IMPORTANT NOTICE TO PURCHASERS - PLEASE READ 10 lots close per minute from 7pm on Sunday with bidding extension activated, meaning if a lot receives a bid in the last five minutes of its closing time, the lot will automatically extend for a further five minutes to allow other bidders a chance to bid again if they wish; this can happen repeatedly. WEB BROWSER & BIDDING: Please place bids in good time and do not leave until the very last moment, in particular if you are bidding on multiple lots. Please use either Google Chrome or Firefox as your preferred browser for optimum display and responsiveness. Please always refresh the page when watching items count down - also ensure your 'cache' is clear and not displaying outdated information. The auctioneers or their software providers will not be held liable for any interruptions with bidding during our auctions.

For assistance on how to navigate our online bidding system, click here - https://www.stags.co.uk/pages/online-bidding-tutorials Should you have any questions relating to online bidding, or any points raised in the videos, please contact one of our team on 01769 572042.

Charged on all lots. Buyer’s premium is 10% per lot capped at £250 + VAT per lot (£300). Subject to a minimum charge of £2.00 per lot. Example 1 - £10,000 non-VAT tractor + £250 buyer’s premium & £50 VAT. Example 2 - 5 non-VAT lots all costing £200 (£1000 total) + £100 buyer’s premium & £20 VAT.

Click Here for Details

Reg: WJ63 VZC - V5 present - 4072 hours owned from new - Starts, runs and drives - Power quad gearbox - Lights working - Vredestein tyres/holding air - Rear tyres: 16.9 R34 95% tread - Front tyres: 340/85 R24 35% tread - Recent new clutch - Pick up hitch - 2 double spool valves - Air conditioned - Beacon - Radio - C/w Chiltern MXU8 power loader - Joystick controls and 3rd line - Patchwork black box GPS system included

4606hrs (genuine hours) - V5 present - Owned from 1986 - REG: VHG 736V - New clutch 3 years ago at 4580hrs - Hydraulics overhauled a few years ago - New cooling system - Tyres holding air - Rear tyres: 13.6 R38, approx 80% tread, some perishing - Front tyres: 250/85 R24, approx 90% tread - Double spool valves - Pick up hitch & draw bar - Starts, runs & drives - Very tidy for year - Little use - One door glass has been replaced with perspex sheet - Cab roof replaced - Most lights working

Reg: KVE 595P - V5 on sorn - 5649 hours on clock (unverified) - Starts, runs and drives - Owned for the last 15 years - Only used on a straw chopper - Hydraulics and PTO working - Rot on cab and wings - No rear window - Tyres show some perishing - Rear tyres 13.6/12-38 40% tread - Drawbar - no pickup hitch - No rear lights - Top link

V5C present - Reg: TAD 284 - Tyres holding air with some perishing - 12.4/11-36 - Starts, runs and drives - Roll bar - Belt pulley and draw bar - C/w loader and muck fork (converted to twin bale spike) - Barn stored - Not been used for the last 2 years - New battery 12 months ago - Some rust to tin work

No V5 - Not road registered - Starts, runs & drives - 1 Spool valve - Roll over frame - Tyres holding air - Rear tyres: 8.3-24, approx 80% tread - Front tyres: 6.0.12, approx 80% tread - Recent new battery - C/w drawbar, power steering - 2 front weights & rear wheel weights - C/w McConnel Rhino Topper (SE4) - Recent new PTO shaft - Has been in use recently - Very tight access, no lorries

Spares or repairs - 8464 hours - Power steering - Good rear tyres - Non runner - Unknown condition - No V5 - No door or rear windows - Missing mirrors

Reg: D589 NAT - V5 present - 4195 hours - 5 speed - Centerline GPS system - C/w Horstine granular applicator - Engine driven fan - Land wheel

5t machine - 1873 hours - Fitted with hydraulic quick hitch - Rubber tracks, done less than 200 hours - Pipes for hydraulic 3rd service - C/w grading bucket, 3' digging bucket & 1' digging bucket

