Sanderson brackets - Wearing edge good - Strong

Adjustable opening width - Some paint damage from storage - Quicke brackets but can come with euro 8 weld on bracket if requested

Manitou brackets - Pipes present - Rollers on arm - Adjustable width - Working

Marked 15 - Skid steer bolt-on brackets - Hydraulic operation - Not very old - Tidy condition, does not appear to have done much work - This lot is part of a genuine dispersal sale due to end of farm tenancy. Viewing and collections by appointment but all lots should be collected and removed by 23rd May 2026 (no access will be permitted after this date)

Marked 16 - Pipes present (some perishing) - Tines present - Euro 8 brackets - Frame solid - This lot is part of a genuine dispersal sale due to end of farm tenancy. Viewing and collections by appointment but all lots should be collected and removed by 23rd May 2026 (no access will be permitted after this date)

Marked 18 - Skidsteer brackets - Pipes present but one side perished and some missing - 1m cubed capacity - Solid - Bent ram on side - This lot is part of a genuine dispersal sale due to end of farm tenancy. Viewing and collections by appointment but all lots should be collected and removed by 23rd May 2026 (no access will be permitted after this date)

Marked 20 - Skid steer brackets - This lot is part of a genuine dispersal sale due to end of farm tenancy. Viewing and collections by appointment but all lots should be collected and removed by 23rd May 2026 (no access will be permitted after this date)

Marked 26 - Spares or repair - Solid bucket - Auger needs attention, no pipes - This lot is part of a genuine dispersal sale due to end of farm tenancy. Viewing and collections by appointment but all lots should be collected and removed by 23rd May 2026 (no access will be permitted after this date)

Marked 27 - Solid - Skid-steer brackets - This lot is part of a genuine dispersal sale due to end of farm tenancy. Viewing and collections by appointment but all lots should be collected and removed by 23rd May 2026 (no access will be permitted after this date)

Marked 35 - Fitted with Bobcat brackets - Top stopper mounts are bent - This lot is part of a genuine dispersal sale due to end of farm tenancy. Viewing and collections by appointment but all lots should be collected and removed by 23rd May 2026 (no access will be permitted after this date)

Marked 48 - Bobcat/skidsteer brackets - Solid and HD - This lot is part of a genuine dispersal sale due to end of farm tenancy. Viewing and collections by appointment but all lots should be collected and removed by 23rd May 2026 (no access will be permitted after this date)

Used for a short period of time so good condition - loader brackets’

Home built on an Albutt frame - JCB quick fit attachment - Very strong build - Used recently

950mm long tines - Good strong build - Marked 2

1100mm long tines - Good strong build - Marked 1

850mm long tine - Good condition

Good working order - No welds or cracks - All tines present - Some pipes perished but still useable - Some pitting on hydraulic rams but still useable

Good tubes & frame - Ram very rusty

Galvanised - In good working order - Approx 4 years old

Chilton brackets - Usable condition - Some rust holes - Good cutting edge

Marked 14 - Solid - Skid steer brackets - Very, very slight bend on one end - This lot is part of a genuine dispersal sale due to end of farm tenancy. Viewing and collections by appointment but all lots should be collected and removed by 23rd May 2026 (no access will be permitted after this date)

Euro 8 brackets - Adjustable width - 1.2m long forks

3 point linkage pallet forks - Lifts as should - C/w hydraulic tip link - Hydraulic pipes perished - Tyres holding air - Adjustable fork width

Hydraulics side shift - 1m long forks - Ideal for 3pnt linkage conversion - Needs welding

C/w hydraulic pipes, joystick controls and spool block - Removed from Massey Ferguson 5445 - Pipes are reasonably good

3 point linkage mounted - 1 weld has let go at the back

5' wide - 10 tines, 1 missing - Some corrosion

Sanderson brackets - Some corrosion but solid

7' wide - Euro 8 brackets - Some corrosion

Removed from Sanderson handler

Believed to be Tanco - Some previous welded repairs - Missing pipe - Sanderson brackets

Sanderson brackets - Used to load reed so welded up

Fully galvanised - Solid floor - Folding back - Good order

Galvanised - Fully loler tested - Slots for pallet forks - Spring shut door - Harness points - Tool tray - Virtually as new - Big saving on new price

JCB brackets - Tines all good and straight - Heavy duty - Used recently

Good and strong

Front edge worn - Has a few welds

C/w Chilton & MF brackets.

Sanderson headstock - C/w mounting brackets - Has signs of wear - Is not very strong.

CATERPILLAR TO MANITOU CONVERSION BRACKET - Caterpillar headstock - C/w mounting brackets - Well made, can be altered to fit telehandler.

3 point linkage - In working order - Like new.

