All usable but all either have missing brackets and slightly bent

2 x 9' galvanised (both bent and missing brackets but usable - 1 x 8' metal (showing rust and slightly bent) -

Galvanised - With metal wheels - Both generally straight and good condition - One with bend in side and one showing rust in trough

All generally straight and good condition - All 15'' width at bottom

Vendor bought 10 years ago but has hardly used it - Stored in shed - Good tin work and all bars straight - Please note no bolts come with it - Marked A

Vendor bought 10 years ago but has hardly used it - Stored in shed - Good condition tin work and all bars straight - Please note no bolts come with it - Marked B

All bars straight and tin work sound - No connecting bars with it - Stored in shed

C/w 4 metal wheels - Stored inside - Trough is sound, double sided

Only one wheel present - Trough has no holes but showing rust - Stored inside

With 2 rubber wheels and 2 metal wheels - Stored inside - Trough has no holes but showing rust

47'' wide x 28.5'' deep x 35'' high - Bent lid - Please note this lot is part of a genuine dispersal on behalf of a deceased estate. There will be a loader tractor available for loading at the collection day which will be on Thursday 2nd April between 9:00am to 5:00pm. There is a viewing day on Friday 27th March between 9:00am to 5:00pm, the sale address is Exeland Farm, Bickleigh, Tiverton, EX16 8RA.

Has a few holes in the bottom

Has a pin prick holes in the sides

Spares or repair - Was previously used regularly to crush chicken feed up until 6 years ago, has not been used since - It has been sheeted down to keep dry and its still free moving - There is play in the grinder bearing so would need changing and it needs a general tidy up and oiling before use - All adjustments seem to be free moving so should be good project - Loading available

Old but working

40 ROLLS OF 750MM X 1700MM BLACK BALE WRAP - New on pallet - Still shrink wrapped - Barn stored - Assistance with loading available

Pallet fork lift points - Been used but ready to work

Pallet fork lift points - Been used but ready to work

Pallet fork lift points - Been used but ready to work

Pallet fork lift points - Been used but ready to work

Needs bolting together - Galvanised

Needs bolting together - Galvanised - Couple small holes

Galvanised with wooden floor - Good condition, needs a clean

Plastic - Good condition with ball valve

Galvanised - Needs new floor - Manual yoke

SFSO18/10 - Serial number: 000838 - Double sided - 10' long - Holds 750kg - Rings on ends for creep gates - Slight bend on roof lip - Water tight - No holes - Some surface rust

SFSO18/2 - Serial number: 001415 - 8' long - Holds 1250kg - Some surface rust - Good condition - Has only been used for 1 season

Galvanised - Belly strap - Rump bar - Solid wooden floor - Potentially needs new nose rope - Good condition

13' long x 4' wide x 34'' high - C/w bungs and ball cock - Please note this lot is part of an ongoing dispersal sale. The vendor has ceased milking and is relinquishing the tenancy. Please note there is a viewing day on Friday 27th March between 10.00am to 4.00pm. Please note that if you purchase this lot there will be a collection day on Thursday 2nd April, between 9.00am to 5.00pm. Sale address is Stallenge Thorne, Hockworthy, Wellington, Somerset, TA21 0NJ.

235cm x 118cm x 85cm high - C/w bungs and ball cock - Holds water - Please note this lot is part of an ongoing dispersal sale. The vendor has ceased milking and is relinquishing the tenancy. Please note there is a viewing day on Friday 27th March between 10.00am to 4.00pm. Please note that if you purchase this lot there will be a collection day on Thursday 2nd April, between 9.00am to 5.00pm. Sale address is Stallenge Thorne, Hockworthy, Wellington, Somerset, TA21 0NJ.

Good condition

Consist of 15 x 5' hurdles, Front & back gates - Good condition

Galvanised - In good working order - Approx 4 years old

Useable condition - Some bent bars from lifting

Spares or Repairs - Trough needs attention - Needs new wheels

Part cracked off - Approx 25'' x 25''

Approx 34'' round - C/w original bars but not attached

5' x 5' 5'' - Missing one bar and gate needs new hanging

Spares or Repairs - Manual yoke & scales - Weigh platform rotten

Good condition - 20 feed spaces - Very little use - No longer have use for it

Good condition - Selling as downsizing

Good condition - 20 feed spaces

Good condition - 2440mm long x 786mm wide x 675mm high - Vendor has 3 in identical condition

Good condition - 2440mm long x 786mm wide x 675mm high - Vendor has 3 in identical condition

Good condition - 2440mm long x 786mm wide x 675mm high - Vendor has 3 in identical condition

