C/w drain hole

C/w brackets - Been stored away as no longer needed

Pressure boosting volume wash pump - Twin pump booster pump set with pressure vessel and control - 2000 control panel giving manual and automatic control with variable speed on pumps - Pumping capacity 11600 litres an hour at 25 bar - This pump has only been used a matter of weeks before the owner moved - Has been dry stored so in new condition - It is not being used as it is 2 phase and the owner only has single phase

C/w 2 single phase compressors (not pictured) - With own cooling system - Vendor will assist loading

Removed from Herringbone Milking Parlour. - No breaks in jars but one broken nib on bottom of one jar. - Would also be suitable as alcohol brewing jars. - Very think heavy glass.

Stainless steel - Removed from dairy after retirement - 20 plus years old - Good working order prior to removal, was very efficient at cooling milk quickly - Wall mounted, could also be used in the brewing industry.

C/w Storth control box - Operates 2 scrapers & motors, currently operated in reverse in current system (1 unwinds white other winds in 120 feed passages) - Electrics will be disconnected - Installed in 2020 and used up to recent weeks - Can be seen working - Buyer to remove & uninstall - Passages currently being scraped are 9' & 11' wide - Please note same video used to demonstrate full scraper system

No control box (sold separately with other scrapers in sale) - 2 scrapers & motors currently operated in reverse in current system (1 unwinds while the other winds in 120' feed passages) - Electrics will be disconnected - Installed in 2020 & used up to recent weeks - Can be seen working - Buyer to dismantle & remove - Passages currently being scraped 12' 6'' & 8' 11'' wide - Please note same video used to demonstrate full scraper system

1 Owner from new - Manufactured & installed in 2010 - Serial number ends in 035 - In use up until recent weeks & can be viewed working - Serviced by Lely, Yeovil on service schedule - New vacuum pump 2 years ago - Sale due to farm relocation - C/w Lely M4USE pre-milking collector - C/w control box - Weigh floor - Liquid feed option - Buyer to remove with lifting assistance from vendor

1 Owner from new - Manufactured & installed in 2010 - Serial number ends in 036 - In use up until recent weeks & can be viewed working - Serviced by Lely, Yeovil on service schedule - New vacuum pump 2 years ago - Sale due to farm relocation - C/w Lely M4USE pre-milking collector - C/w control box - Weigh floor - Liquid feed option - Buyer to remove with lifting assistance from vendor

Installed in 2010 - In use up until recent weeks

Stainless steel

Used for heat detection - Varying condition - In use until approx 1year ago

Measurements in photos

Good conditionh

Various lengths of pipe - 9 feed hoppers - 2 drive motors and switch gear

Fullwood oil keeper & plastic receiver - Single phase - Weg motor was in use till May 2025

On fullwood frame & receiver with oil keeper with weg motor - Single phase - Was working till May 2025

C/w compressor for cooling was in use till April 2025 - Good working order

20.5'' Internal diameter - 13.5'' Internal depth - Suitable for a multitude of uses - Made from durable, strong plastic - Some will require some cleaning/washing

20.5'' Internal diameter - 13.5'' Internal depth - Suitable for a multitude of uses - Made from durable, strong plastic - Some will require some cleaning/washing

21'' x 2'' - Does have 2 cracks

In bags from Shire Equestrian

Mixed stirrups, girth, muzzles, ladder, whiteboards and foal feeder

Came out of the Dairyland collection - Hubs of the wheels are weaker than the rest of the trailer - It has an A frame on it so can be towed - Delivery can be arranged with vendor

Good condition - 2 nest boxes - 2 perches - Suitable for up to about 8 hens - Roof easily removable for cleaning - Length 122cm, width 95cm, height 112cm

C/W 2 drinkers (1 small, 1 large) - Good working order - Some surface rust - Metal grid missing - 2 small nuts and bolts needed if training a chicken to use the feeder - Rat and bird proof

C/W 2 metal drinkers - Good working order - Some surface rust - 2 small nuts and bolts needed if training a chicken to use the feeder - Rat and bird proof

42'' long x 28'' wide x 30'' high - Plastic tray floor - Side door - Collapsible - Please note a collection morning will be held for this lot on Tuesday 16th December 2025, between 10am and 1pm. This lot MUST be collected on this date.