46752KM on clock - Reg: DG53 FYN - No MOT - Day cab - 360hp - Rear Steer & lifting axle - air suspension - 26' curtain side body with aluminium floor - 5.5m wheelbase - brackets for rear mounted Moffet Mount forklift - Lrg Aluminium side lockers - ex fire brigade so well maintained - automatic - C/w V5

Reg: WJ58 FPN - C/w V5C - 46,284 miles on clock (will increase slightly as still in use) - 4WD - Manual gearbox - Diesel - MOT until 03/09/2027 - C/w tow hitch - Lights and brakes working - 2.5L engine - 1 front tyre has 50% tread and the other is an MOT advisory (tyre worn close to legal limit/worn on edge, offside front inner edge) - Rear tyres both have 50% tread - Bodywork good for age, has a few scratches and minor dents - Seats have been protected by seat covers and floor has been protected by rubber mats since new - Vendor has owned from new - Manual included - C/w service history book (completed until 2022) - C/w Ifor Williams canopy - Ford protection liner in back - Glove compartment cover needs to be lifted onto its hinge when closing

Reg: 471 KYC - V5C present - 63,110 miles (believed genuine) - Diesel engine - Tyres holding air and good tread - Spare wheel - Original condition - Age related scuffs - Starts, runs and drives - Recent new starter and alternator - Hard top back - C/ frame and panel to make truck cab - Some damage to seat vinyl - Viewings welcome - C/w collection of spares to include radiator wing and headlight panel and doors

First registered in October 2001 - Reg No: VK51 XNJ - 161800 miles - Engine size 3.0 - V5 present - Manual gearbox - MOT: 20/1/2027 - Diesel - Lights and brakes working - Tow hitch

12 Months MOT (23.01.2027) - Reg: BN54 LHP - Diesel - Lights and brakes work - Manual - Good tyres - One bump on the left side as seen in photos - Side and rear loading

Electric start - 2 stage mapping - Dunlop tyres - WP suspension - Renthal twin wall handlebars with Renthal lock on grip - Recent service and top end - Only done 92.5 hours - Working order - 2 stroke

4 previous owners - Automatic gear box - Two hitch - Diff lock - Engine size 400cc - Lights and brakes work - Could do with a set of brake pads - Front and rear tyres are in good condition - It was serviced at the beginning of the year, having hydraulic and engine oil and coolant - Has had a new clutch and belt - Brand new rear prop shaft - All the parts are brand new - C/w service manual - Has a cage on the back and a game carrier - Has a folding table at the front, which is good for a shooting rest - It also has a winch and towbar

C/w trailer & tow hitch - 3 previous owners - Agri registered - Lights & brakes working - Automatic gearbox - Diesel - Front & rear tyres in good condition - Serviced yearly - Works fine, selling due to no longer needed

Combination table saw, spindle moulder, planer thicknesser, mortising & jointing unit - 240v/ single phase - C/w framework/guides & brackets - Vendor purchased to complete windows on house initially several years ago and since then it has been retained for hobby/home use only - Purchaser will need to bring people power/ lifting assistance or co-ordinate with vendors regarding collection - C/w user manual - Tooling & items from the same location are lotted at Lot 4934, 3935, 4936, 4937, 4938, 4939, 4940, 4941, 4942, 4943.

Used - Has been dismantled

Working order but does require 1 new cable on controls - Mounted machine - Swivel shute

Tyres holding air - All tines present - Good working order - Used this season - PTO guard intact - Had new bearings a while ago - Little use since

PTO intact - Used this season - Ready to go - Hydraulic folding - Skirts all good - Bed refurbished 3 years - Little use since

Serial Number: 4087 - In good working order - Imported from the US and installed in 2019 and used for sand recovery from dairy manure until 2025 - Supplied with replacement secondary auger outer housing as per picture and motor (0.75kw 3Ph) and screen for secondary auger is not fitted but included and is displayed in separate picture from the main frame. - Comes principally in 2 units, the main carrier frame with motor (2.2kw 3Ph) and main bearings and secondary auger fitted while the the main auger has been seperated for transport - The auger looks in good condition for age but some welding on the bottom flight would be advisable before installation - Was in good working order when last used, last summer - Feel free to call for more information. https://www.daritech.com/

