4' internal - C/w rear door - Suits a compact tractor - Tipping - Little use

Model: 23 DBHYD - Believed 2023 - Hydraulic folding - 3 point linkage mounted - Little use - Barn stored

Euro 8 brackets - Some rust on ram - Barn stored

Frame is 32'' wide x 26'' high - Spike bent, no brackets or pins

Bracket type: trimma - 1 meter length - All working

2.3m wide - 1000 Litres - Euro brackets - 25mm tines - 70mm hydraulic rams - 6mm shell with reinforcement - Can be sent on pallet for additional cost

2019 TAYLOR ATTACHMENTS PIN & CONE HEADSTOCK ADAPTOR - For Mx loader - hydraulic latching - Not done a massive amount of work (loader was back up to handler)

Good condition

3'7'' wide - Trima brackets - Missing 1 hydraulic pipe - Some rust on ram

Euro brackets - Purchased in 2022 - Little use - Serial number: 33847022003

Strong

Spares or repairs - Repair needed

MF180 Bracket type - Rubbing on hydraulic hose but not leaking - Good working order

1400 litre capacity - Side discharge door - Currently on 3 point linkage tipping frame but can easily be unbolted to add handler or loader brackets - Also has bolt on MX/Chilton brackets - In working order - Solid and good auger - Has not done a lot of work for age - Has been barn stored for many years due to change in feed system.

1T lift - Needs new hydraulic pipes

2m wide - C/w Euro 8 brackets - Needs a cutting edge and new bottom

Telehandler sold so no longer need - Pipes present - Due to the vendors limited availability, collection is preferred on Thursday 2nd April between 10am-3pm or by limited appointments thereafter.

Solid chequer plate floor - Solid framework - Used on MF T20 now also being sold seperately - Dry stored, in good order - No mechanical loading on-site

18'' tines - All tines present - 1 tine bent - Some rust spots on rams.

Euro 8 brackets - 3' spikes - Little use

Working when removed from tractor

Euro 8 brackets - 3' 6'' tines - Good condition

To be used with tines on grab - Very little usage

Spares or repairs - Euro 8 brackets - Oil pipe fittings to rams need replacing

2 tines (1m long) - Rated 700kg capacity - Solid framework

Unused/unfitted - Manual handle

Spares or repairs - Euro bracket - Missing hydraulic hoses - Brand unknown - Hasn't been used for several years

Removable back - Floor needs renewing, some corrosion

Believed Euro 3 brackets - Lower bar on frame has some corrosion

Hydraulic pipes present but some perishing - Solid framework

Modified and used for big bales - Was a muck grab converted to square bales - Not used for 10 years so will need attention to get working - C/w Euro 3 bracket -

Euro 8 brackets - Has been welded in places - Main pin is worn - Some perishing on pipes.

Pin & cone brackets - Can carry 3x4 stringers or 1x6 stringers.

Spares or repairs - Pin & cone brackets - Does work - Rams leak - Would make good bale spike

Pin & cone brackets - kverneland tines - unused but shop soiled - Hydraulic pipes present - Purchased for a job that ever happened - No rust on rams

Good metal - Tines are all present but one is slightly bent

Never had brackets welded on

Adjustable opening width

Euro brackets - Can be used for 3 point linkage - Had little use

Believed to be 2018

Spares or repairs - New hoses - Refurbished ram - Euro brackets - Good working order

Spares or repairs - No ram - Other wise good condition - Euro brackets

2014 Cherry products - Removed from FL100 class loader - Hydraulic locking points - Heavy duty

C/w pallet tines & hydraulic locking - Has done 3000 from an arable machine, never seen cow muck. - Came off a 542-70 JCB.

Weld on attachment brackets.

Only been used a few times - Good condition

Flat faced brackets -

Euro 8 brackets - No longer required.

Well made

Removed from Fordson Dexter

JCB Q fit bracket - One spike slightly longer than the other

Very solid - Loading available - Viewing and enquires welcome

Pin & cone fitting - Possible Kramer/old JCB to 3 point linkage (not definite)

Age unknown - Euro brackets - Bottom base bar cracked - C/w hoses - All tines present

C/w Euro 8 loader brackets - Removable rollers to access spikes - Working order

New - C/w spool block

Marked as no.1 - This lot is part of a genuine end of tenancy dispersal sale - Due to other commitments, if any interested parties wish to book viewing appointments, availability is on Thursday 26th March or Friday 27th March between the hours of 11am & 4pm - Collection is also preferred by appointment only on Tuesday 7th April or Tuesday 14th April. - Very limited alternative collections may be possible but STRICTLY by arrangement with the vendors - All lots must be removed from the farm by Sunday 19th April under any circumstances

Marked as no. 2 - Angled plate where it has been removed - This lot is part of a genuine end of tenancy dispersal sale - Due to other commitments, if any interested parties wish to book viewing appointments, availability is on Thursday 26th March or Friday 27th March between the hours of 11am & 4pm - Collection is also preferred by appointment only on Tuesday 7th April or Tuesday 14th April. - Very limited alternative collections may be possible but STRICTLY by arrangement with the vendors - All lots must be removed from the farm by Sunday 19th April under any circumstances.

