In good condition - Hydraulic folding boom - C/w In cab control box - Induction hopper

Serial Number: 496153 - C/w PTO shaft - Lights working - Brakes working - Recently had new beater, rubber, couplings & gearbox top bearings

Dual chop - Good working order - Fully serviced and gone through in the workshop, 2 new floor slats, both chopper unit rams resealed, full set of blades, slip clutch has been rebuilt, a few new hydraulic pipes here and there, everything works as it should - C/w Bluetooth controls - Swivel spout - Will go straight to work

Fully serviced and been through in the workshop - New floor chains and some new joiners fitted - New PTO and slip clutch - Recent new rotor drive motor - Cable control - New rear bale restraints come with it - Good condition for its age - Everything works as it should - Will go straight to work.

Fully serviced and been through in the workshop, new bed oil, new gearbox oils, PTO slip clutch has been rebuilt and has new PTO guard - Full set of brand new blades have been fitted and comes with the spare blades - Nice tidy machine for its age - Fully working order - Will go straight to work.

C/w PTO - C/w headland management - Hydraulic folding - Tyres in good condition - Used on 50 acres used last year - Barn stored - Tines all present - Tidy

Vicon PS04 Wagtail Fertiliser Spinner - C/w PTO shaft - 500kg plus capacity - Had very little use from new, used a handful of times - Dry stored - Hydraulic shut-off - 1 owner from new

Only done approx 100 acres - Very good condition - Model number: 24TOP85FHD - Few rust spots on ram - 8' cutting width - SN: 187907

Netwrap or string tie - Hydraulic pick up - New belts in 2022, only done 100 bales since - 41,991 bales

Manual pick up - Good working order - Has been mainly used for re-baling bigger bales to smaller bales - 31059 bales on counter

Spares or repairs - When up and running it has a knocking noise - 1 wheel missing and a couple of tines

Good working order - Can be mounted on front or rear - New belts

SN:1972/03 - 9' working width - C/w new PTO,blades & bolts - Solid rubber wheels - 1 owner since new - Only for sale due to relocation of farm - Loading available

Serial number: 090782 - 2.8m working width - C/w PTO shaft - Hydraulic side shift, hammer flails had little use from new - C/w a spare set of new belts - Loading available

Serial number: 99742 - 1.8m working width - C/w PTO shaft - Can be used on front or rear linkage - Hammer flails had little use from new - Loading available

Serial number: ZA0009071 - Electric control box - Electric shut off - PTO driven - Amatron 3 box - Disc - 28M spread - All in working order - Has had very little use in last 2 years - Vendor is only selling as they have given up cereal production

Serial number unknown - Vendor has owned since 2005 - C/w PTO shaft and control box - In working order - 64'' pick up measured )1.4m just over) - Been used for single cut silage on family farm - Gear has never been pushed and has been on old John Deere Tractors - Always been barn stored, greased and oiled every year - Had a repaint inside and out with good quality paint - Had a shoot rebuild and is stronger than original as made with thicker metal, has been used for years like this - Reverse has never worked but has never affected using it - For sale due to bereavement - C/w spare blades, holders, bolts and control box - Can also come with very old spare but not in great condition - A second even older forager with transferable parts can come with it too if wanted but not required to take either. - A bit of perishing on tyres due to age

Consists of 2 Mchale 995LM wrappers mounted to a 21' twin axle curtain side trailer - Both wrappers work off tractor hydraulics - Pressure on return - Electrics do both wrappers - Trailer lights untested

9' working width - PTO fully guarded - Good working order - Surface rust - No holes - Runs smoothly - Loading available onto trailer or similar

2008 - Both 8' wide - Good working order - Metal work in good condition - Blue coloured frame - Filled with water - Only for sale as vendor has upgraded

3 point linkage - Good machine - Always cleaned after use - All points present

Trailed - Good tyres - Cable control type - No longer keeping cattle, so no more use for it

Good working order - Tandem steering axle bale ejector - Auto lube and auto grease - Just over 90k bales - Isobus or comes with a control box

Good metal work all round - Classic cutters - Eradication tines - Marker arms - New fan bearing fitted last year - Lights in good condition - Packed away last year ready to go to work, opportunity arose to upgrade after using for 6 seasons - Maize drill set at 75cm spaces and can be adjusted to suit

Feeds either side - Bought new on farm - Single axle - The conveyor chain was replaced approx 3 years ago (has done very little use and not been used within the last year) - Maintained and serviced by Andrew Symons LTD - C/w manual control

