For slurry tanker - MZ Swivel - Single acting gate valve - Made last year and done very little work

Small crack on one corner of one panel - No fixing brackets included

In good working order - Has done 250 acres worth of grass silage this year with no problems - Will need one tine re-fitting

12 inch

On 45mm pins - One 700mm - One 550mm

On 30mm pins - Approx 3 tonne - 4ft wide

30mm pins - 9inch wide

30mm pins - 12inches wide

30mm pins - 9inches wide

30mm pins - 9inch wide

30mm pins - 12 inch wide

30mm pins - 3ft wide

Needs some welding at back of the bucket as shown , otherwise solid bucket

Pin & cone brackets - 2m wide - Missing both hydraulic pipes - 3 Rams

For 3 point linkage - Has been bent in the past but doesn't affect its use - Last picture shows in use with bale

Euro 3/Quicke number 3 pin size

C/w Pins - Very little use

Round and square bales - Euro brackets - Good condition - New pipes not long ago

C/W brackets and cable joystick - Should fit any (6 cylinder - 66-69) (10 to 30 series) tractor

On Merlo brackets - Could do with some new spikes

Spares or repairs - All tines present and straight - Rusty - No rams or pipework - Pin & cone brackets

BIG DUTCHMAN 2500 BIRD INTERNAL EGG LAYING SET UP - 2 tier rollaway nest boxes with egg belts - 5 8' x 5' nest box sections - Complete set up to go in a shed - C/W drinking nipple lower chain feed system, dimmable lighting system with timber control box, 3 extraction fans and hoods, winch system for feed to raise/lower and electric control box. - All nest boxes go on legs with plastic Dutchman slats with stations to sit on - C/W 8' and 4' walkways through the nest boxes - C/W new big Dutchman spare feed motor - Vendor bought 18 months ago to put up in shed, but has never done so (some pictures show the set up except when purchased, nearly all dry stored since being bought).

Approx 2.50m long x 1.10m wide - Front feed cover very bent - Significant rust but trough is sound and feeder is generally straight - Pallet fork attachments

Approx 2.50m long x 1.10m wide - Front feed cover very bent - Significant rust but trough generally solid and feeder is generally straight - Top lid bent

Approx 2.50m long x 1.10m wide - Front feed cover very bent - Significant rust but trough generally solid and feeder is generally straight - Top lid rusted

Marked 1 - Generally straight (odd bend in top lip)

Marked 2 - Generally straight

Marked 3 - Showing rust but trough has solid floor

Marked 4 - Showing rust but trough has solid floor

Marked 1 - Trough is 7'' deep - All straight

Marked 2 - Trough is 7'' deep - All straight

Marked 3 - Trough is 7'' deep - All straight

Marked 4 - Trough is 7'' deep - All straight

Holders only (buckets shown in picture for sale purpose only) - Holders hold 5 litre bucket

Holders only (buckets shown in picture for sale purpose only) - Holders hold 5 litre bucket

Holders only (buckets shown in picture for sale purpose only) - Holders hold 5 litre bucket

Holders only (buckets shown in picture for sale purpose only) - Holders hold 5 litre bucket

C/w 20 x 7' hurdles - C/w brand new winch - Aluminium lightweight

16cm high x 32cm deep x 57cm across

Spares or repairs - 8' x 7' - Opening roof - Some rust - Roof sound

Spares or repairs - 8' long - Some rust holes in trough - Wheels good - Hinged roof (1)

Spares or repairs - 8' long - Some rust holes - Wheels good - Hinged roof (2)

Spares or repairs - 8' long - Some rust - Wheels good - Hinged roof (3)

Spares or repairs - 8' long - Some rust - Wheels good - Hinged roof (4)

9' - Some rust & bends (1)

8' - Some rust & bends (2)

8' - Some rust & some ends missing (3)

8' - Some rust & some ends broken (4)

9' - Some rust & bends (5)

9' - Some rust & bends (6)

8' - Some rust & bends (7)

8' - Some rust & bends - Some ends missing (8)

9' - Some rust & bends - One end missing (9)

5' x 6'' diameter - 3' high - Galvanised - Good condition - Bolted sections (1)

5' x 6'' diameter - 3' high - Galvanised - Good condition - Pinned sections (2)

5' x 6'' diameter - 3' high - Galvanised - Good condition - Pinned sections (3)

Serial No: FP250 - Very little use - Surplus to requirements

In good condition

8' x 5' - No holes in feed trough - Front drops down - One bar is missing and one is bent, others all generally straight - This lot is part of a dispersal on behalf of the late Ron and Ann Moon. Nearly all the lots have been stood and unused for the past 10 years. Please note that there will be a collection day for all lots on Saturday 18th October between 10.00am and 4.00pm.

Wooden floor - 3 point linkage - Doors & yoke working order - This lot is part of a dispersal on behalf of the late Ron and Ann Moon. Nearly all the lots have been stood and unused for the past 10 years. Please note that there will be a collection day for all lots on Saturday 18th October between 10.00am and 4.00pm.

All 3' high - This lot is part of a dispersal on behalf of the late Ron and Ann Moon. Nearly all the lots have been stood and unused for the past 10 years. Please note that there will be a collection day for all lots on Saturday 18th October between 10.00am and 4.00pm.

