3 point linkage - No PTO guard

6'' rollers - C/w PTO shaft and guard - Working order

For quad or compact tractor - Disc - Been dry stored - Control linkage will need freeing off - Will need minor recommissioning as it has been in dry stored for some time - Sold as seen

In frame (total width 9') - Believed Twose - Water filled (empty) - Not used for 10 years - Buyer will need to load themselves - This lot is part of a genuine dispersal on behalf of a deceased estate and the farm is being sold. - Please note that much of the machinery equipment has not been used for many years and the farm has no capability of loading heavy or large lots.

Total width 7'6'' - C/w side wheels - 3 point linkage - All tines present - This lot is part of a genuine dispersal on behalf of a deceased estate and the farm is being sold. - Please note that much of the machinery equipment has not been used for many years and the farm has no capability of loading heavy or large lots.

C/w front bar - Approx 12' width - This lot is part of a genuine dispersal on behalf of a deceased estate and the farm is being sold. - Please note that much of the machinery equipment has not been used for many years and the farm has no capability of loading heavy or large lots.

Last used 3 years ago - C/w PTO - One tine broken otherwise all present - Put away in working order - This lot is part of a genuine dispersal on behalf of a deceased estate and the farm is being sold. - Please note that much of the machinery equipment has not been used for many years and the farm has no capability of loading heavy or large lots.

Spares or repairs - Wooden frame (approx 5' wide) - 2 vintage wheels are not attached - Vintage wheels are marked 'Tucker, Hatherleigh' and 42'' diameter (mainly wooden and showing woodworm) - This lot is part of a genuine dispersal on behalf of a deceased estate and the farm is being sold. - Please note that much of the machinery equipment has not been used for many years and the farm has no capability of loading heavy or large lots.

9 legs - 3 point linkage - This lot is part of a genuine dispersal on behalf of a deceased estate and the farm is being sold. - Please note that much of the machinery equipment has not been used for many years and the farm has no capability of loading heavy or large lots.

Spares or repairs - 100 gallon tank - Engine not currently working - C/w spot spray lance

Uknown of age - Working width is 5m - Transport width is 2.77m - No damage to the frame - Al in good wokring order - Can go striaght to work - All rings complete - Loading is provided

Good working order.

Manual boom fold - 12m width - Hydraulic lift - self levelling - Induction/wash tank - 1000L capacity - Lights untested - Electric control box - PTO guard intact - Usable condition

240v - Working order when last used - Flat belt - Has been used to fill log trailer - Approx 8' elevation - Spare belt included

Single furrow turnover plough - Been used as garden ornament

C/W rear gates and PTO shaft (needs new guard) - Would need approx 10 new tines - Some perishing to tyres

Tyres holding air, some perishing - PTO guard intact - All tines present - Both gates present - Working order

Working order - Would benefit with replacement brushes

C/W PTO shaft - Good working order - Adjustable height

Working order - C/W electric motor - 13AMP - 2 flat tyres

Approx 6' long x 18'' round - iron can be removed if not wanted

Approx 5' 6'' long x 18'' round

Owned from new, approx 10 years old - Working order - Barn stored - Tyres holding air - Jack legs - Hydraulics in working order - Used until recently - Crane will detach & fit on 3 point linkage

Bale trailer/Lorry conversion - 22' bed length - Lights present & working - 9t carrying capacity (capable of carrying 14 bales of silage) - Oil brakes & working - C/w Front & rear lead - C/w strap tie downs - New floor fitted August 2026 - Tyres in average condition - C/w 2 spare wheels & a spare bale lade

New body built on - Good strong ram - Removable drop sides & tailgate

C/w front and back bale lades - Solid metal floor - Brakes and lights work - Used this summer - 12.5 - 15.3 tyres - Recently been painted

6' wide - C/w front and rear lades - Wooden floor (solid) - Tyres holding air - This lot is part of a genuine dispersal on behalf of a deceased estate and the farm is being sold. - Please note that much of the machinery equipment has not been used for many years and the farm has no capability of loading heavy or large lots.

Thought to be 10 tonne capacity - Auto door (has some plating to anchor point) - Lights and hydraulic brakes present - untested - Tyres holding air - New seals in rams recently - Floor sound

Tyres holding air - Hydraulic brakes - Very good condition for age

Double axle - Demounted body - Working order - 3point linkage mounted crane - Tyres holding air - Approx 10t capacity - Very strong - Some rust spots on rams

Tri-axle - Model: DP12053 - C/w sheep decks & cattle partition gate - Brakes working but lights need attention - This lot is part of an unreserved genuine dispersal to dissolve a partnership.

On air, recent new air tanks & bags - 2 stage ramps - Lights need attention - Tyres holding air - Wooden floor - Side strap locker - Year 2008, not plated - Removable bolsters - In recent use - Can be delivered locally at extra cost

Chequer plate floor - Rear lights present and working - Mudguards - 1 previous repair to floor - Model: 7X49MDS - C/w internal division - Number plate light damaged

12 x 6 - C/w front & rear lade - Weld mesh floor - Tyres old but holding air

Carries 3t - Tyres holding air (some perishing) - Useable condition - Bed is 12' long - Telegraph poles not included

Tank is 6' long x 5' high approx - No tap - Ring hitch - Not roadworthy - Tyres holding air, but tyres not great - Can be pushed up ramp but not lifted

One tyre flat - Lights and brakes untested - Cage sides - Body is 14' long x 5'6'' wide - Aluminium floor and ramp - Rear jacks - Has been used to move sheep around

14' - Flatbed - Owned from new - Tyres good & holding air - C/w spare wheel, never been used - Brakes & lights in working order (needs one new front light) - Photographed with extension back & lade which ARE NOT INCLUDED in the sale - Original headboard will be fitted.