Slightly scratched on the seat

In good condition - Very little use

Body is 1.48m x 44cm x 1.1cm - Total length including head and neck is 2.25m - Solid - Well built - C/w rope, mane and tail - Could be used as a training horse

Horse/pony washer - C/w instructions - Has had little use - Good bit of kit - Happy to pack if winner arranges courier after funds have cleared

14 x 8' panels, plus the 4' gate - In good condition - A hand full of homemade pins but fully functional - Only for sale as we no longer have horses

C/w tow hitch & jockey wheel - Pump & mixer - Selling as we upgraded to a larger model - Staining on the inside is from someone trying to clean it with fam 30

2' x 15'' x 13''

Approx measurements - Split into two sections with a bed, internal run and galvanised panels for an external run too - This lot is part of an unreserved genuine dispersal of a smallholding's livestock and machinery equipment. The vendor having moved away and ceased keeping livestock.

Brookridge timber - New roof sheets - Buyer to dismantle and take away

To inc: Lead rope, long strip lead - Hay net - Dung scoop rake

Mixture of bits including 2 rugs, 1 has been chewed a bit

Bench seat - Tyres holding air - Brakes working - Barn stored - Some corrosion

Make unknown - Bench seat includes terrier box - Tyres holding air - Barn stored - Some corrosion

Based on 4cv chassis with sprung axles - Harness takes up to 15.2hh pony - Wooden bench seat with storage underneath - Barn stored - Requires some TLC - Some woodworm

112CM x 50CM - New with original box - Additional pegs and repair kit

All 300cm x 150cm high, with wooden frame and wire mesh - All complete usually kept inside and not mesh used for several years - Used as a release pen for english partridge - Plus one 300cm door pen and one 300cm pen panel, both are damaged but useable - Please note this lot is part of a genuine phased dispersal the vendor is selling the farm. There will be a collection day on Friday 12th December between 10.00AM to 4.00PM.

Inc: A, B, C ,E, F, H, K & M (set in one ground) - All good condition - Made by Stubbs, England - Please note this lot is part of a genuine phased dispersal the vendor is selling the farm. There will be a collection day on Friday 12th December between 10.00AM to 4.00PM.

Metal - Please note this lot is part of a genuine phased dispersal the vendor is selling the farm. There will be a collection day on Friday 12th December between 10.00AM to 4.00PM.

Dog cage is 90cm x 60cm x 67cm high - Workmate has rust but useable - Please note this lot is part of a genuine phased dispersal the vendor is selling the farm. There will be a collection day on Friday 12th December between 10.00AM to 4.00PM.

Head collars are all different sizes (calf, yearing and adult) and mostly unused - Plus 4 used ropet - Please note this lot is part of a genuine phased dispersal the vendor is selling the farm. There will be a collection day on Friday 12th December between 10.00AM to 4.00PM.

Includes full length electric conveyor to move eggs to collection point at one end - Also comes with control system to operate mesh guards to close off all boxes to prevent roosting - All matting sections present and useable, but condition vary - Suitable for 4000 free range hens - Second, identical system also listed - Dismantled and ready to collect

Includes full length electric conveyor to move eggs to collection point at one end - Also comes with control system to operate mesh guards to close off all boxes to prevent roosting - All matting sections present and useable, but condition vary - Suitable for 4000 free range hens - Second, identical system also listed - Dismantled and ready to collect

600 x 1000mm - Holes are 22 x 36mm - Sit on 5mm wide steel supports (not supplied) - Dismantled and ready to collect - Ideal for a variety of uses, including stabilizing gateways, etc

