Missing discs - Multiple working widths - Rear furrow point broken - Some metal work wearing - This lot is part of a genuine dispersal sale due to end of farm tenancy. Viewing and collections by appointment but all lots should be collected and removed by 23rd May 2026 (no access will be permitted after this date)

SW21F22P - Approx 6m working width - Hydraulic pipes look recently replaced - Been used this spring - Good tyres - Rings look good - This lot is part of a genuine dispersal sale due to end of farm tenancy. Viewing and collections by appointment but all lots should be collected and removed by 23rd May 2026 (no access will be permitted after this date)

3m wide - Came off Howard Powerharrow - C/w brackets and spares - Electric box present - Done less then 1000 acres approx

4M wide working width - Hydraulic fold - Good duckbill tines - Tyres good and holding air - Adjustable depth wheels - Tidy machine

Approx 8 years old - Hydraulic folding - Crumbler rollers with hydraulic adjustment

Good working order with age related marks - one new conditioner bearing - Good wear skirt - Adjustable swath boards - Could do with a few conditioner tines - one belt missing, has had some previous repair to arm - 1000 speed PTO - This lot has come from a deceased estate clearance

Semi mounted, Vari Diamant - Serial Number: 246171

System disc - Pre emergence markers - Following harrows - Hopper extension

Faded paint but good working order - All 160 tines are present - The majority are nearly new - Tyres hold air - Used this spring - Two unopened bags of spare tines (20) included - Loading available by arrangement

Opico DEL-3QS M-C grain dryer - Opico 500QS continuous grain dryer - Same owner for the last 6 years - Full working order and electrical overhaul in 2022 - Dry stored - Tyres holding air

New magnet - 7409 bale count only - Used in 2025, working order - 500mm wrap - For conventional bale wrapping

29,483 bale count - 1 owner from new - 2m pick up - C/w PTO shaft - Oversized tyres holding air with good tread - Used annually including in 2025 - Working order - Dry stored when not in use - No chopping unit, rotor feed - Lights working to rear - Genuine sale due to upgrade only - C/w manual

Bale count 5145 genuine - Year unknown - Owned by current owners for 3 years with sale due to upgrade - C/w remote control - All working as it should - 750mm wrap - Film sensors turned off for demo

Mechanically working but needs attention in respect of tyres (1 flat and some worn) and some missing tines - Hydraulic folding - No lights - 1 arm missing - Approx 12 tines need replacing - C/w PTO shaft

Serial Number: 653631 - 73522 bale count - 125 bale size - 2.2 pick up width - C/w control box - C/w PTO shaft - Good working order, well maintained - Ideal for hay, silage and straw - Produces consistent quality bales - Regularly serviced, no known faults - Genuine sale due to change in circumstances

750mm wrap size - Serial Number: 56949 - C/w control box - Used last season - New wrap tension 2 years ago

Not been used - Hydraulic side shift - C/w PTO - Loading available - 175cm working width

5' baler size - This baler has been used by use for the last 2 seasons - It has been through the workshop this winter and is ready to go straight to work - Net or string, haven't used string with it so not sure if that works - All pickup tines present & has some spare ones to go with it - Automatic chain oiler

C/w hydraulic height adjustment - Hasn't done a lot of work - All rake arms straight - Runs lovely and quiet - Forklift available for loading

2.6m working width - Hydraulic folding with new hydraulic pipe fitted - Metal conditioning tines - Recent new blades - New top hood - Good belts - Runs and sounds nice - C/w PTO shaft - Bed oil has been changed

C/w PTO shaft - Loading available - In good working order - All tines replaced a couple of years ago - Will go straight to work - Only selling as upgrading

Working order - PTO shaft and cover complete - Tyres holding air - Lights need attention - Arms all straight - Last used 2 years ago

Original implements silo push buckrake - Not used until 2019 - 9 wide push off - Hardex tines - Lights working order - Heavy duty - Recently used

PTO guard missing - Working order - Land packer roller - Had a rebuild 7 years ago and only done 100 acres since