Serial number: A30277 - Working order - PTO shaft - Lights and brakes untested - Rust in drum - Needs a new pipe for brakes - Needs a plate on the front and drum - Needs a few chains shortening - Was last used last winter - New bearings on the rotor

Approx age is 2006 - 180kg - 3 point linkage - No leaks - 1 owner - Swing around - Vendor is selling due to upgrade

C/w ridge markers - C/w tramline tines - Hydraulic folding drawbar - Some rubbers perished but does come with spares - Tyres holding air

5m working width - C/w 9 attachable ripper legs (some wear) - Hydraulic folding - Well built - Discs worn approx 50% - C/w rear pack roller - Hydraulic pipes perished - Manual adjusting disc angle

Fitted with hammer flails - Rear mounted - Hydraulic side shift - PTO present

Good working order - Reconditioned bed - Lots of new parts throughout - New conditioner bearings & belts - Tidy machine for age - Fully serviced and ready to go

Rear discharge - 12T capacity - Winde angle PTO - Slurry door - Vredestein 520/85R38 tyres in good condition - Good chains, slats and sprockets - Manual bed speed control - Good lights and brakes - Tidy spreader in good working order - Slurry door is getting thin but is servicable - Selling due to opportunity to buy a newer machine.

2700 litre capacity - Lights are not working - 24m spread - Variable rate spread depending on forward speed - Good condition for age - Used this year, only selling due to needing bigger spreader - No hydraulic shut off - C/w Control box - Disc spreader - Serial No. 1298

Swipe/chain topper - C/w PTO shaft - Solid tub - Heavy duty and well made - 6' cut approx - Due to the vendors limited availability, collection is preferred on Thursday 2nd April between 10am-3pm or by limited appointments thereafter.

THIS ITEM IS +VAT - Hydraulic offset - C/w PTO shaft (new in 2025) - 2.3m cut - Working order - No oil leaks but comes with 5L of gear oil purchased to top up oil 2 years ago - Rear roller - Solid metalwork - Slight crack in support bar as pictured but previous repair carried out

Age unknown - Fairly new PTO shaft - Auger could do with patching - Working order - No wobble door - Rotor could do with a few new flights

New Holland 648 Variable Round Baler - 35,000 bales - Bale command plus controller - Crop cutter - Net or string - Wide angled PTO - Makes bales from 30'' to 5' in diameter - Well maintained - All works as it should - C/w spare belting and handbook - Always been barn stored

78,008 bales - Used in 2025 - 120 x 70 bale (flexible length) - Sale due to upgrade - Any inspection/ demo welcome - Rear camera - Owner owns both conventional Ring Hitch and Ball & Spoon Hitch so is happy to supply the type which is preferred by purchaser - Isobus or control box (c/w control box) - LED work lights and rear lights present - Full winter service in 2024/2025 winter totalling over £4,000 (invoices available) - Bale ejector (new VFS 4 years ago approx) - Has been a very reliable baler during ownership - Cosmetically tidy

C/w PTO shaft - No control box - Lights working - Brakes working - New bolts fitted to chains - All working as should - Serial No. 2A108525RI - Never used knocking the barrel -Selling due to upgrade to bigger spreader

C/w PTO shaft - 2.4m cutting width - Good condition for age - Everything works as it should - Some new parts last year - Gear box & bed oil changed last year by main dealer - Stored in shed - Owned since new - Loading available if required.

KVERNELAND ACCORD EXACTA-CL FERTILISER SPREADER - Believed around 2007 - Twin Disc - Holds 1,800kg - Working when last used 12 months ago then switched to using liquid nitrogen

Serial No: KS898647 - 9m max working width - Individual rotor lift - Hydraulic width adjustment - Folding outer arms for transport - Wide angle PTO - Light working - Tine arms are straight - All tines are good and present - Tidy rake in good working order - Has been farmer owned for most of life

2015 Lely Splendimo 280 Mower Conditioner - Serial number: 0003209048-2015 - 2.8m cutting width - PTO shaft - Loading available - Barn stored - Good condition - Has been 1, apart of a pair - Good skids and some new plastic conditioner flails fitted last year - Vertical folding

Massey Ferguson 137 inline conventional small baler - C/w PTO - Pick up width: 1.7m approx - Bale counter does not work - Owned by the vendor from new - For 15 years it has done about 500 to 1000 bales a year - Good working order - Bale count is unknown but it did about 10000 a year when first owned - It has lately used for a little hay or straw - All panels are straight and has always been stored under cover