600 x 1000mm - Holes are 22 x 36mm - Sit on 5mm wide steel supports (not supplied) - Dismantled and ready to collect - Ideal for a variety of uses, including stabilizing gateways, etc

C/w saddles for 20MM pipe

C/w saddles for 20MM pipe

House is 314cm long x 120cm wide - C/w feeding & roosting area - It is old & will need some attention as hinges broken and some timber weak - Please note this lot is part of a genuine phased dispersal the vendor is selling the farm. There will be a collection day on Friday 12th December between 10.00AM to 4.00PM.

240v - Good working order - Please note this lot is part of a genuine phased dispersal the vendor is selling the farm. There will be a collection day on Friday 12th December between 10.00AM to 4.00PM.

Front panel with 2 pedestrian doors - 3 herras fencing pannels

2 front sections with doors - Must be removed from site by buyer by Saturday 20th December as property has been sold - Both fronts are approx 3M wide - Both side and central divisions are approx 3M to make 3M x 3M stable - Some obvious wear on central division - Vendor will dismantle and remove ready for collection

68cm internal width - 50cm high

Marked 53 - Fridges - Porta potties - Toilets - Sink units - Caravan doors - This lot is part of an unreserved clearance sale from a reclaimed storage unit. - Viewing of all lots will be available on Wednesday 3rd and Friday 5th of December between 10AM and 1PM. - Collection of all lots must be made on either Friday 12th, Saturday 13th or Thursday 18th December between 10AM and 3PM. - No items or vehicles have been tested and all items should be treated as untested, the auctioneers have had limited access to lots so buyers should satisfy themselves of descriptions and condition.

Marked 68 - Lots of wheel trims, CB and car radios, oils and liquids - This lot is part of an unreserved clearance sale from a reclaimed storage unit. - Viewing of all lots will be available on Wednesday 3rd and Friday 5th of December between 10AM and 1PM. - Collection of all lots must be made on either Friday 12th, Saturday 13th or Thursday 18th December between 10AM and 3PM. - No items or vehicles have been tested and all items should be treated as untested, the auctioneers have had limited access to lots so buyers should satisfy themselves of descriptions and condition.

Marked 91 - Believed VW beetle and transit bumper - This lot is part of an unreserved clearance sale from a reclaimed storage unit. - Viewing of all lots will be available on Wednesday 3rd and Friday 5th of December between 10AM and 1PM. - Collection of all lots must be made on either Friday 12th, Saturday 13th or Thursday 18th December between 10AM and 3PM. - No items or vehicles have been tested and all items should be treated as untested, the auctioneers have had limited access to lots so buyers should satisfy themselves of descriptions and condition.

Marked 86 - Light lenses, manual winches etc - This lot is part of an unreserved clearance sale from a reclaimed storage unit. - Viewing of all lots will be available on Wednesday 3rd and Friday 5th of December between 10AM and 1PM. - Collection of all lots must be made on either Friday 12th, Saturday 13th or Thursday 18th December between 10AM and 3PM. - No items or vehicles have been tested and all items should be treated as untested, the auctioneers have had limited access to lots so buyers should satisfy themselves of descriptions and condition.

Marked 110 - Spares etc - This lot is part of an unreserved clearance sale from a reclaimed storage unit. - Viewing of all lots will be available on Wednesday 3rd and Friday 5th of December between 10AM and 1PM. - Collection of all lots must be made on either Friday 12th, Saturday 13th or Thursday 18th December between 10AM and 3PM. - No items or vehicles have been tested and all items should be treated as untested, the auctioneers have had limited access to lots so buyers should satisfy themselves of descriptions and condition.

