Working order - Old but usable - This lot is part of a genuine reduction sale due to the vendor having ceased potato and onion production. Any viewing welcome by appointment with the vendor.

8.5hp Briggs and Stratton engine - 33'' cut

Single furrow reversable plough - 3 point linkage mounted - Depth wheel - Barn stored - Doesn't appear to have been used

2.75m cut - Hydraulic offset and lift - Some rust on lifting ram and some damage to PTO cover - Otherwise in good condition - C/w instruction manual

Spares or repairs - Year 1993 - Serial No: cc1350/312756 - PTO shaft - Grass conditioner - 2.5 metre cutting width - Loading available onto trailer or similar

3m wide

Has been on the same farm from new - Little use - Some surface rust - PTO - Serial number: 1746 - Loading available

On the same farm since new - Little use - Some surface rust - Serial number: 988620

All works - Just had new points in the engine & new belts.

Spares or repair - Bed problem - No PTO shaft - Tin work & skirt tidy.

Working order, complete kit - Was recently removed from an 18m mounted sprayer - C/w tank, piping, electric box

Spares or repair - ZA-X 1402 Fertiliser Spreader - PTO intact - Tidy order - Has a problem with one side hydraulic shut off but working otherwise - Barn stored

Corrosion on mounting bracket for rubber - Solid linkage framework

6' Roller in 6'8'' frame - Blocks may need attention on ends - Solid framework - Can be loaded for buyer

Working when last used 2-3 years ago - C/w PTO shaft - Good blades - Bowed front edge as pictured but has been used like it since many times

Lead bar is corroded and needs repair - Some faults

C/w PTO shaft - C/w 3 spare blades/feet - Dry stored - Working order

4m working width

Tyres holding air, some perishing - PTO guard intact - All tines present - Both gates present - Working order

Working order - Would benefit with replacement brushes

Full of water

PTO complete - Working order - Hydraulic shut off - C/w rain cover and extension hopper - Barn stored

Approx 6' long x 18'' round - iron can be removed if not wanted

Approx 5' 6'' long x 18'' round

Model number is AM136/1 - Believed to be 36KVA - C/w PTO shaft - Believed to be working

Pin hitch - Some surface rust

Not worn, had very little use ploughing peat land - Had in ownership over 30 years - All mouldboards have no wear - Good example

Not worn, had very little use ploughing peat land - Vendor has owned for last 30 years - All mouldboards have no wear - Good exmaple

Vendor has owned for 25 years - Working order just used occasionally for bouting up peat - Nice vintage equipment - To shape and rebuild soil ridges for crops - Row widths can be altered to match varying crop requirements

Serial No: 14017 - Has hydraulic shut off - 3,000L capacity - Disc spreader - In working order - S4 discs (24m) - C/w headland board

Approx 4m conveyor belt with motor - Worked when taken out - 3 phase

C/W rear gates and PTO shaft (needs new guard) - Would need approx 10 new tines - Some perishing to tyres

Can be loaded - May be seized -

Spares or repair - Came with a compact tractor but never used - Untested

Has been used on peat processing plant - Suitable for soil - Has a rubber belt - Holds approx 6 cubic meters - In working order - C/W purpose made steps to hopper

Rubber belt - Approx 6 cubic meters - Been used for dosing peat in a peat works but would be suitable for also dosing soil - Does not have a motor

Spares or repairs - Works but 4 bent arm shafts and broken arms - All tines and tyres are good

Fitted with 24m spread discs - OM 18-24 discs - Boarder control kit - Lights present

Missing a couple of tines - Straight frame - 86'' wide - Usable condition

Solid machine - Was bought new to top pasture on a smallholding - Always kept undercover - 6' working width - C/W PTO

HCIX/W - Good working order

For fitting water pipe and aerating soil believed to be a David Brown

Tyres holding air - last used 3-4 years ago - string only - not used or ran up but parked up after last use, likely to need some attention/TLC - some corrosion and rust in places - Cannot be loaded onto lorry or similar

Spares or Repairs - Supa-Pac - 2 flat tyres - cables need attention - front box jack - 1 belt visibly damaged

Spares or repairs - Tensioner on main drive chain broken but is repairable - Age unknown - Bale count unknown - Produces 4' bales - Wide pick up width (measurement unknown) - C/w control box - C/w PTO shaft - Serial No. 0711314HD.