In good working order - All tines present and correct - Good solid gates - Fully guarded PTO - Comes with original instruction book - 1 owner from new - Has done 20 acres a year - From a genuine retirement sale as no longer making bales

Lely Splendino 240LC mower conditioner - In good working order - Ready to cut - Runs up fine with no issues - And folds up fine for transporting - Good set of blades on the mower ready to go - 8 spare new blades come with it - Age related wear and rear - No longer required as no longer keeping livestock - Been same owner for last 15 years

Serial Number: VGRK005681 - 0.5 - 1.8m bale size - 36,167 bale count - 2.1m pick up width - C/w control box - C/w PTO shaft - Full isobus machine which will come with its own control box which can control other isobus machines. - Chopper unit. - 2 spare net holders. - Variable bale size chamber. - Variable bale density. - Owned since new. - Only been used for hay and straw the last 4/5 years. - Always barn stored. Wide angle PTO. - Very fast baler - Dented rear panel and left hand side panel but does not affect use whatsoever.

New discs last year - Very good condition

Model: Faro 4000 rotomatic - 500/50-17 tyres, good tread - 1 with slight cut - All holding air - Lights present (untested) - Hydraulic brakes - 6' wide pickup - Working order

Matbro pin and cone brackets - Hydraulic shute - Working order - Used recently

Owned from new - Very little use - Tyres good, holding air - Hydraulic brakes (working) - Flails all present - Lights present and working

Briggs and Stratton engine - 1.1m cutting width - Can be offset - Adjustable height - Good working order - This item can't be collected until after Thursday 21st May

Only done approx 100 acres - Very good condition - Model number: 24TOP85FHD - Few rust spots on ram - 8' cutting width - SN: 187907

Trailed - Good tyres - Cable control type - No longer keeping cattle, so no more use for it

Dual chop - Good working order - Fully serviced and gone through in the workshop, 2 new floor slats, both chopper unit rams resealed, full set of blades, slip clutch has been rebuilt, a few new hydraulic pipes here and there, everything works as it should - C/w Bluetooth controls - Swivel spout - Will go straight to work

Heavy duty - 2.8m working width - C/w PTO - Loading available - Couple cracks but works fine - Wear & tear - New flails last year and has done very little work since

Mounts on 3 point linkage and runs from tractor spools - Has had some recent new hydraulic pipes - Good working order - Vendor only selling as he has now bought a 4t digger - C/w 3 buckets being 3 large digging, trenching bucket & grading bucket

With good tines and in good working order - Only selling as vendor has bought a new set of grass harrows with air seeder built in - Used spring 2026

Same owner for 5+ years - 1 tyre very good, both have tread & hold air - C/w PTO shaft - C/w control box & wires - Net wrap - Baler used in 2025 for a handful of bales

Fully serviced and been through in the workshop - New floor chains and some new joiners fitted - New PTO and slip clutch - Recent new rotor drive motor - Cable control - New rear bale restraints come with it - Good condition for its age - Everything works as it should - Will go straight to work.

Used last year and in working order - Net only - Just under 33,000 bales - Only selling as vendor has bought a combination baler

Serial Number: GCPRECX002772 - C/w PTO - C/w Control box - In working condition - C/w new roll of edge to edge netwrap - Sale due to downsizing

Front & rear mounted - Owned for 4 years - Low hours had little use - Would cut a total of 11m - Rear mowers: 1100c disco business - All Isobus - Hydraulic boom in & out - Lights present & working - Some spare belts & wearing parts - All skirts ok - Front mower: 3200FC disc profil - 4 frame included - All in good condition - Used for this years 1st cut

8 rotor rake - Lights present but untested - Requires a few new tines - Tyres all holding air but some with slight perishing - very tidy for age - Used last season - Working order

Approx 36,000 bales - Tyres good & holding air - Tyre size: 19.0/45-17 - Hydraulic floor pan - Crop roller - Chains & sprockets good - Electric control box (not pictured) - Very tidy - Can go straight to work

Contour flexing - Hydraulic folding - Tyres holding air - Tines good, slight bend on one section - C/w hatzenbichler seeder air 8 unit - Land driven - All pipes in tack - Old but useable - Used last season

