch - 450cc - Front & rear tyres are brand new - Owned from new, regularly serviced

C/w wired-in electric boom and lance spray kit, 2011 - SN: 400294 - 2WD AND 4WD - 124 miles - 44 hours - Lights are working - Brakes are working - Manual gear box - Foot change - Petrol engine (420cc) - C/w tow hitch - Front and rear tyres in good condition - Purchased in 2011 and remains in same ownership - Serviced by Honda agents in 2013 and 2024 (43 hours, 193Km) - Purchased to control weeds on farm, but now redundant due to change of land use

only 1 owner - 2200 hours from new - Full cab with genuine Can-Am doors, opening windscreen and heater - Road legal with V5 - Facelift model with larger engine - 4WD, Difflock - C/w towbar, bull bar, full set of seat covers - Brand new 27'' front tyres and very good rear tyres - Tipping back

Was running when parked 2 years ago - Rear tyres flat/punctured

Starts & drives - Hours unknown, clock not working - Brakes need attention - Good tyres.

4 previous owners - Automatic gear box - Two hitch - Diff lock - Engine size 400cc - Lights and brakes work - Could do with a set of brake pads - Front and rear tyres are in good condition - It was serviced at the beginning of the year, having hydraulic and engine oil and coolant - Has had a new clutch and belt - Brand new rear prop shaft - All the parts are brand new - C/w service manual - Has a cage on the back and a game carrier - Has a folding table at the front, which is good for a shooting rest - It also has a winch and towbar

C/w trailer & tow hitch - 4064hrs - 3 previous owners - Agri registered - Lights & brakes working - Automatic gearbox - Diesel - Front & rear tyres in good condition - Serviced yearly - Works fine, selling due to no longer needed

5064 miles on clock - Ball hitch - All tyres holding air with some tread - Starts, runs and drives - Automatic - Lights working - Front and rear racks - No reg or V5C - C/w manual

1260 Hours - 9647 miles - New engine early 2025 - REG: WA19 BXV - Manual tipping back - Electric power steering - Petrol, 700cc engine - Tyres have good tread & holding air - Barn stored since Spring 2025 - C/w V5 - C/w Tow hitch - Runs, starts & drives - Regularly serviced by C J Keitch (has not been serviced since last used) - Viewing welcome by appointment.

V5C present - 4WD - Diff lock - Agri registered - No power steering - Lights working - Brakes working - Automatic gearbox - Diesel - 900 - C/w tow hitch - Front and rear tyres - nearly new - Recent service by local Polaris dealer (3 months ago) - Have been advised that the prophase requires a new universal joint - This vehicle has been owned for approx 3-4 years and has been a good vehicle - Selling due to upgrade

Spares or repairs - Works but the motor housing is cracked

Spares or repairs - Does not start and needs a new battery

15,260 miles - 1569.7 hours (still in use) - Reg: WF23 AYX - C/w V5C - One owner from new - Selectable 2wd and 4wd - Manual tipping back - Front tyres part worn approx 25% - Rear tyres worn - Tow bar - Lights working - Full cab glass - Opening windscreen

949 hours - In excellent condition - 1 owner from new - Bought from MST 1/9/2009 - Hydraulic tail lift - Always kept in a shed and very well serviced

Marked 5 - 3181.1 hours - 16,496 miles - REG: WJ65 DKK - C/w V5C - 1 owner from new - Full glass cab - Starts, runs & drives - C/w ball hitch - Power steering - Good tyres with tread all round - Lights working - Electric tipping tub - Handbrake working - Some damage to seat - Dry stored - Some corrosion/rust flaking under tub liner - This lot is part of a genuine dispersal due to bereavement. All lots are available to view & collect by appointment with the vendors.

Tyres holding air - Was running when last used some years ago - Needs some TLC - All complete but currently not running - 6.5HP engine

Small petrol buggy - Was used by vendors grandchildren but for sale as they have grown out of this now - Not been used for a couple of years - Pull cord had broken but the vendor has a new one with it - Powered by small Honda engine

153 hours only - Automatic - Bike has had service at 150 hours - head gasket previously skimmed - Selectable 2WD & 4WD - 1 owner from new - Tyres reasonably good all round

26,535 miles - 3445 hours on clock - Reg: BM18 LBP - C/w V5c (agriculturally registered) - Starts, runs & drives - Heater, fan, radio - Opening front windscreen - Electric windows - Front tyres holding air, tread worn - Rear tyres holding air, approx 20/30% tread - Ball hitch - Lights working, front light bar - Rear Left Hand mudguard wobbles & needs re-fixing as shown in video. - Has had lots of maintenence in the last 6 months

