Very good condition - Little use since purchase - Stored in shed when not in use - Honda GXH50 engine - Starts first pull - Galvanised frame

Used with some signs of rot - Loading available onto suitable vehicle - This lot must be collected by Sunday 30th August

C/w magpie decoy

Auto turn (42 hen egg) - Used this year all in good working order - Plus chick warmer

Spares or repair - Circa 1890 - Restored 1984 - Barn stored ever since - Very old and fragile - Wheel hubs are badly damaged/rotted - Make nice ornament or restoration project

Spares or repair - Very old wooden horse drawn plough - 1 wheel rim rotted away

In need of repairs - One converted small garden shed - Two purpose built poultry houses and two arks - Ideal for broody hens with or without chicks - All need some repairs to tidy up and put back into use - Vendors have retired from rearing poultry and having a tidy up

Few treatments and some spares - All will need a wash - Odds and ends of associated with poultry rearing - Vendors have retired from rearing poultry so having a tidy up

Wooden with galvanised front section - 9' 10'' long x 7' 3'' high x 45'' deep - Sloping onduline roof - Very good condition - Access doors to kennel and run - Built by Blackdown Buildings

Vintage horse hoe - Probably blacksmith made

Manual - Little use - C/w quantity of clays

Spares or repairs - Predator Cub Pro Poo Collector (spares/repairs) - Tub is solid - Starts and runs but needs a new starter

Marked 1 - Made by Gibsons of Newmarket

Marked 2 - Made by Gibsons of Newmarket

Marked 3 - Made by Gibsons of Newmarket

Marked 4 - Made by Gibsons of Newmarket

Good condition

Good condition

Approx 3 pairs

Complete

Approx 6 - Various bits

Marked 1 - Approx 7 sheets - Various makes

Marked 2 - Approx 7 sheets - Various makes

Marked 1 - Approx 6 sheets Various makes

Marked 2 - Approx 6 sheets - Various makes

5'9'' size - All good condition

16 1/2 '' - Marked Symonds Saddlery, Walsall - All straps present

Red - Good condition

2 red, 2 black, 3 blue - Good condition

All complete - Approx 8

All complete

Working order - Knob missing off control switch - C/w charger

Good condition - 4'6'' size

Various bits and stirrup irons

Plus bandages

Marked 1 - Good condition

Marked 2 - Good condition

Synthetic - Approx 7

Cob size - Plus one used girth

2 doors - 770mm long x 480 wide x 550 high - Removable plastic tray

Due to limited availability of the vendor we will hold two collection mornings. - The first collection day will be held on Wednesday 19th August between 8:30am-10:30am and the second one to be held on Tuesday 25th August between 8:30am-10:30am. - There will be no alternative collections under any circumstances.

One working order, other with no bulb - Due to limited availability of the vendor we will hold two collection mornings. - The first collection day will be held on Wednesday 19th August between 8:30am-10:30am and the second one to be held on Tuesday 25th August between 8:30am-10:30am. - There will be no alternative collections under any circumstances.

2 galvanised Eltex - One plastic - Due to limited availability of the vendor we will hold two collection mornings. - The first collection day will be held on Wednesday 19th August between 8:30am-10:30am and the second one to be held on Tuesday 25th August between 8:30am-10:30am. - There will be no alternative collections under any circumstances.

Sprays, raddle, poultry powder - Due to limited availability of the vendor we will hold two collection mornings. - The first collection day will be held on Wednesday 19th August between 8:30am-10:30am and the second one to be held on Tuesday 25th August between 8:30am-10:30am. - There will be no alternative collections under any circumstances.

Plastic - 32'' x 24'' x 12'' - Due to limited availability of the vendor we will hold two collection mornings. - The first collection day will be held on Wednesday 19th August between 8:30am-10:30am and the second one to be held on Tuesday 25th August between 8:30am-10:30am. - There will be no alternative collections under any circumstances.

On wheels (one wheel bent) - 7'4'' long - Due to limited availability of the vendor we will hold two collection mornings. - The first collection day will be held on Wednesday 19th August between 8:30am-10:30am and the second one to be held on Tuesday 25th August between 8:30am-10:30am. - There will be no alternative collections under any circumstances.