Metal with wooden floor - Generally straight - This lot is part of a dispersal on behalf of the late Ron and Ann Moon. Nearly all the lots have been stood and unused for the past 10 years. Please note that there will be a collection day for all lots on Saturday 18th October between 10.00am and 4.00pm.

C/w gascoignes weigh scale - Wooden floor - This lot is part of a dispersal on behalf of the late Ron and Ann Moon. Nearly all the lots have been stood and unused for the past 10 years. Please note that there will be a collection day for all lots on Saturday 18th October between 10.00am and 4.00pm.

33'' diameter - Missing all dividing bars - This lot is part of a dispersal on behalf of the late Ron and Ann Moon. Nearly all the lots have been stood and unused for the past 10 years. Please note that there will be a collection day for all lots on Saturday 18th October between 10.00am and 4.00pm.

No plumbing accessories - This lot is part of a dispersal on behalf of the late Ron and Ann Moon. Nearly all the lots have been stood and unused for the past 10 years. Please note that there will be a collection day for all lots on Saturday 18th October between 10.00am and 4.00pm.

With regulator but no gas bottle - This lot is part of a dispersal on behalf of the late Ron and Ann Moon. Nearly all the lots have been stood and unused for the past 10 years. Please note that there will be a collection day for all lots on Saturday 18th October between 10.00am and 4.00pm.

This lot is part of a dispersal on behalf of the late Ron and Ann Moon. Nearly all the lots have been stood and unused for the past 10 years. Please note that there will be a collection day for all lots on Saturday 18th October between 10.00am and 4.00pm.

Marked express dairy - Marked No 1 - C/w lid - This lot is part of a dispersal on behalf of the late Ron and Ann Moon. Nearly all the lots have been stood and unused for the past 10 years. Please note that there will be a collection day for all lots on Saturday 18th October between 10.00am and 4.00pm.

Marked express dairy - Marked No 2 - C/w lid - This lot is part of a dispersal on behalf of the late Ron and Ann Moon. Nearly all the lots have been stood and unused for the past 10 years. Please note that there will be a collection day for all lots on Saturday 18th October between 10.00am and 4.00pm.

Marked Express Dairy - Marked No 3 - C/w lid - This lot is part of a dispersal on behalf of the late Ron and Ann Moon. Nearly all the lots have been stood and unused for the past 10 years. Please note that there will be a collection day for all lots on Saturday 18th October between 10.00am and 4.00pm.

33'' diameter - 4 dividing bars missing - This lot is part of a dispersal on behalf of the late Ron and Ann Moon. Nearly all the lots have been stood and unused for the past 10 years. Please note that there will be a collection day for all lots on Saturday 18th October between 10.00am and 4.00pm.

Bent and missing one strut - Trough is solid - This lot is part of a dispersal on behalf of the late Ron and Ann Moon. Nearly all the lots have been stood and unused for the past 10 years. Please note that there will be a collection day for all lots on Saturday 18th October between 10.00am and 4.00pm.

4 poly wire and 4 steel wire - 6 on reelers - This lot is part of a dispersal on behalf of the late Ron and Ann Moon. Nearly all the lots have been stood and unused for the past 10 years. Please note that there will be a collection day for all lots on Saturday 18th October between 10.00am and 4.00pm.

33' high - Pig tail tops - This lot is part of a dispersal on behalf of the late Ron and Ann Moon. Nearly all the lots have been stood and unused for the past 10 years. Please note that there will be a collection day for all lots on Saturday 18th October between 10.00am and 4.00pm.

With full sheep decks and cattle dividing gate - Done very little work

This lot is part of a dispersal on behalf of the late Ron and Ann Moon. Nearly all the lots have been stood and unused for the past 10 years. Please note that there will be a collection day for all lots on Saturday 18th October between 10.00am and 4.00pm.

4'' x 4'' galvanised posts - box iron approx 6' - 3 x hanging posts with hinges - 1 x latching post - Heavy duty

9'2'' long x 50'' high - Straight & good - C/W latch & hinges

9'2'' long x 50'' high - Straight and good. Slight rust on bottom rail - C/W latch & hinges

9'2'' long x 50'' high - Straight and good. C/W latch - one hinge missing

For race or similar - As new, never been fitted or used due to change in circumstances - Fully galvanised

Approx 2m long - Hangers need attention - No assistance with loading

1.5m long - 25cm x 15cm (thicker at base) - No assistance with loading

Coned centres - On castor wheels - 1.6m approx in diameter - Approx 75cm deep

2 x 12' long - 1 x 14' long (has a curve to it) - 1 x 12' has damaged bottom bar but other two are strong and solid

Needs new lid but quite good bins inside - 6' long x 2' wide

Used condition

Very heavy cattle grid in 2 parts - Approx 10 foot long and 4 foot wide each piece - Buyer will need some sort of lifting equipment - In good condition

Front and rear gates - Wheels and handles - Lugs to incorporate in race - 200kg capacity - Good working condition

C/w shedding gate - Left or right hand - Width adjustable for different sized sheep - Linkage adjustable for different weight of operator - Good working order

Bought but never used - In good condition

Hutch complete with all the accessories - Brand new - Never used

Hutch complete with all the accessories - Brand new - Never been used

Good condition

Good condition

Spares or repairs - C/w electric winch (working order) -

For pigs/sheep