Marked 112 - Bench, double and single seats - This lot is part of an unreserved clearance sale from a reclaimed storage unit. - Viewing of all lots will be available on Wednesday 3rd and Friday 5th of December between 10AM and 1PM. - Collection of all lots must be made on either Friday 12th, Saturday 13th or Thursday 18th December between 10AM and 3PM. - No items or vehicles have been tested and all items should be treated as untested, the auctioneers have had limited access to lots so buyers should satisfy themselves of descriptions and condition.

Marked 114 - Approx 3m x 1.9m - This lot is part of an unreserved clearance sale from a reclaimed storage unit. - Viewing of all lots will be available on Wednesday 3rd and Friday 5th of December between 10AM and 1PM. - Collection of all lots must be made on either Friday 12th, Saturday 13th or Thursday 18th December between 10AM and 3PM. - No items or vehicles have been tested and all items should be treated as untested, the auctioneers have had limited access to lots so buyers should satisfy themselves of descriptions and condition.

Marked 115 - Tanks, lights, interiors, sink etc - This lot is part of an unreserved clearance sale from a reclaimed storage unit. - Viewing of all lots will be available on Wednesday 3rd and Friday 5th of December between 10AM and 1PM. - Collection of all lots must be made on either Friday 12th, Saturday 13th or Thursday 18th December between 10AM and 3PM. - No items or vehicles have been tested and all items should be treated as untested, the auctioneers have had limited access to lots so buyers should satisfy themselves of descriptions and condition.

Spares or repairs - Marked 143 - A+ engine - Non runner - No reg or V5C - Flat tyres - This lot is part of an unreserved clearance sale from a reclaimed storage unit. - Viewing of all lots will be available on Wednesday 3rd and Friday 5th of December between 10AM and 1PM. - Collection of all lots must be made on either Friday 12th, Saturday 13th or Thursday 18th December between 10AM and 3PM. - No items or vehicles have been tested and all items should be treated as untested, the auctioneers have had limited access to lots so buyers should satisfy themselves of descriptions and condition.

Came off old trailer

Has been professionally welded - Working order

8' x 18'' long x 6' high and 18'' deep - With extendable duct racking on longer side - C/w microwave - C/w 6 plastic cubby holes - Otherside is 7'8'' long - Bri-Stor systems

Fits some John Deere's - Removed from 182 HP engine - Not necessarily at 4000 hours approx

Various tractor parts and spares

Complete but in bits - Has No.1 cylinder piston issue

As per measurements & condition in photos.

Seat is 20'' wide

Came off 68 plate Merlo at 2,000 hours - C/w hydraulic locking pin - Merlo brackets - Tight

Unknown what sprayer they are for

Well made with pin to attach implement

Spares or repairs - Fits Massey Ferguson 64 and 77 series large frame tractors - Wear on the hitch - Includes new clevis drawbar

Land Rover series pto set from what I can work out this is a earlyish unit, these don’t come up very often - As can be seen in the pictures very good condition no breaks, cracks or welds on any of the cases - I’ve had the bearing covers off the rear pto unit and both bearings are in very good condition timkin bearings nice and tight with no play in the box 6 spline shaft and the cover which will be put back on. Comes with a good centre pto take off from the gear box tight with no play in it dog in good condition. Comes with a spare centre pto take off moves a little but doesn’t fully spin not sure why. Comes with the engagement lever for in the cab.

Been reconditioned and then never fitted

Came off a CX80C - 600mm wide - New nuts and bolt required

37'' extends to 54'' - 350mm square shaft - All universal joints free - 540 spline

New and used - Mainly Land Rover/Wildcat spares

Headstock T gearbox from Major offset topper - Turns freely - Approx ratio 1:8:1

Turns freely - Has new shaft fitted shortly before removed from topper - Approx ration 1:1:5

Straight and tidy canopy with up and over solid mesh door - Size: 48'' long x 62'' wide x 31'' high - C/w bolts

Turns freely - Approx ration 1:1:5

Spare or repairs - Blade and holder to fit onto gearbox

Spares or repairs - Believed to come off a Hi-spec topper