Mileage 11000 - Hours only 1350 - Good condition utility vehicle - Road registered and ideal for farming, equestrian or large estates - Powerful 963cc V-Twin fuel-injected petrol engine - Automatic CVTech CVT transmission - Selectable 2WD/4WD with differential lock - Electronic Power Steering (EPS) - Reg: FV23 OME - Full cab - Large hydraulic-assisted tipping cargo bed - Three-seat bench - Front electric winch - Tow hitch and trailer socket - Allow wheels - Front and rear tyres in good condition - Independent suspension - Digital Dashboard - LED lighting - One previous owner - Has been serviced regularly - V5C present - Lights and brakes working

REG: WA60 AEE - C/w V5 - 4WD & Diff lock - Road registered - Lights & brakes working - Automatic gearbox - Diesel - C/w tow hitch - Damage to plastic front left wing (see photo) - Manual rear tipping body

Spares or repair - Reg: WJ65 FLK - 1 previous owner - C/w V5C - 21,816 miles - 3900 hours (Previously stated 3700 hours. Vendor corrected this 5th October) - Agri registered - C/w power steering - Lights working - Brakes not working - Automatic gearbox - Diesel - C/w tow hitch - Starts, runs and drives - Handbrake working - Brakes and 4wd need attention

3000 hours - Electro hydraulic bed tip - Diff lock - Twin cylinder petrol engine - Tail gate does not latch anymore and seats are tatty - Not road registered - Mechanically working fine - Drive belt new last year - Starts on the button - 2 keys

2008 hours - Manual gearbox - V5 present - 2WD & 4WD - Seat needs recovering - Plastics need fixing - Not been used for 12 months

Petrol - Electric start - Starts, runs & drives - Rear plastic cracked

Only 947 hours, clock working - 6060 miles - Power steering - 4WD with diff lock - Automatic gearbox - Good tyres all round - Has ball hitch and trailer socket - Manual tip body - Good condition with everything working as it should - Only selling due to sale of farm - C/w V5

* Please note the location for collection is Launceston * - 1123 hours - Automatic gearbox - Fitted with winch - Good tyres - Working order

* Please note the location for collection is Launceston * - Petrol engine - 1407 hours - Automatic gearbox - Selectable 2wd & 4wd - Doors are missing windows - Some cracks to mudguards - Fitted with winch

Starts, runs & drives but gearbox is noisy when you let off the throttle - Goes through all gears and reverse - Brakes working fine including the foot brake - Has good wheels & tyres all round - Good solid seat with no rips - Has front and rear racks

Marked 33 - Reg: WA70 DTV - 10,472 miles on clock - 2,327 hours on clock - Petrol - C/w homemade front mesh carrier box - Please note the power steering is not bearing - Good tread on tyres - Good working order apart from power steering - C/w V5C - Serviced in April by Ark ATV - This lot is part of a genuine dispersal, the vendor having relinquished his farm tenancy

Not Registered - Hours & miles cannot be given as LCD display does not work - Vendor has owned bike for 7 years & only selling due to buying a newer bike - Starts & runs well - C/w heated hand grips - Please note electric start does not work so only starts on the pull start. When the bike was serviced the engineer said it was the slip ping that the starter fits into that was faulty - Please note the bike weaps a very small amount of oil and the auto gear change does not work but gears work well on the manual 'tiptronic' style on the handle bars - Has been regularly serviced

2514 Hours - Selectable 2WD & 4WD - Automatic - Manual Tip Body - Full Cab - Good Working Order - Good Tyres

2994 Hours on clock - Selectable 2WD & 4WD - Automatic - Manual Tip - Runs & Drives - Some Corrosion

One was running when last used, the other is a non-runner for spares or repair

3490 Hours - Brakes & Lights working - Recent Oil Change - No V5C or registration - Petrol - 4WD - Tyres reasonably good - Front brakes require bleeding / attention

Serial No: RFRSM502YMM050959 - Not road registered - Brakes and lights working - Automatic gearbox - Petrol - 100cc - All tyres have 90% tread - Good condition - Barely been ridden

Combination table saw, spindle moulder, planer thicknesser, mortising & jointing unit - 240v/ single phase - C/w framework/guides & brackets - Vendor purchased to complete windows on house initially several years ago and since then it has been retained for hobby/home use only - Purchaser will need to bring people power/ lifting assistance or co-ordinate with vendors regarding collection - C/w user manual - Tooling & items from the same location are lotted at Lot 4934, 3935, 4936, 4937, 4938, 4939, 4940, 4941, 4942, 4943.