Serial Number: 2123 - in good working order - Imported from the US and installed in 2019 - Daritech DT360, purchased new from importer in 2019. The mesh was replaced in approx 2023 - Motor (0.75KW 3Ph) and gear box all in good working order when last used in summer 2025. - Dt360 is a well regarded dewatering piece of equipment. All stainless steel. - Feel free to call for more information. https://www.daritech.com/products/manure-management/

Serial Number: 3406 - In good working order, 2015 model purchased ex demo and commissioned in 2019 and used up until summer 2025 - Comes with 1 reconditioned roller and another used roller as per picture - This piece of equipment is typically used in tandem with a DT360 to achieve low to mid 30% DM stackable solids - Feel free to call for more information.

Sand rake with Manitou brackets to level sand cubicle beds - Hardly been used

2.45M Cutting width - hydraulic side shift - c/w rear roller

4m working width - Hydraulic folding - Road lights - Ridge packer

2015 Dowdeswell 145 series MA 8 furrow Reversible Plough - ON land and in furrow - Manual vari-width - Rear disc - Depth and transport wheel

New PTO guard recently - Spare tips & star joints - 12'' auger - Spare auger included

3 point linkage mounted - 6'6'' wide - Good rubbers

3 point linkage mounted - PTO shaft requires new guard - Working when last used

Tines all present - Tyres holding air - PTO intact - Usable condition

Spiral log splitter with PTO shaft - Working when last used in the Winter

Manual boom fold - 12m width - Hydraulic lift - self levelling - Induction/wash tank - 1000L capacity - Lights untested - Electric control box - PTO guard intact - Usable condition

240v - Working order when last used - Flat belt - Has been used to fill log trailer - Approx 8' elevation - Spare belt included

Single furrow turnover plough - Been used as garden ornament

C/W rear gates and PTO shaft (needs new guard) - Would need approx 10 new tines - Some perishing to tyres

Tyres holding air, some perishing - PTO guard intact - All tines present - Both gates present - Working order

Working order - Would benefit with replacement brushes

Owned from new, approx 10 years old - Working order - Barn stored - Tyres holding air - Jack legs - Hydraulics in working order - Used until recently - Crane will detach & fit on 3 point linkage

Thought to be 10 tonne capacity - Auto door (has some plating to anchor point) - Lights and hydraulic brakes present - untested - Tyres holding air - New seals in rams recently - Floor sound

12 x 6 - C/w front & rear lade - Weld mesh floor - Tyres old but holding air

Carries 3t - Tyres holding air (some perishing) - Useable condition - Bed is 12' long - Telegraph poles not included

With Botex 360 Loader - 12' long - 10T carrying capacity - Lights present and working - Brakes working - Tyres in good condition - No leaks and all working - Being sold as no longer needed

Approx measurements - Used as site hut but no longer needed - Solid and water tight - Window shutters, electrics with one striplight an sockets which work a bit but not PAT tested - No key for the door but can be locked with a padlock (not provided) - Can load but no artic access - Will be empty before collection

Beautiful handmade shepherds hut - Just finished and ready to use - 2.59m wide - 3m long - On new chassis with turntable

Good condition - Tail gate

Quickie brackets - Tines all present - Some rust holes

Quickie brackets - Lots of rust holes

5'3'' wide - Sound floor - Chiltern brackets - Good condition

4' 7'' wide frame - Spikes 34'' long - Chiltern brackets

4'2'' wide - Chiltern brackets - Good condition - Used recently - All tines and cutters presenty

Chiltern brackets - 2008 - Some perishing on pipework - All tines present - Some cutters broken off - Still usable if cutters repaired

Good order - Straight tines - Pin and cone brackets (Matbro) - Very strong

Home made - Very strong - Matbro pin and cone brackets - Middle sleeve for extra spike - Working order