Brakes in working order - Lights need attention - Tyres holding air - C/w spare wheel - 5'10'' wide x 8'2'' long - Aluminium floor - Partition - Removable roof and sides

Removed from mitsubishi canter - Very good condition - Little use - 10' 6'' long x 6' 10'' wide - Drop sides & tailgate - Hydraulic ram present (some rust spots)

20' x 8' wide - Twin axle - One stub slightly bent - Hardwood floor - Brakes & lights untested - 3 flat tyres - Contents not included

Lights and brakes present but untested - Tyres perished but holding air - Handbrake working - Serial No. 24636 - Assistance with loading available if required.

With Botex 360 Loader - 12' long - 10T carrying capacity - Lights present and working - Brakes working - Tyres in good condition - No leaks and all working - Being sold as no longer needed

C/w spare wheel and tyre (tyre very good) - No decks - C/w cattle partition - Purchased new in 2024, manufactured 2023 - C/w chequer plate mud guards - 14' tri-axle trailer - LED rear lights present and working - Open front ventilation - All tyres with reasonably good tread - Brakes working - Very tidy trailer

Approx measurements - Used as site hut but no longer needed - Solid and water tight - Window shutters, electrics with one striplight an sockets which work a bit but not PAT tested - No key for the door but can be locked with a padlock (not provided) - Can load but no artic access - Will be empty before collection

Single use - can assist with loading

Unfinished project - No doors or windows - Douglas fir timbers - Dovetailed joints - Each side is 5m long - Footprint 64m2 (approx) - Very substantial project - Viewing recommended - Could be delivered/finished at extra cost

Beautiful handmade shepherds hut - Just finished and ready to use - 2.59m wide - 3m long - On new chassis with turntable

Shower with a gas hot tap boiler & a gas bottle just attach to a water pipe and use - Used once

Good condition - Tail gate

Quickie brackets - Tines all present - Some rust holes

Quickie brackets - Lots of rust holes

5'3'' wide - Sound floor - Chiltern brackets - Good condition

4' 7'' wide frame - Spikes 34'' long - Chiltern brackets

4'2'' wide - Chiltern brackets - Good condition - Used recently - All tines and cutters presenty

Chiltern brackets - 2008 - Some perishing on pipework - All tines present - Some cutters broken off - Still usable if cutters repaired

Good order - Straight tines - Pin and cone brackets (Matbro) - Very strong

Home made - Very strong - Matbro pin and cone brackets - Middle sleeve for extra spike - Working order

6' wide - Good condition - Had little use

Came off a 2000 hour machine - C/w locking pin & ram.

Quick hitch 45mm pins - Strickland 2' bucket never been used.

New and never fitted - 2021 year - No brackets (frame only) - C/w instruction manual - Euro 8 headstock

Very tidy - Tines all present - Has had another set of brackets welded on

Brackets unknown - As new - Very little use

No brackets welded on - 2 new pipes - Pin & bushes tight - Non removable sleeves - Can be loaded

Euro 8 brackets - Removable tubes for the bale spikes - One spike has slight bend, doesn't effect use

Good condition for age - Rams in good condition with no leaks - All working as it should be - Handy bit of kit - Loading available

Six months old - 7ft width - Euro 8 bracket - Done hardly any work - No faults at all - Selling as too big for tractor

Straight and strong dunk fork - Not seen a lot of work

Useful size bucket - See the crack and small holes in the picture

Suitable for MF135 or similar - Loader boom - Heavy duty bale spike - Concrete weight block - Mechanical loading can be arranged but vendor requires a few days notice to organise

Little work

Euro 8 brackets - Max 1500kg each arm - Tidy - Surplus to requirements

Euro 8 brackets - Very good edge, had little use

On euro brackets, BRU200 - 2.0m width - As new only used a handful of times

Cat 1

Two 2 foot spikes - Tines are loose

To fit a JCB telehandler - May need new brushes

On quick fit bracket

12'' toothed bucket - 28mm pins - Used on a micro excavator

Good condition

5 weights - Marked 276-43R - Thought to fit John Deere 4020

2 wheel weights - Thought to fit John Deere 4020 - Marked A3404R

Approx 80kg each - Unknown what removed from

3 point linkage

Spares or Repairs - Oil drum filled with concrete - 3 point linkage - Would benefit from a new bar

On Euro 8 bracket and A frame - Good and strong - 2' x 2' concrete block

3 point linkage mounted - Good condition

Including holding bar

3 point linkage (damaged) - Concrete is approx 110cm wide x 40cm thick and 85cm high - This lot is part of a genuine dispersal on behalf of a deceased estate and the farm is being sold. - Please note that much of the machinery equipment has not been used for many years and the farm has no capability of loading heavy or large lots.

Parlour to include all stall work, feed troughs, gates, receiving vessel, milk pump, ADF, Dematron Milk Meters, Auto ID, Feed to Yeild Computer, ATL Feeders, Compressor & Vacuum Pump - All in good working order up to the 19th August 2026 - Already dismantled & boxed ready for a new home - Stopped using this year due to robot installation

5-6 years old - Includes wall brackets - Good condition - Removed due to robot installation

In working order

In working order

Good working order

C/w pressure control switch

C/w a nearly new control panel - Good working order

Plastic bucket with stainless steel lid & cluster