1 owner from new - 4.1m cut approx - C/w PTO shaft - Dry stored - Tidy skirt & paint - Viewing & enquires welcome

1 x 42 Green speed high-performance firewood processor - Capable of handling logs up to 42cm in diameter - 14t splitting force - 20'' bar - Hydraulic joystick controls - Green speed system automatically adjust splitting speed based on resistance - Used regularly - Had extensive chassis repair - Chain clutch currently not working but doesn't effect use - Sale due to upgrade

8' roller in 9' frame - Empty, bungs present - Very tidy, had little use

HD frame - Manual folding - Levelling framework - Good condition

Hydraulic side-shift - C/w PTO shaft - 2.5m working width - Adjustable trailing tines to scarify/ aerate ground - C/w rear roller - Tidy paint, in good order

Pipes present - Galvanised hood - Reasonably good brush

SN: ALN00104 - 10' cutting width - 1000RPM - 2015 - Quick fit blades tool present - New set of blades put on - Several new blades and various spares included

C/w Stocks Ag air seeder - Last used spring 2025, and worked well - Only being sold as vendor has bought a power harrow combination unit - All tines present and good - Folds to 3M width - C/w manuals - C/w control box - C/w fine seed rollers

2017 model, purchased 2018 - 1 owner - Bluetooth electric controls - Only used for straw - Recently serviced, in working order - Tyres holding air - C/w PTO shaft - Swivel shute - Tidy paint - Can be seen working, viewing welcome

Reversible - Fitted with YCN bodies - Hydraulic front furrow width - Greased up and barn stored

9m working width - Have been used for 6 season but looking to upgrade

In good working order when last used 2 years ago - Had a lot of money spent on it and has always been kept up together and stored in the dry - Had new tyres, blades, belly liners, shute liners, bearings & not done many acres since - Has shute extensions for side loading and a hitch on the back for trailed loading - Has electric controls - C/w additive tank holder - Only being sold as using forage wagons and a fusion baler now

Front or rear mounted - Serial Number: PRO250210160086 - 2.5m cutting width - Hydraulic side shift - 1000RPM gearbox for 250hp - Rear roller - Whale tail fails in good condition - Recent new belts - Very heavy duty machine - Full working order and runs well with no vibration - Has only done light work - Very tidy condition - C/w operators book, pins & spare belts

Last used 2 years ago but put away in working order and dry stored since - New Knotters fitted 3 years ago - New Pick-up chain fitted 3 years ago - Tyres holding air - C/w PTO shaft

Chopper baler - Bales 120CM x 70CM - Bale count says 22,800 but vendor bought baler approx 5 years ago when bale count was 15,000 but past vendor believed it had done 75,000 bales, so baler believed to have done approx 80,000 bales in total - New ECU unit 2 years ago - Worked well last summer - Auto lube - String only - C/w bale ejector - Please note applicator tank will be removed before sale and is not included in sale

2.3m machine - Recently been used - Good working order - Needs Guard on PTO

Consists of 2 Mchale 995LM wrappers mounted to a 21' twin axle curtain side trailer - Both wrappers work off tractor hydraulics - Pressure on return - Electrics do both wrappers - Trailer lights untested

One pass cultivator - Will go 500mm deep - Auto reset - Hydraulic depth control - New feet pictured will be fitted prior to sale - Last used Autumn 2025 - Good working order

2,155 bales only - 1 owner from new - C/w PTO shaft - 2 tyres with good tread - Lights present to rear - 1 Pick up reel tyre soft - C/w control box - Serviced by Andrew Symons during ownership - Some knives present

Recent new crown wheel & pinion - All tines present - Tyres holding air - Hydraulic folding - Owned for 10 years - Viewing & enquiries welcome

Direct drill - C/w double shot coulters & pea & bean coulters - Electric metering - Hydraulic fan - Last used Autumn 2025 - Good working order - C/w spare double shot feet, single shoot feet, pea & bean feet - C/w full set of lead legs

3 leg - Auto reset - Bought as Ex demonstrator & vendor has only done 50 acres with it - C/w packer roller