Suitable for MF135 or similar - Loader boom - Heavy duty bale spike - Concrete weight block - Mechanical loading can be arranged but vendor requires a few days notice to organise

Little work

Good condition

Spares or Repairs - Oil drum filled with concrete - 3 point linkage - Would benefit from a new bar

Vintage - C/w original clipper head - Additional clipper head - Cast iron frame on wooden stand with toolbox - Very original - Working order - C/w spare blades

Approx 5 years old - Very good condition - C/w combi clamp & weighing/shedding crate - Draft pro crate, c/w electric box - 16 solid 8' galvanised sections - 6 curved sections - 1 shedding guilotine gate - 2 opening 'slider' gates - 2 solid 4' galvanised sections - Foot bath section & sides, apporx 8' 6'' long - Including: 6 x 8' sheep hurdles & pins, 10 x 4' sheep hurdles & pins & bucket holders - 3 hay racks - One-way gate - Will be dismantled before collection

Marked as 1 - 5' 4'' diameter x 3' high - C/w pins - Good condition (but one broken rail)

Marked as 2 - 5'4''' diameter x 3' high - C/w pins - Good condition

Galvanised - Good condition - Little use

Only 5 years old - Little use - Two fill pipes - Holds xxxx tonnes - 3 leg - 8ft between each - Buyer to remove - No loading available - Access good

Holds approx 2000l - Needs new ball valve

Galvanised - Side opening - Strap - New floor and matting last year - Good condition

Marked 1 - Good condition - Drinking bucket included

Marked 2 - Good condition - Drinking bucket included

Marked 3 - Good condition - Drinking bucket included

Marked 4 - Good condition - Drinking bucket included

Marked 5 - Good condition - Drinking bucket included

Marked 6 - Good condition - Drinking bucket included

Marked 7 - Good condition - Drinking bucket included

Approx 7'6'' diameter x 26'' skirt - Needs a little work - Two tombstones missing

Side and rear opening gates - Good condition - Not had much use

2-Way shedding gate - Good condition - Working order

Backing race gate - Guillotine style - Suitable for sheep and goats - Slight repair needed to one of the lower pin eyes (see pictures)

ROUND SHEEP FEEDER

ROUND SHEEP FEEDER

ROUND SHEEP FEEDER

ROUND SHEEP FEEDER

To fit 15' bays - In good condition - Boards solid

Marked A - C/w furnishings - Top rail showing signs of age

Marked B - C/w Furnishings

Bottom half is meshed - C/w furnishing - Good condition

3 X Heavy duty stable fronts - Two locks on doors - kick lock and bolt - 10' x 8' solid wood

Spares or Repairs - Barn-stored clay pigeon launcher - Angle of launch changeable - Foot-peddle launcher - Battery connector - Does not seem to work - Working when used last year - Complete but not working at present

Wooden with galvanised front section - 9' 10'' long x 7' 3'' high x 45'' deep - Sloping onduline roof - Very good condition - Access doors to kennel and run - Built by Blackdown Buildings

Suits 13.2hh-14.2hh horse - Interchangeable seats - Brass furniture - Winding balance - Spares basket

To suit 13.2 to 14hh - Brass hames - 20'' x 10'' - Patent leather Full Collar and Brass Hames

Brass furniture - To fit 13.2 to 14hh

Full set of pony show wagon harness by Alex Marsh - Suit 12.2 pony - Top quality fine harness in show condition - Patent and black leather with sewn in traced and tail stand

Alex Marsh of Canterbury private drive set - Full set of private drive show harness - Patent and black leather with full split 16'' collar and hames, full and false britching - Alex Marsh made this delightfully fine set of gig harness for his own pony. In very good condition.

Set of pony show wagon harness by Freedman of Toronto - Suit 13.2 pony - Used by Mrs Hayden - Little used and in excellent condition

Part set (no bridle) - Full 21'' collar and hames - Black patent and leather with box keepers on britching and crupper - All in very good condition