4 litres per side - Integral hangers with galvanised locking hooks

4 litres per side - Integral hangers with galvanised locking hooks

4 litres per side - Integral hangers with galvanised locking hooks

Double/twin Denis Brinicombe double ball molasses lick feeder - Purchased new (now surplus to requirements) - Used on a high health status farm - In good condition & has been cleaned

Variable sizes, around 4' wide - Assorted heights - Some have bucket holders

Approx 55' overall opened span - Consists of 4 x 12' gates plus back panel of trailer - Top link adjustment, manual folding - Some bent gate bars - Room to carry extra gates

All single calf size - C/W bucket holder fronts - 1 hutch is missing hanging bracket - Some signs of damage from wear and tear

Manual - 2 years use prior to vendor purchasing new RAPPA system with electronic scales - Working order - Good condition

Medium sized - Bespoke build by Yeovil Blacksmith in the 1960's - Needs new ply panels, but steelwork is ok - Has had 500kg+ animals in it

16' X 45'' - Slight bends but otherwise good condition

10' x 46'' - Galvanised - Good condition

10' x 46'' - Galvanised - Fair condition

Solid back

5 feeding station - Purchased as new & only used for one season (surplus to requirements as we use ad-lib cold milk buckets) - Used on a high health status farm - In good condition & has been fully cleaned - Teats & screws on attachments not included

5 feeding station - Purchased as new & only used for one season (surplus to requirements as we use ad-lib cold milk buckets) - Used on a high health status farm - In good condition & has been fully cleaned - Teats & screws on attachments not included

Galvanised - Due to the vendors limited availability, collection is preferred on Thursday 2nd April between 10am-3pm or by limited appointments thereafter.

Hook-over - Due to the vendors limited availability, collection is preferred on Thursday 2nd April between 10am-3pm or by limited appointments thereafter.

Auto locking yoke - Tyres holding air - Solid floor - Ratchet rump bar - In good order - Due to the vendors limited availability, collection is preferred on Thursday 2nd April between 10am-3pm or by limited appointments thereafter.

Fully galvanised - Belly scoop & rear rump bar - Transport wheels - C/w chip scoop - Chequer plate floor - Due to the vendors limited availability, collection is preferred on Thursday 2nd April between 10am-3pm or by limited appointments thereafter.

Trough solid - New floor and trough fitted approx 3 years ago - Approx 2T capacity - Some corrosion in places - Sale due to

Works well with Ritchie clamp - Side doors - Mesh floor - Timber construction - C/w galvanised head restraint - 4'10'' x 3'4'' overall

Good working order - C/w 4' galvanised half mesh hurdle and pin

Nearly all have float valves - 10 x standard - 1 x Fordham bowl

All have faults but perfectly usable - Only holes are drainage holes

Complete

Some previous repairs - Solid and strong

Very, very strong and well made - Homemade - Timber planks not included - Can be loaded for purchaser

Fix to gate or fence to place mineral buckets in - Some corrosion but still solid

JFC 180L fits into frame, can be anchored and towed - Used mostly for rotational strip grazing - Some corrosion

Marked as 1 - 500 gallon capacity - No ball valve - 11' long x 4' wide x 2'9'' high - C/w bung - Removed recently due to building upgrade - Loading available

Marked as 2 - 500 gallon capacity - No ball valve - 11' long x 4' wide x 2'9'' high - C/w bung - Removed recently due to building upgrade - Loading available

Marked as 3 - 500 gallon capacity - No ball valve - 11' long x 4' wide x 2'9'' high - C/w bung - Removed recently due to building upgrade - Loading available

Marked as 4 - 500 gallon capacity - No ball valve - 11' long x 4' wide x 2'9'' high - C/w bung - Removed recently due to building upgrade - Loading available

Works as it should

8' Diameter - Never used - Needs bolts to fix together - Fully Galvanised

8' Diameter - Never used - Needs bolts to fix together - Fully Galvanised

Very heavy duty - Sides are 61'' long x 41'' high -

New and unused - Heavy duty - C/w access gate and guillotine gate - C/w pins

6' x 3' - Good straight condition

Rusty but useable

2.5t approx capacity - Troughs repaired professionally in the last 16 months - Good tyres - Solid throughout - Sale due to workload reduction and now not needed - C/w hurdle carriers for creep gates - No lights

C/w 3 stalls - Mixer working when replaced by new machine last year - Also tested in January - Sold with 50 minimum collars

10' long polypropylene footbath

3'6'' wide - Fits over gate or hurdle

2' 6'' wide - Fits over gate or hurdle.

10' long sheep or cattle feed trough - Solid - No holes.