Working order - Pipes like new with locking taps fitted for road use - Just over 7' wide with the wheel base being 6' - Ideal for a small holding or horse yard or travelling to off ground.

Brackets unknown - Possibly Bobcat - 3'9'' wide - Good and strong

All tines good with most still having paint still on - Good cutting blades and has not done much work - Vendor purchased as was going to do clamp silage but carried on doing bales so not required - 1.75m wide

Forks are approx 7' wide and grab is 5' 6'' wide - All tines are solid (not sloppy) - Please note missing one bottom tine and one side tine is bent - C/w euro brackets

C/w Euro 8 brackets - Recent new cutting edge - Back of bucket has been pushed in

Homemade - 32'' long spikes

Owned from new - Good order, little use (40-50 moved each year) - Chilton brackets - SN: 993945

Used last year (only 80 bales a year) - Tines all straight & present - Chilton brackets - Barn stored - Some rust

Brackets Unknown - Dry stored for many years

Very heavy duty & strong - Needs oil on width adjustment pins

Euro brackets - Side bar needs welding

Spares or Repairs, main frame rotting away - C/w Kramer brackets - Missing hydraulic pipes

Brackets to fit John Deere loader - Hold for big bale spike - Useable condition

Recently removed due to change of machine - Good & straight - 3' wide x 27'' deep

Spares or repairs - Locking mechanism doesnt work due to missing part

Euro 8 brackets - Hydraulic - Used summer 2025 - Working order

Recently had a few new pipes

3 point linkage - Frame for bale spike(no spikes included) - Multiple locations for spikes - Approx 200cm wide & 50cm high - Can assist with loading

MASSEY FERGUSON FINGER BAR MOWER

Hydraulic - 1.5m machine size - As new unused, suitable for mini excavator

6'' auger with it - Cat 1-2 - This machine is new old stock never been used but 2 years old

Merlo brackets - 8' wide - Has done little work for age with wear on blade

Pin & cone weld on brackets - Only used in one season in 2022 to do 8 artic loads of sawdust - Tidy condition

Possibly off John Deere - 23'' x 17'' - Good and strong

Both with locking pins - Approx 45kg

150kg approx - Solid

45kg each - 2 with missing clips

C/W bar

Marked 8 - 3 point linkage - C/w storage area - This lot is part of a genuine dispersal sale due to end of farm tenancy. Viewing and collections by appointment but all lots should be collected and removed by 23rd May 2026 (no access will be permitted after this date)

14 x 45kg weights on home made frame - All good condition

Believed to be 50kg - All good - No cracks - Collection day Saturday 23rd May 9am-5pm

990kg in total - In good condition - Can be lifted on & off of weight tray as one (990kg) or unbolted and used individually - C/w a securing clamp

C/w 2 lids - 2 stainless steel

Been used by a 200 cow dairy herd which have since upgraded to robotic milking - No known issues - Good condition - Has always been under cover in shed and undercover - 10,000L Paxton tank which has always been stored indoors - Shakesby Water Treatment Tank (small): Model: MG1354cWW Serial No: 19913 - Shakesby Water Treatment Tank (large): Model and serial No not available. - Lowara Water Pump & Spare Cartridge: 1.1hw 2800litres/min 1.8-5.4m3/hour Serial No: 4G511 - Pentair Sta Rite Booster Pump Jet 100/68M: New January 2021 Single Phase 2hp 10-100 litres/min Pin No: 1110203500A - Oosing Pump - Green Filter - 2 X Banjo (350psi) - 2 X Water Meters

Marked F W. Gilbert Ltd

Working when removed

Spares or repairs

Unigate Food marked on lid

Torridge Vale aluminium milk churn - Mini aluminium churn

Used condition - Vendor is unsure if all will be working but most were when last used

Used condition

Used condition - Most c/w transponders and numbers still attached - Vendor is not sure whether they will all be working but most were when last used

Good working order - C/W ropes

New and unopened - Use by date of September 2027

Used condition

Requires new teats and hook over brackets

Marked 36 - C/w own milk pump, receiving vessel and cluster flush system - Half of a larger parlour with 1 half having already been sold - Dematron 60 - IQ4 cluster - Installed approx 15 years ago - This lot is part of a genuine dispersal sale due to end of farm tenancy. Viewing and collections by appointment but all lots should be collected and removed by 23rd May 2026 (no access will be permitted after this date)

Marked 37 - 3600L - 1840mm x 1750mm - Currently in loft space vendor can lift down from loft with assistance from buyer - This lot is part of a genuine dispersal sale due to end of farm tenancy. Viewing and collections by appointment but all lots should be collected and removed by 23rd May 2026 (no access will be permitted after this date)