One tyre slightly perished - One fairly new - Lights present and working - Brakes present and working - PTO guards correct - Some rust and corrosion - Been in use until recently - Replaced with a newer model

Tramline kit - Working - Same owner for last 5 years - Hydraulic folding

2.8 meter cut - Good working order - Some sign of rust but nothing major

Gross weight 340kg - Runs off digger third service - Approx 45mm headstock pin - Headstock plate removable - Currently pictured on 5T machine - Would benefit from a new rubber pad

C/w PTO - Hydraulic folding - Nylon conditioner tyres in reasonable order - Adjustable swath boards - Blades in good order - Dry stored - Used last year - Odd small hole in skirt & damage to ends - For sale due to upgrade - Impeller Hi-Crop flow

In good working order - Age unknown - Pump sucks and blows & builds up pressure in the tank fine - Has working hydraulic gate on the back and a manual gate on the side - All lights working on the rear - Full PTO guard - Tyres holding air fine with plenty of tread - No brakes - Manual outlet on the rear has had repair. Doesn't affect use.

In good working order - runs up fine as shown in video - Good wheels and tyres with plenty of tread - Has brand new brake pipe - Brakes working fine - Fully working lights - Has new PTO and full guard - Tub has no holes but a few dents - Lid has had 1 weld.

In good working order - Was used last year - Comes with some spare tines and springs - Good set of gates - Solid stand - Never been welded - Fully Guarded PTO

Twin disc - 2000L hopper - LED lights - PTO cover good - Good condition - C/w electric control box - Serial No. 1663

Sprung drawbar - Bed chains appear to be good - Hydraulic brakes (untested) - LED lights (untested) - 18.4 - 34 tyres (holding air) - No slurry door - Some weld in places - Tidy for age - PTO cover intact.

Bed chains appear to be good - Hydraulic brakes (untested) - Lights present but damaged - Tyres holding air - Recent new PTO shaft & cover - Appears to be in good condition

Hydraulic lift & fold - Some pipes show perishing - Good Year 19.0/45-17 Tyres (slight perishing) - Lights need attention - Bearings appear to be good - Braked axle (untested) - Very heavy duty

2015 KRM DYNAMIC M2W PLUS FERTILISER SPREADER - Twin disc - Type M2W DI - Serial no. 174/15 - 2000L hopper - Dynamic section control ready - PTO shaft present (requires new cover) - LED lights (not tested) - C/w electric control box

Holds 3 x 600kg bags - 12-24m - Adjustable vanes - Working order - Just spread 375 acres.

Bought as a spare but never used - Tyres holding air but perished - Lights & brakes present but untested - No PTO shaft - Electric box present - Tub appears to be sound.

Owned from new - Barn stored - Only done 50 acres per year - Used to till pheasant cover - Lights present and working - packer roller - PTO shaft cover needs replacing - Appears to be in good condition

Nylon condition tines - Adjustable swathe boards - C/w PTO shaft - Hydraulic folding - Skirt slight tatty on end - Sale due to upgrade - Viewing and enquiries welcome

Swell shute - C/w PTO shaft - Mounted - Viewing and enquiries welcome

20 metre sprayer converted to 21 metre, could be changed back - Used last season - C/w PTO, manual & control box

Trailed machine - C/w swivel shute - Rear lights (one side damaged) - C/w PTO shaft - Good paint - Electric controls - Viewing and enquiries welcome

Bought new 4 years ago and only done approx 12 acres - Galvanised frame - Manual folding

Tyres holding air - Metal work solid - With ground contour

C/w PTO shaft - No metal detector - C/w control box - 2 row pick up width - Was working when parked up

Used but good condition - Needs new batteries

Serial number: B376W8153 - PTO shaft

Spares or repairs - Teagle Tomahawk 8080 straw chopper - Trailed linkage - Was in working order when put into shed probably 7-8 years ago - Hoses showing perishing (two have gone) - 1 new tyre and PTO guard recently fitted - C/w control box (untested but been stored indoors) - It is thought that it wouldn't take too much work to bring back into use (mainly new hoses)

Spearhead Twiga 545 - 1.2m head working width - 5.5 maximum reach - Joystick control - S/N: 148040 - T flails - 3 point linkage - PTO shaft - Lights are untested - Paint is quite flaky and the hydraulic oil level glass is missing, has been bunged - The lower pipes for the head are perished but aren't leaking - The vendor has some replacements in the shed - Very tight on the bushes and the head runs up nicely without vibration - Loading is available