3 metre working width - Bar tines - C/w packer roller - C/w PTO shaft (no PTO guard, uses a bit of oil) - Working order - Set of unused tines to go with it. - Assistance with loading available.

Spares or repairs - Body is in good condition - Still spins freely - Needs a new set of spinner fins and a dosage flap

Working order - New pair of blades - Spins up nicely - C/w PTO guard - Usual age related marks and wear

Working order - Nearly new blades - Good body - Good wheels - Good skids - Works as it should

Lights present but missing a lens - Good tyres - Barrel looks okay - PTO shaft present - Needs new brake coupler

C/w Manitou brackets - Has had 1 new hydraulic pipe - Top has been repaired but has cracked again

Flip over type - Some corrosion - Some rubber left

Spares or repairs - Been sat in yard for a couple of years - C/w 2nd Reco forager for spares

Hydraulic folding - PTO present but needs guard - Hood is holey and needs patching

Metal work looks good - 1 broken disc - Look like all parts for 4 furrow are there

Metal work looks good - Spung furrows - Fitted with discs

Approx 2.9M working width - Some corrosion to frame - Discs all present

Hydraulic folding - Has most of its lines - Hydraulic pipes perished

Missing PTO shaft guard - Rear gate fitted - Missing one shute flap

Approx 12' working width - Hydraulic folding - Spring tine and crumble roller combo

C/W PTO shaft - Has been used on a Massey Ferguson 35

Spreader is in working order - Headland control not working - Top hopper extension holey and would benefit fro removing - No lights - Currently set for approx 20m spread - Still in use

Mounted on homemade 3 point linkage so can be put in place where needed - In working order - Last used in Winter 2025

5' working width - Working order but tin work is rusty with holes - PTO present with 3 point linkage - Last used 5-6 years ago - Missing one wheel

Working order - Last used in 2025 - Approx 20 years old - C/w PTO (no guard)

C/w PTO - Gates in good condition - Odd tine missing but does come with spares - Only done a few acres each year - Not been used for last 3 years - 1 tyre soft

Spares or repairs - Cable control (requires new cables) - Not used recently - PTO intact - Some hydraulic pipes perished - 3 point linkage mounted - T flails - 1.3m flail head - Some pitting on rams - Rear roller

3 point linkage - Good bearings - No PTO guard

Has some tines missing

Had little use, good blade - Guide on blade - 3 point linkage - Good hydraulic pipes - Working order

C/w 2 depth wheels - Solid metalwork

Complete - Match plough

Complete - 1 weld on front disc cutter - Some corrosion as pictured on supports and lower parts of shares

PTO driven (no guard fitted) - Rotary chains - Solid tub - Working

Free and turning - Top slides to expose blade - PTO requires guard fitting before use

Cast bench - PTO driven belt drive

9 leg (some need points) - Wheels free - Solid metal

C/w PTO shaft (requires new guard) - Needs some repair to rear and side skids - 3 point linkage

Spares or repairs - Net and string - C/W control box - 5' pick up - 42,000 bales - New belts recently, done around 100 bales since being fitted - Electrics working - Lights not working - Being sold as spares or repair due to hydraulic pipe currently blown, which operates tailgate - 1 new tyre fitted recently - Believed to be 1998

C/w PTO shaft - Reasonable feet/metalwork - Corrosion or skids and rear guard - Must be collected by Friday 21st August

Half PTO present - PTO function untested and likely to need attention but could be used as static drags - Rear crumbler roller, not attached - Must be collected by Friday 21st August