Used - Has been dismantled - 20M x 10M - Steelwork, glass, nets and floor included - Manufacturer is Unisport

Pitch Pine & hard Maple - Consists of 29 sections ranging from 4'5'' - 8' long - All are approximately 42'' wide - Access is restricted but can be brought out to meet a larger vehicle - Please see photographs of a table which the vendor made from one section - Table is not included - Very heavy & no forklift.

Serial No: 16126 K1 - Capable of producing 0.5 megawatts - Complete system which includes heat exchanger pressure vessel with booster pump, all pipework, intake system, boiler and hot water tank - Sensors on feed intake system to regulate amount going into boiler - 3 phase - Easy to take out of building as on a skid unit which is 3.8m wide - Boiler system had a major service and has not done 200 hours since - Boiler system was last run regularly to dry grain and was used to dry woodchip commercially - Please note the fans and drying floors are not included - Good working order and viewings recommended

Serial No: 16126 K2 - Capable of producing 0.5megawatts - Complete system which includes heat exchanger, pressure vessel with booster pump, all pipe work, intake system, boiler and hot water tank - Sensors on feed intake system to regulate amount going into boiler - 3 phase - Easy to take out of building as on a skid unit which is 3.8m wide - Boiler system had a major service and has not done 200 hours since - Boiler system was last run regularly to dry grain and was used to dry wood chip commercially - Please note the fans and drying floors are not included - Good working order and viewings recommended

Working order but does require 1 new cable on controls - Mounted machine - Swivel shute

Serial No: B11626 - Head working width 1.2 - Maximum reach 5.7m - PTO - Electric joy stick - Lights working - 3 point linkage - T flails - 1 owner from new - Loading is available with telehandler on site - Farmer owned since new - Done approx 250 acres a year - Regularly greased - Selling due to upgrade to larger machine

C/w PTO shaft - Brakes and lights working - Tyres have good tread - Holding air but perished - Hydraulic door (no rust on ram) - Auger and tub in good condition - Agitator missing - Working order

C/w PTO - Nylon conditioner tines - Barn stored - Not be used for a number of years - Hydraulic fold around - Blades would benefit from being changed - Hydraulic pipes perished - Skirt in good condition

New tyres - All tines present & good condition - C/w control box

Serial Number: 4087 - In good working order - Imported from the US and installed in 2019 and used for sand recovery from dairy manure until 2025 - Supplied with replacement secondary auger outer housing as per picture and motor (0.75kw 3Ph) and screen for secondary auger is not fitted but included and is displayed in separate picture from the main frame. - Comes principally in 2 units, the main carrier frame with motor (2.2kw 3Ph) and main bearings and secondary auger fitted while the the main auger has been seperated for transport - The auger looks in good condition for age but some welding on the bottom flight would be advisable before installation - Was in good working order when last used, last summer - Feel free to call for more information. https://www.daritech.com/

Serial Number: 2123 - in good working order - Imported from the US and installed in 2019 - Daritech DT360, purchased new from importer in 2019. The mesh was replaced in approx 2023 - Motor (0.75KW 3Ph) and gear box all in good working order when last used in summer 2025. - Dt360 is a well regarded dewatering piece of equipment. All stainless steel. - Feel free to call for more information. https://www.daritech.com/products/manure-management/

Serial Number: 3406 - In good working order, 2015 model purchased ex demo and commissioned in 2019 and used up until summer 2025 - Comes with 1 reconditioned roller and another used roller as per picture - This piece of equipment is typically used in tandem with a DT360 to achieve low to mid 30% DM stackable solids - Feel free to call for more information.