Nett and string tie - Approx 6' pickup - Has come straight off farm and will need a service - Unknown bale count - Lights present but not tested - Some rust on panels

Same owner since 2017 - 4 string 80W x 70H bales - No control box needed, all manual - Electric fan to keep knotters clean and working camera - Steering axle (hydraulic lock off) - Hydraulic bale eject & pick-up reel - 4 good tyres (fitted recently) - Hydraulic brakes - C/w PTO shaft - Being sold due to upgrade - Used recently this season - Any inspection or viewing welcome

Good condition - In full working order - Headland kit - Recently overhauled gearbox's

Good tyres with suction hose - Splash plate

New mechanical seal fitted - New PTO guard to be fitted

Bale count: 33,762 - Barn stored - C/w PTO - Tyres have some tread - Used in 2025 - Tyres worn - C/w chopper knives - Auto chain lube - Chains tight - Lights present but untested - C/w control box - Maintenance carried out by main dealer - Farmer owned for last 7 years - Makes good firm bales

Dual chop - Trailed linkage - Swivel shute - Lights working but not tested - Tyres in good condition - No known faults - All works as it should - Has had new lower inspection panel - New beater drive chain - New PTO guard

Mounted linkage - Swivel shute - Lights working but not tested - All works as it should - Has had a small fire due to bearing failure - New bearing fitted along with new drive chain and drive sprocket

5 furrow plough - Plough ready to go to work - All new moldboards - Lots of new wearing parts fitted - New bushes fitted on the turn over ram and wheel - New bushes fitted on memory ram - Furrow width currently set on 16' - 2 new discs fittted spring 25

Regularly used for the collection of grass and hay - The steepness of the farm has restricted its use and therefore no longer required - 7ft pickup width - Last used in 2025 - Clipped pro shaft - Tractor side bent

Dry stored - Low hours - Petrol - Good working condition

Row accumulator - Used for one season - Farms tractor is too small and hills to steep - Works well - Takes straw or hay rows and puts into one

Spares or repairs - C/w PTO shaft - Brakes working - Needs repairs/patching - No control box - Serial no. 2122412

4m working width - C/w control box - Lights untested - Owned for 4 years - 5'' dutch openers - Tidy - Good working order - Only for sale as bought a 6m sprinter - Loading available.

Approximately 20 years old - Mounted linkage - Lights are not working - Spool control type - For sale due to upgrade to a spread able for new shed layout - In daily use - Shreds, not chops, the straw so straw goes a long way - Can be mounted on a tractor or handler - Some spares available separately

C/w PTO shaft - C/W swath boards - Good working order - 2.8m cutting width - Recently serviced, ready to go - Loading available - Serial no. CC328AX287212

AMAZONE 4M POWER HARROW/DRILL COMBINATION - Working order - 4M working width - Quick change tines - RPAD 402 disc drill C/W tramlining control box and books - C/w packer roller - C/w PTO shaft - C/W drill removal stands - Unused in 2 years - Loading available

Mounted linkage - Swivel shute - Electric controls - Bluetooth controls all working - External controls not working

Lights working - Brakes working - Recent new lid - In working order - New PTO shaft - Good tyres

Recent full service with new belts, chain and bar - Can be seen working - Viewing and enquiries welcome

Year unknown - No packer roller or crumbler roller - Working order - Hydraulic folding - Has had new tubes welded on that carry the tines as the old ones rusty - Both tyres holding air (one is new) - Tines are in mixed condition - Loading available

New - C/w PTO - Loading available.

No PTO - Has not been used for the past year - Has had little use from new - Loading available.

Serial No: 50673867 - Lights and brakes untested - Just been resprayed and had all new fittings on the back - Selling as too small for vendors farm

Serial No: Vf69593747 - C/w PTO shaft - Good working machine - Owned since new - Done less then 250 acres - 4.3M Working Width

New Holland belt baler - Not used for 3 years - S/N: 992437 - Bale count 39500 - Variable bale size - PTO - Control box

Originally used for separating wood chips - Working

Metal tracks - Still in operation and comes with several buckets - Missing glass in door and bottom of windscreen

Machine summary: The Farmi CH381 is a heavy duty, high capacity tractor-mounted disc chipper designed for professional use, bioenergy production and large scale landscaping - It features and 380mm chipping capacity, a 3 point hitch - Capable of producing high quality chips (10-25mm) for heating with a high throughput for large scale operations - PTO driven, designed for tractors ranging roughly between 40KW and 115KW depending on load - Features a heavy, adjustable chute