C/w 3 point linkage lead frame - Some holes/corrosion in lead frame - Web tangled on one corner - Must be collected by Friday 21st August

Working order - Selling due to upgrade

14' working width - Tows well - Loading available

Spares or repairs - Tyres holding air - Bed chain needs attention - Tub seems solid - Crash barrier greedy boards - No PTO shaft present - Was used earlier this year until bed stopped

Slight weap on one ram - Hydraulic tailgate - 2 tipping rams - Lights present but untested - Brakes untested - Floor of trailer is fair and had some plates recently - Tyres are in useable condition

Tyres holding air - Mesh drop down sides - Full ramp and rear door - Internal partition - 5'4'' x 3'3'' wide body

Serial No: sCK400000Y0303226 - Lights serviced and working - Spare wheel - Brakes and handbrake working - Jockey wheel - Central partition and 2 breast bars - Rubber matted over aluminium floor - 5 new tyres - Nice clean example - Been kept as a spare in a shed for 5/6 years - 2 brand new ramps

Not been used recently - Tyres holding air, some perishing - Hydraulic brakes & rear valve (untested) - Solid tank and chassis - Pump not working - Top fill and side tap

Previously repaired drawbar, altered for tractor - Lights to rear but not tested and likely to need TLC - Previously repaired tailgate as pictured - Tyres holding air - Odd vent damaged - Some corrosion underneath - 1 tailgate slightly bent - Contents not included - No jockey wheel - Trailer would benefit from overhaul/TLC

Tyres holding air, varying tread - Brakes working well - Spring axles and drawbar - Lights present to rear and working - Twin ram (no weeping) - Solid chassis - Internal tub solid and grain tight - Some corrosion on outer framework as pictured but otherwise in good order - C/w roll-over sheet - Hydraulic tailgate with grain chute

C/w drinker and ball valve - Working - Has ring hitch, 2 jacks (1 front, 1 back) - Tyres hold air - Loading available

3.6m x 4.8m - Mono pitch open fronted with a canopy - Bought from Blackdown Buildings in 2023 - Has a translucent heatguard roof, keeping it light inside - Has guttering and 4 ground anchors - Good condition - Buyer to dismantle and remove

10 ton carrying capacity - Lights present & working - Hydraulic brakes - Brakes working - C/w grain door/tailgate - No sprung drawbar - Standard tailgate type - Floor in good condition - Stored indoors for most of it's life - Matching set of original Avon tyres. Some perishing but tread still very good - Full set of silage sides and grain door with grain chute - Clean trailer.

Chassis and running gear in good order - Body and floor needs attention - Very small leak on ram - Year not known - 12 ton capacity

No lights present - Approx 14' in length - C/w front & rear lades - No strap tie downs - Brakes do not work - Floor in good condition - Tyres holding air but perished - Lades require some repairs.

Tri-axle trailer - 10-stud wheels - 245/70 R 17.5 tyres - C/w 3 spare wheels - Rear and neck ramps - Some rust - Floor needs attention - Not been plated for some years - Lights present but untested - New air suspension some years ago - Would suit conversion into farm trailer - Crawler not included

1750kg carrying capacity - 10' x 5' 11'' - Lights present but untested - Brakes working - Handbrake working - C/w spare wheel - C/w jockey wheel - C/w loading ramps - No winch - Caged sides - Floor in good condition - tyres in good condition, recently new - Tipping gear in good working order but will require a new battery as the existing one is dead. - Owned from new, had reasonable use but been a good trailer. - Looking to sell as the vendor does not use it as much as previously and requires the space - two new tyres recently changed - C/w steel loading ramps.

Same owner for approx 8-9 years, second owner - 4 tyres with good tread but some perishing on walls - C/w spare wheel & tyre (perishing on walls) - Lights present and believed working - C/w full width breast/rear bars or mid-width to accomodate 1-2 horses - C/w central partition - Matted floor and tailgate - Side loading ramp and access door - Jockey wheel present - Old style light plug - Some visible corrosion on axles due to age