Sand rake with Manitou brackets to level sand cubicle beds - Hardly been used

2004 Keenan Klassik 170 Feeder Wagon - Spares or repair - Bought in working order a few years ago but never used by present owner - Lights need attention - One flat tyre and one holding air - No PTO shaft - Lots of good parts

Age unknown - 750mm wrap size - Nice simple wrapper - C/w cable controls - Mechanical knife - Electric counter (not original) - Bale count unknown - 4 new turn table belts last year - One new tyre last year - Used this season

Year unknown - PTO shaft - Lights not working and brakes untested - Rotor blades need replacing - Spreader in good working order - Comes with agitator

Fitted with hopper extension, hydraulic crane - Weight cell system - Boarder control - Amatron 3 electric control box - 18 mtr-24mtr disc's fitted - C/w PTO shaft - Not be used for 4 months - Selling due to upgrade - Holds 4 bags comfortably

Amazone ZA-M Maxis fertiliser spreader - Twin disc - C/w hopper extension and boarder control - Set up to 12 metre spread width - Been oiled up and put away indoors - Lights present but not tested

DR4204R - Last used in 2025 - Please note no PTO is with this machine - Capable of 4 different functions being: spreading, tedding, side raking and centre raking - This lot is part of an unreserved genuine dispersal to dissolve a partnership.

Spares or repairs - One star needs new hood on top of star - C/w PTO - Last used in 2025 - This lot is part of an unreserved genuine dispersal to dissolve a partnership.

Fitted with 2014 Pichon Rampe 12m dribble bar - Self loading arm - Good tyres 650/65 R30.5 - Galvanised tank - Fitted slope control kit and weight transfer - Holds 3,500 gallon approx - Hydraulic brakes and air - Lights present - Rear steer - 80mm ball hitch - 13,800L/min 1000rpm vacuum pump - Has had very little use

2018 Chapman machinery RM120 rotary mower - Owned from new - Starts, runs and works as should - Used recently - Right hand tyre slowly loses air otherwise holds air fine - Has had little use - Honda GXV 390 engine

Independent oil tank and pump - Hydraulic legs - 2 buckets (16'' and 12'' with ejector)

PTO driven - Used last year - Working order - C/w 4 way splitter - C/w 38cm long saw blade - C/w Hakke Pilke log table which has had little use but has a bent support frame - Log table is approx 7' wide X 8' long - This lot is part of an unreserved genuine dispersal to dissolve a partnership.

Really strong and well made tool - No PTO Shaft, used as normal subsoiler - One owner from new - Knock on feet - For sale due to change in farming practise (now practising low disturbance).

Brand new and never used - Still clean, no wear on flails/housing - 800mm cut width Y flails - 40mm pin hitch for 2-4T mini digger - Dual pin brackets fitted - Hydraulic motor and hoses included - Ready to bolt on and work - Head working width 800mm - No PTO shaft - Service history from new - No faults

Used this year - Good working order - Only being sold as vendor has bought a twin rotor rake - All tines present - C/w PTO

Pottinger Faro 3500 Rotomatic Forage Wagon - Bought new on farm - Only used on one farm - Used this year - Working order - Only being sold as no longer zero graze - Flotation tyres (19.0/45-17) - C/w full set of blades and part spare set - 1.9m pick up - Good floor and solid back door - Generally dry stored

Bought as ex demo on farm - 10,347 bales on bale count - C/w control box - Only being sold as farm now using contractor - Used this year - Good working order - Used for grass and straw - 13 knives - Recent new main chain put in (old chain is a spare) - New chain has only done approx 200 bales - Auto lube - 6' pick up - PTO

Serial No: 000048955 - 4 new wearing points included - 3m working width - Instruction manual - Spare parts manual - Telehandler available for loading

Unknown year - Very tidy and fully working - Working width 4.6m - Includes LED lights - Hydraulic folding - No known faults Telehandler available for loading

Home made solid frame with flexicoil packer - 5 McConnel Shakerator legs with knock on points - Working width 2.5m - No known faults - Telehandler available for loading

Suit quad bike or compact tractor - Kawasaki FA210 engine - Tyres holding air - Bought 12 months ago & never used - Was working when purchased - Engine starts & runs - 3 pick up

UPDATED INFORMATION - THIS LOT IS BEING SOLD WITH NO VAT CHARGEABLE - Good working order - SN: 06-10042 - Always barn stored - C/w extended log guide, new PTO shaft - Blade in good order - Believe to be a 2008 model, 540 PTO - Good little machine

Both full - Bungs present - Bearings ok - Framework solid - Can be loaded for purchaser if required - Viewings & Enquiries welcome

Cat 2 - Requires a min 40hp to operate - 1.4m working width - SN: 202100525026 - C/w PTO - Loading available - Has had little use

Swivel shoot - Electric controls - 2 speed gearbox - One farm from new - Runs nicely, as shown in video - Loading available

SN: 74901178 - C/w control box - C/w PTO shaft - Good working order - Used this season 2026 - Made 500 round bales - New roller bearing start of season - Serviced by main dealer

