Spares or repair - Came with a compact tractor but never used - Untested

Has been used on peat processing plant - Suitable for soil - Has a rubber belt - Holds approx 6 cubic meters - In working order - C/W purpose made steps to hopper

Rubber belt - Approx 6 cubic meters - Been used for dosing peat in a peat works but would be suitable for also dosing soil - Does not have a motor

Spares or repairs - Works but 4 bent arm shafts and broken arms - All tines and tyres are good

Fitted with 24m spread discs - OM 18-24 discs - Boarder control kit - Lights present

Missing a couple of tines - Straight frame - 86'' wide - Usable condition

HCIX/W - Good working order

For fitting water pipe and aerating soil believed to be a David Brown

Tyres holding air - last used 3-4 years ago - string only - not used or ran up but parked up after last use, likely to need some attention/TLC - some corrosion and rust in places - Cannot be loaded onto lorry or similar

Spares or Repairs - Supa-Pac - 2 flat tyres - cables need attention - front box jack - 1 belt visibly damaged

Spares or repairs - Tensioner on main drive chain broken but is repairable - Age unknown - Bale count unknown - Produces 4' bales - Wide pick up width (measurement unknown) - C/w control box - C/w PTO shaft - Serial No. 0711314HD.

3 metre working width - Bar tines - C/w packer roller - C/w PTO shaft (no PTO guard, uses a bit of oil) - Working order - Set of unused tines to go with it. - Assistance with loading available.

Spares or repairs - Body is in good condition - Still spins freely - Needs a new set of spinner fins and a dosage flap

Working order - New pair of blades - Spins up nicely - C/w PTO guard - Usual age related marks and wear

Working order - Nearly new blades - Good body - Good wheels - Good skids - Works as it should

Lights present but missing a lens - Good tyres - Barrel looks okay - PTO shaft present - Needs new brake coupler

Flip over type - Some corrosion - Some rubber left

Spares or repairs - Been sat in yard for a couple of years - C/w 2nd Reco forager for spares

Hydraulic folding - PTO present but needs guard - Hood is holey and needs patching

Metal work looks good - 1 broken disc - Looks like all parts for 4 furrow are there

Metal work looks good - Sprung furrows - Fitted with discs

Approx 2.9M working width - Some corrosion to frame - Discs all present

Hydraulic folding - Has most of its tines - Hydraulic pipes perished

Missing PTO shaft guard - Rear gate fitted - Missing one shute flap

Approx 12' working width - Hydraulic folding - Spring tine and crumble roller combo

C/W PTO shaft - Has been used on a Massey Ferguson 35

Spreader is in working order - Headland control not working - Top hopper extension holey and would benefit from removing - No lights - Currently set for approx 20m spread - Still in use

Mounted on homemade 3 point linkage so can be put in place where needed - In working order - Last used in Winter 2025

5' working width - Working order but tin work is rusty with holes - PTO present with 3 point linkage - Last used 5-6 years ago - Missing one wheel

Working order - Last used in 2025 - Approx 20 years old - C/w PTO (no guard)

Spares or repairs - Cable control (requires new cables) - Not used recently - PTO intact - Some hydraulic pipes perished - 3 point linkage mounted - T flails - 1.3m flail head - Some pitting on rams - Rear roller

3 point linkage - Good bearings - No PTO guard

Has some tines missing

Had little use, good blade - Guide on blade - 3 point linkage - Good hydraulic pipes - Working order

C/w 2 depth wheels - Solid metalwork

Complete - Match plough

Complete - 1 weld on front disc cutter - Some corrosion as pictured on supports and lower parts of shares

PTO driven (no guard fitted) - Rotary chains - Solid tub - Working

Free and turning - Top slides to expose blade - PTO requires guard fitting before use

Cast bench - PTO driven belt drive

9 leg (some need points) - Wheels free - Solid metal

C/w PTO shaft (requires new guard) - Needs some repair to rear and side skids - 3 point linkage

Spares or repairs - Net and string - C/W control box - 5' pick up - 42,000 bales - New belts recently, done around 100 bales since being fitted - Electrics working - Lights not working - Being sold as spares or repair due to hydraulic pipe currently blown, which operates tailgate - 1 new tyre fitted recently - Believed to be 1998

C/w PTO shaft - Reasonable feet/metalwork - Corrosion on skids and rear guard - Must be collected by Friday 21st August

Half PTO present - PTO function untested and likely to need attention but could be used as static drags - Rear crumbler roller, not attached - Must be collected by Friday 21st August

C/w 3 point linkage lead frame - Some holes/corrosion in lead frame - Web tangled on one corner - Must be collected by Friday 21st August