**PLEASE NOTE - This lot previously displayed photos of 'Back Boards' that lined some of the Stables - These ARE NOT included in the sale of the stables ** Fitted into a 60' x 57' building - Comprising of 14 separate stables of varying size - Bolted down and to the walls - All sections are 7'6'' high - Solid wood on the bottom of sections and doors. - Galvanised steel bars to tops of doors and partitions - Longest panel section is 8'3'' long - Stables are made up of different section lengths - All to be dismantled and palleted up ready for collection - Tractor and loader on site available

Custom made

Custom made

34'' x 44'' x 24'' high - Some rot but useable condition

39'' x 53'' x 9'' deep

Not tested

3 small and 1 large

16.5'' - Medium - Unknown make

17.0'' - Medium - Make: Thorogood

17.5'' - Medium-Wide - Make: Ideal

17.0'' - Medium-Wide - Make: Ideal

17.0'' - Medium - Make: Ideal

Interchangeable seats - Brass furniture - Winding balance - Spares basket - Suits 13.2hh-14.2hh horse

Brass hames - 20'' x 10'' - Patent leather Full Collar and Brass Hames - To fit 13.2 to 14hh

Brass furniture - To fit 13.2 to 14hh

Good condition with all pins and clips intact - Approx 52' - Portable paddock, lunging and round pen - High entrance arched top door size can be easily altered by adding or removing panels - Can be used for working and turn out, to enclose any animal not just horses - Galvanised powder coated heavy duty steel - Buyer to dismantle with good access for collection

Galvanised frame with hangers - C/w anti-weave bars - Solid timber

PTO operated - All working well - Always stored in a shed - Had new hoses last year - Selling as surplus to requirement

Good condition

Full set of pony show wagon harness by Alex Marsh - Suit 12.2 pony - Top quality fine harness in show condition - Patent and black leather with sewn in traced and tail stand

Alex Marsh of Canterbury private drive set - Full set of private drive show harness - Patent and black leather with full split 16'' collar and hames, full and false britching - Alex Marsh made this delightfully fine set of gig harness for his own pony. In very good condition.

Set of pony show wagon harness by Freedman of Toronto - Suit 13.2 pony - Used by Mrs Hayden - Little used and in excellent condition

Part set (no bridle) - Full 21'' collar and hames - Black patent and leather with box keepers on britching and crupper - All in very good condition

Full set of pony pairs breast collar harness in black patent and leather with brass fittings and buckles - In good condition, but not show - Maker unknown but all parts stamped SS362

Traditional style gig using modern materials, steel wheels and undercarriage, fibreglass body and shafts - Very light and strong - A lovely smooth ride and easy access for driver - Shafts are easily adjustable for both width and height to accommodate ponies up to a small horse - Good and sound for pleasure driving and rallies, but would need work to bring back to show condition

Tall pony Viceroy (ground to seat 32'') show wagon - Sound chassis, body, wheels and tyres - Would benefit from a repaint - Splash and dash boards need re-leathering - Sold with 3 sets of shafts (12.2 metal, 13.2 metal and 13.2 wood), together with 4 new unused tyres

Stylish, traditional built, wooden pony skeleton gig on Dennet springing to suit 12.2-13.2 pony - Structurally sound, but would need work to bring back to show room condition

Pair of oval fronted gig lamps believed to be by Alf Hales - In good condition

Little use and works well - Only for sale as surplus to requirements

New and unused - 6' x 4' x 10 - 20mm thick - Only been kept inside

Marked 70 - 89mm x 3.6m long - Untreated - New - old stock - Collection day Friday 21st August 9am to 5pm

Marked 71 - 89mm x 3.6m long - Untreated - New - old stock - Collection day Friday 21st August 9am to 5pm

Marked 72 - 89mm x 3.6m long - Untreated - New - old stock - Collection day Friday 21st August 9am to 5pm

Marked 73 - 89mm x 3.6m long - Untreated - New - old stock - Collection day Friday 21st August 9am to 5pm

Marked 74 - 89mm x 3.6m long - Untreated - New - old stock - Collection day Friday 21st August 9am to 5pm

Marked 75 - 89mm x 3.6m long - Untreated - New - old stock - Collection day Friday 21st August 9am to 5pm

Marked 76 - 89mm x 3.6m long - Untreated - New - old stock - Collection day Friday 21st August 9am to 5pm

Marked 77 - 89mm x 3.6m long - Untreated - New - old stock - Collection day Friday 21st August 9am to 5pm

Marked 78 - 89mm x 3.6m long - Untreated - New - old stock - Collection day Friday 21st August 9am to 5pm

2 galvanised metal troughs - A large poultry feeder - Mix of sizes of drinkers - All are in fairly good condition with some of the drinkers only being used a handful of times - Selling due to downsizing flock

Working order

New and unused - Surplus to requirements

Solid and well made - Galvanised frame with plywood

Circa 1930's - Original timber backboard - Approx 1530mm x 250mm - C/w sight glass & original brass fittings.

580mm in length