1 owner from new - 716 bales only - 2 very good tyres - Lights present to rear - Substantial paint flaking in places - Hydraulic loading arm - C/w control box - 750MM wrap - Front prop-stand

2020 AWEMAK 5M PUMA CA 50 TRAILED TINE CULTIVATOR - C/w levelling boards, crumbler roller, 4 sets of tines & compactor roller - Hydraulic folding - 5 metre working width

2021 Awemak Ozyrys BTB 3m Disc Harrows (2 sets of discs, straw tines and compactor roller) - C/w Awemak Sherp GS30.5 5 leg subsoiler - Only been used as a demonstrator - 3 metre working width

C/w low disturbance legs - 5 leg - Auto reset - The machine is part of the Awemak heavy duty range. Bearings on discs are NSK bearings which are German made. Wearing parts are Italian made and available from Cramp, Spaldings and other distributors.

2 sets of discs and compact roller - Never been used - The machine is part of the Awemak heavy duty range. Bearings on discs are NSK bearings which are German made. Wearing parts are Italian made and available from Cramp, Spaldings and other distributors

Spares or Repairs - Believed to be 1970/80's - 2.5-3m working width - Loading available - This is the less common 130 drill for direct drilling - 2 machines - Lots of spares - Becoming collectors item - Dry stored - Sold as seen as they haven't been used recently

Spares or Repairs - C/w PTO shaft - C/w Control box - 1.8m pick up width - Working order when last used 3 years ago - Will need servicing before going to work - Sold as seen - Was dry stored until recently

4 +1 . Shear bolts legs no disc. - Some good metal. - Had some previous welding done including 1 rear board - Has depth wheel

Barn stored - Triple cutting blades - Height adjustment 20-160mm - Recently serviced - Offset drawbar facility

Lelyterra 300-35 power harrow - Accord DA Drill - C/w disc markers & trailing tines - 3m working width - C/w PTO shaft

C/w control box - No remote - Wrap size 500mm - Belt has slight tear but never got worse or affected use - Off of a small farm - Barley wrapped 100 bales with current owner - Does a good job and wrap is tensioned well - Engine believed to be Peugeot 1.9TD - Starts and runs great and easily powers the wrapper without using hardly any diesel - Greased before and after use - Stored inside year round - No battery supplied but can show purchaser it is working on collection - Wrapped all bales last year without fault apart from the cutter blade is blunt so occasionally does not cut the wrap. - The year before it needed the cutter arm time adjusting so that it opened and closed properly but there were no known faults with it. Has not been a problem for current owner as relative has manually cut when required.

S/N: 1007253 - Fully galvanised - Hydraulic folding - Hammer head - Spikes in new condition - Little use from new - Loading available

In good working order - Was used last year - Comes with some spare tines and springs - Good set of gates - Has solid stand - Never been welded - Full guarded PTO

Good working order - Spins up fine with no issues - Tyres holding air fine - All tines present, 2 are broken but will be replaced if not two new tines will come with machine - Has good strong stand - Has never been welded - Good straight gates - Fully guarded PTO - Good machine ready to work this season

1970's - C/w PTO Shaft - Dry stored - One new tyre recently, both holding air - Not used in the field recently however owner put some straw through it in summer of 2025 to ensure it is working ok - No telehandler on-site

Approx 3m working width - No lead bar - All points present

Spares or Repairs - 6M wide - Mat requires attention

93amp, KVA unknown - C/w change over box - Working when last used

Marked 30 - C/w PTO shaft - Solid tub - Buyer must hitch up or load themselves, tractor on-site not really suitable to lift - This lot is part of a genuine dispersal sale due to bereavement and the auctioneers having sold the property. Access is limited to trucks and trailers and small lorries due to the nature of the property entrance and surrounding roads. All lots will be available to view on Friday 15th May between 10am-4pm. The collection day will be held on Friday 22nd May where there will be loading available by tractor and loader along with Stags staff to assist.