Working order - Selling due to upgrade

14' working width - Tows well - Loading available

Spares or repairs - Not been used for a couple of years so therefore being sold as spares or repairs - Has had 2 new wheel assembles but other 2 need attention to bearings - Metal work seems solid but could do with a coat of paint - Good PTO shaft & guards - Loading available by prior arrangement with the vendor

Spares or repairs - Tyres holding air - Bed chain needs attention - Tub seems solid - Crash barrier greedy boards - No PTO shaft present - Was used earlier this year until bed stopped

Year unknown - Barn stored - Working when last used but has not been used for a number of years - PTO shaft - S/N: 0003144 - 2m cutting width - Loading available

Year unknown - Barn stored - Working when last used but has not been used for a number of years - PTO shaft - S/N: 94784 - Loading available

Wagtail - Working when last used in October 2025 - Barn stored

4m working width - Serial number unknown - No known faults - Good working order - All compete - Loading available onto trailer or similar

Land drive - One tyre holding air (one perished) - Twin disc - Very rusty

Worked fine when used last year - C/w control box and PTO shaft

Mole Valley Farmers PTO driven saw bench - In working order - C/w new belts - Has sliding table top to put the log on to the blade - Blade has all its teeth

Solid frame - On ring hitch

Spares or repair

Has 4 way knife - Serial No: 5017 - Can be tractor mounted or freestanding (e.g to power sawbench at same time)

Missing depth wheels - Approx 9'6'' wide - Some tines broken/missing

Fitted with discs - 4th disc believed to be in workshop - Some corrosion -

Fitted with 110 headstock - Slatted boards - 1 broken point and 1 missing skim body - Last used 2025

Spares or Repair - Offset topper - C/w PTO shaft - Has split hydraulic pipe - Metal work needs repair - Last used 2025

Some corrosion

Fitted with 10 feet - Some corrosion

In good working order - All tines present and correct - Good solid gates - Fully guarded pto - C/w original instruction book - 1 owner from new - Has done 20 acres a year - From a genuine retirement sale as no longer making bales

Spares or repair

Good solid set - Done very little work - Solid frame and good set of chains

C/w PTO

New Holland 274 Hayliner Conventional Baler - Working order - Done approx 1000 bales a year - Same owner for last 30 years - Selling due to upgrade - Approx 4'6'' pickup - Pickup lock needs attention - Good tyres - PTO shaft present

14' overall width

Little use - Surplus to requirements

Galvanised - Little use from new - Empty for loading

Spares or repairs - Has not been used for 2 years

C/W PTO

C/W PTO

Removable end for 3 or 4 furrow use - Hydraulic turn over - Manual cross shaft adjuster - Metal all in good order - Boards in fair condition - No frame cracks or welds - Hasnt been used for a couple of seasons due to upgrade

10' working width - Loading available - 1 broken tine - Good condition

Spares or repairs - 6' cutting width - PTO shaft - Loading available

Working order with post holder - Loading available

Fold out pigtail cultivator - New tips - Loading available

Driveway rake - Serial No: 043840 - Used once and been barn stored since - Selling on behalf of a family member

Approx 5' 2'' overall - Galvanised top - C/w PTO shaft - Only done 20 hours since new

16'' boards - C/w discs - Good metal work

MF 100 model - PTO pump is 2013 year - Would need new seals - Hydraulic pipe perished and tyres - C/w PTO shaft

No PTO shaft - Rusty in places - No visible holes - Blade turns freely

Spares or repairs

Serial number unknown - No PTO shaft - Old but working order - Tiny split in one of the rubber skirts - Loading available

All working - C/w PTO and new tyres - Can assist with loading

600L tank - No pump or pipes

Serial No: OD7403003 - Subaru Robin EH09 engine - Unknown make - Working order - Two unused rolls of wrap - Purchased second hand from Cowling Ag and used once - Now make big bales so no further use - Stored for four years and some rust - Starts and works ok

Good condition

10' working width - 11' 6'' transport width - Mainly for secondary cultivation but the video was taken after two passes in sprayed off old pasture and it has gone deep enough to follow with a power harrow for grass seed - No cracks or weld - A couple of discs need putting back on, one of which is cracked - C/w some spares - The angle adjustment is fairly seized but it still does a good job - For sale as it is not used enough - Can load

Spares or repair - C/w PTO - New belt about 1 month ago - Blades replaced fairly recently - Some corrosion on guards, belt tensioner adjuster not working/seized - Loading available

C/w packer roller - No PTO shaft - Good working order - Missing 2 teeth - Loading available

Working order - Loading available

Loading available

Working order

S/N: 200023 - PTO shaft - 1.8m cutting width - On wheels - Lightweight - Can be pushed onto trailer with ramp - Metal solid - 3 belt driven blades - C/W rear mulching chains - Had new belts in 2023, has been lightly used in the last 2 years - Bearing recently replaced