Some rust on ram - Solid framework - All tines present - Hydraulic pipes present - This lot is part of a genuine end of tenancy dispersal sale - Due to other commitments, if any interested parties wish to book viewing appointments, availability is on Thursday 26th March or Friday 27th March between the hours of 11am & 4pm - Collection is also preferred by appointment only on Tuesday 7th April or Tuesday 14th April. - Very limited alternative collections may be possible but STRICTLY by arrangement with the vendors - All lots must be removed from the farm by Sunday 19th April under any circumstances

C/w stand legs - MX Chilton Head stock- C/w Brackets which are currently fitted on a John Deeere Tractor and will be removed if successfully sold - 3rd service - Some perishing on hydraulic pipes, some may need replacing - C/w This lot is part of a genuine end of tenancy dispersal sale - Due to other commitments, if any interested parties wish to book viewing appointments, availability is on Thursday 26th March or Friday 27th March between the hours of 11am & 4pm - Collection is also preferred by appointment only on Tuesday 7th April or Tuesday 14th April. - Very limited alternative collections may be possible but STRICTLY by arrangement with the vendors - All lots must be removed from the farm by Sunday 19th April under any circumstances

With extension bracket - No brackets or spools - C/W 2 double acting lift rams

Solid spike - Some corrosion on back plate

Floor needs repairs - Opening back gate - Solid framework

Both rams ok (no leaks) - Pin and cone/Manitou brackets - Some teeth on front blade damaged - Solid although some corrosion visible - Hydraulic pipes present (some perishing)

3 tines damaged - Manitou brackets - Triple rams - Hydraulic pipes present - Solid framework

Removable filter - 2011 made - Wear on bearings - End of rollers are dented

Volvo/JCB industrial brackets - Farmer owned and run from new - Will go straight from work

2M width - Manitou brackets - Heavy duty - Large capacity with 130CM opening - Only selling as company renewal policy

Chilton brackets - All tines straight but one missing

Chilton brackets - 3 tines (longest 112CM, all straight)

Chilton brackets - Usable condition - Some rust holes - Good cutting edge

Fits compact tractor - Bucket 2' wide has been plated sometime ago - Usable condition

No previous welds

Forklift loading scoop / bucket for loading of loose materials - Drive into heap, lift and tip using trip handle - Handy for loading material when loader not available - Good condition - Scoop size IS approximately 1.3 m wide, 1.1 m deep, and 0.5 m tall

Came off a John Deere 2140 - Believed to fit 4 cylinder 40 series tractor

C/W trima loader brackets - Needs patch/new floor

C/w Euro 8 brackets - Recent new cutting edge - Back of bucket has been pushed in

Unused

Adjustable width

Euro 8 brackets - Twin ram - Most tines ok, odd one would benefit from replacing - Pipes present

Little use - 45MM pins - 233 pin centres - 152MM dipper gap width - To fit TB250 or similar

Hydraulic - 1.5m machine size - As new unused, suitable for mini excavator

35mm pins - Strong bucket but couple of holes in floor - with teeth

35mm pins, 1 pin missing - Good & strong - with teeth

Model U27-1 - 35mm pins, approx 140mm distance from centre pin to pin - Approx 114mm internal headstock width

1.2m long forks - C/w hydraulic top link - Strong - Working

Removed from Case 688 machine - 60mm pin holes (slightly worn) - Good & strong - Bottom slightly bent

Spares or repairs - 50mm pins - Bucket designed for sorting stone from soil and sand.

45mm pins - Various widths - Hardly used - Came off a 6T Komatsu which was sold.

Manual quick hitch has 50mm pins - Buckets and hitch came off a Takeuchi FR180 digger - 3 buckets have 40mm pins and are 58'' grading bucket (some holes in floor), 35'' digging bucket (floor needs attention) and 16'' trenching bucket

Came off a Takeuchi FR180 digger - Size is W450 x 81 x 76 - Some fire damage on tracks otherwise good tread. One tread only slightly damaged

Excellent condition - Very little use

All complete - Not broken

3 point linkage frame - 14 x 55kg weight - 10 x 40kg weight

Good strong - C/w hooks

Have bolt holes