Marked 38 - 9' frame - Some bends in frame - No loading on-site - This lot is part of a genuine dispersal sale due to bereavement and the auctioneers having sold the property. Access is limited to trucks and trailers and small lorries due to the nature of the property entrance and surrounding roads. All lots will be available to view on Friday 15th May between 10am-4pm. The collection day will be held on Friday 22nd May where there will be loading available by tractor and loader along with Stags staff to assist.

Marked 53 - Spares or repair - Mechanical condition unknown - Pipes visibly perished - Significant corrosion in places - Buyer must be able to load/remove themselves - This lot is part of a genuine dispersal sale due to bereavement and the auctioneers having sold the property. Access is limited to trucks and trailers and small lorries due to the nature of the property entrance and surrounding roads. All lots will be available to view on Friday 15th May between 10am-4pm. The collection day will be held on Friday 22nd May where there will be loading available by tractor and loader along with Stags staff to assist.

Type - LB - 275 - 3 rota blades - Used last year - C/W PTO - Working order - This lot is part of an unreserved dispersal on behalf of a deceased estate. Please note there will be a viewing day on Friday 15th May, between 10AM and 4PM and a collection day on Friday 22nd May, between 9AM and 5PM. The sale site will be signposted from the Mount Pleasant Inn pub, Nomansland, EX16 8NN.

C/W PTO - Last used in 2024 - Odd tine broken - Tyres holding air - This lot is part of an unreserved dispersal on behalf of a deceased estate. Please note there will be a viewing day on Friday 15th May, between 10AM and 4PM and a collection day on Friday 22nd May, between 9AM and 5PM. The sale site will be signposted from the Mount Pleasant Inn pub, Nomansland, EX16 8NN.

C/W both PTO's - Not used for a number of years - This lot is part of an unreserved dispersal on behalf of a deceased estate. Please note there will be a viewing day on Friday 15th May, between 10AM and 4PM and a collection day on Friday 22nd May, between 9AM and 5PM. The sale site will be signposted from the Mount Pleasant Inn pub, Nomansland, EX16 8NN.

Last used in 2024 - C/W PTO - 6' cut - Working order - Please note clevis pin on PTO is missing - This lot is part of an unreserved dispersal on behalf of a deceased estate. Please note there will be a viewing day on Friday 15th May, between 10AM and 4PM and a collection day on Friday 22nd May, between 9AM and 5PM. The sale site will be signposted from the Mount Pleasant Inn pub, Nomansland, EX16 8NN.

C/W PTO - C/W spare blades - Not used for a number of years - This lot is part of an unreserved dispersal on behalf of a deceased estate. Please note there will be a viewing day on Friday 15th May, between 10AM and 4PM and a collection day on Friday 22nd May, between 9AM and 5PM. The sale site will be signposted from the Mount Pleasant Inn pub, Nomansland, EX16 8NN.

Last used 2 years ago - All complete - Marked 'DRFIN' - This lot is part of an unreserved dispersal on behalf of a deceased estate. Please note there will be a viewing day on Friday 15th May, between 10AM and 4PM and a collection day on Friday 22nd May, between 9AM and 5PM. The sale site will be signposted from the Mount Pleasant Inn pub, Nomansland, EX16 8NN.

C/W PTO - All tines present - Not used for a number of years - This lot is part of an unreserved dispersal on behalf of a deceased estate. Please note there will be a viewing day on Friday 15th May, between 10AM and 4PM and a collection day on Friday 22nd May, between 9AM and 5PM. The sale site will be signposted from the Mount Pleasant Inn pub, Nomansland, EX16 8NN.

3 point linkage - Good example - Dry stored - This lot is part of an unreserved dispersal on behalf of a deceased estate. Please note there will be a viewing day on Friday 15th May, between 10AM and 4PM and a collection day on Friday 22nd May, between 9AM and 5PM. The sale site will be signposted from the Mount Pleasant Inn pub, Nomansland, EX16 8NN.

5'10'' working width - Used last year - Tyres holding air - All tines present - This lot is part of a genuine reduction sale, the vendor no longer actively farming or keeping livestock.

3.6M working width - Manual folding - 4 lap drags - 3 point linkage - This lot is part of a genuine reduction sale, the vendor no longer actively farming or keeping livestock.

Good condition - Little use - Good rubber