SN: 3476003 - Good working order but will need new knives or use as it is

Hydraulic front disc adjustment - Hydraulic rear roller - Auto Reset Legs - 6 leg - Good wearing metal left - Hydraulic pipes in good condition

Working order but needs to be re-lined on rear right hand side

Trailed Teagle Tomahawk Straw Chopper - Lights working - Swivel shute - Remote control/bluetooth controls with everything working as it should - Tyres in very good condition - One previous owner - Had little work over last 3 years - Straight PTO - C/w manual

All in working order - Tyres like new - Rollers are full but can be emptied - Has filling bungs - Loading available

C/w additive pump and mineral hopper - High output machine - Good working order - C/w PTO shaft - Lights working - Mechanical loading available - Maximum lorry size access available

Serial No: 025995 - C/w control box - Adjustable rate - Wheel eradicators - Hydraulic packer adjustment - Pre emergence markers - Following harrows - Low level tank sensor - 1000RPM gearbox - Always barn stored - Sprayed with oil each year - Bout markers - Lots of metal left on Kverneland tines - C/w operator book (as pictured) - Has some spares - Lights and PTO working - Vendor owned for over 20 years - Loading available

Unused and like new - Serial No: 2404102 - C/w extras in the form of calibration hopper and 1 outlet rotor meter 5mm seed roller kit (for fine seed) - C/w control box

Serial No: EUII1460C4637 - 14 cubic meters capacity - C/w PTO shaft - Lights untested - Working electric weigh display - Blades are well worn, no holes in auger - Tyres worn and may need attention before driving away however holding air - Mixes pit silage well, ability to feed out both sides, original condition - The right hand elevator needs a new motor and possibly a belt

Conventional baler - Serial no. 3937 - C/w PTO shaft - No control box - Baled 1500 bales, rarely missed a knot - Mechanical loading available - Maximum 45' lorry access available.

Conventional baler - C/w PTO shaft - Serial No. 3836 - Fully serviced & knotters fully serviced - Recent invoice to prove this work - Good working baler - Mechanical loading available - Maximum 45' lorry access available.

Tyres holding air - One owner from new - C/w PTO shaft - All tines present - C/w prop - Previous weld repair on one pivot as pictured but still functions - Hydraulic folding - One pin need re-lining/bushing and pictured

In good working order - Not done much work - Full guarded PTO - Solid deck with NO holes - Good blades all present - All four wheels work work fine and move freely - Comes with brand new mulching kit to make it mulch the grass if you wanted it to - Comes with spare side panel and 2 wheels and arms (1 new ) - Good straight mower ready to work

2.45M Cutting width - hydraulic side shift - c/w rear roller

4m working width - Hydraulic folding - Road lights - Ridge packer

2015 Dowdeswell 145 series MA 8 furrow Reversible Plough - ON land and in furrow - Manual vari-width - Rear disc - Depth and transport wheel

16HP V Twin Briggs and Stratton engine - Pull and key start - Recent new tyres - Very simple to adjust - 43'' cut - Off-set facility - Very little use - Surplus to requirements

Marked 1 - Used for less than 100 loads since new - 1 owner from new - C/w PTO shaft - Hydraulic lid - Tyres with good tread - Lights working - Paint still in barrel and on lip - Good paint & flails - Dry stored - This lot is part of a genuine dispersal due to bereavement. All lots are available to view & collect by appointment with the vendors.

Marked 2 - C/w 2 hopper extensions - C/w PTO shaft - C/w roll-over cover - Lights present - 18m-24m, headland shut-off - Dry stored - No rust - This lot is part of a genuine dispersal due to bereavement. All lots are available to view & collect by appointment with the vendors.

Cable controls - 3 point linkage - Good condition - F10H flails on 1.2m head - Used last season - Working order when parked up - PTO present but cover damaged - Transport lock missing

Pneumatic DL - C/w disc markers - Pipe work appears in good order - C/w PTO - Tyres have good tread and holding air - 3 point linkage or A frame mounted - C/w ESC control box - Hopper solid - Used last year - Barn stored

Pigtail tines (all present) - Depth wheels missing bar one - Manual fold - 9' folded - 13' working width - Useable condition

Galvanised frame - Rubber good - Has a weld on frame - 2m wide

Piggy back pneumatic DA Drill - C/w lights (untested) - Hydraulic bout markers - Electric box - With stands