New old stock - See pictures for details

Pallet box full of random bits and pieces - Lots of John Deere

New old stock by Vapormatic - Fits 6 cylinder engine

New, old stock - Fits several different engines - See parts number in photos

Qty of new vaderstad drill cultivator parts

New vapormatic old stock

Vapormatic Vpe1050 - Fits Fiat 411, 415, DT 421, 431 - New old stock

New old stock - Vapormatic

To fit Massey Ferguson 155, 158 165, 65, 765 - New old stock - Vapormatic

New old stock - Made By vapormatic

Genuine CNH part - Water bottle c/w washer pump

All parts are new old stock - Parts to fit Lely Splendimo and Optimo machines

New old stock never used/fitted

Worked many years ago - Has not been used it since - Stored in a dry workshop

Contains 4 side posts, 2 corner posts, 4 short boards, 2 x long boards for the 18' drop side - One tail board

Spares or repair - 3 point linkage - Hydraulic

Believed to be off L200/Shogun

Spares or repair

C/w brackets - 4 nozzles

C/w tubes (hold air) - Approx 10% tread - Came off a Massey Ferguson 6480 tractor

Size: 600/65 R38 - Came off a Massey Ferguson 6470 tractor - Both hold air - 10% tread

Surplus to requirements as present car has different size wheels - All good no chips or bends on alloy and tyre is in good condition - Only kept as a spare previously

All 6 stud - Removed from Linde.

Continental pair of tyres - Believed to be sound.

As new - One rim has a chip in paint work otherwise as new

4 x 4 stud wheels with 4.5'' PCD on 195/65 R15 tyres with varying tread - 1 x 5 stud space saver wheel on pirelli 115/85 R18 tyre with good tread - 1 x 175/65 R14 tyre with good tread

Came off a 35 but will fit 135 & other similar sizes makes & models of the same era - Tyre has around 10% tread but hardly any perishing

Spares or repairs - Full set of David Brown Red 990 wheels and tyres - Centre very little rust - Rear tyres useable - Front tyres worn

7.00/12 - Good condition

No previous repairs or punctures

Tyres have very good tread - To suit DAF LF or similar - Purchased as spares and never really used.

Couple of cleats missing on one side but the other has all cleats.

1 x as new 1 x had very little use - Can be loaded - Vendor can send list of compatible machines

Unused.

C/w rims - All with very good tread - Full set

Size: 460/70 R24 - Low tread - Removed from 72 Reg telehandler on 2500 hours - All held air fine before removal

10-20% tread - Came off Massey Ferguson 7480 rears - One has small cut but both tyres useable (holding air)

10% tread - Came off Massey Ferguson 7480 fronts - Both useable (holding air)

1 10-20% tread and 1 10% tread - Came off Massey Ferguson 7618 fronts - One with less tread has had a repair both useable (holding air)

Rears 18.4 R46 - Fronts 18.4 R30 - Front tread approx 60-70% - Rear tread approx 40-45% - Removed from NH T7.270 but believed to fit NH T6 and Case Puma

Reasonable tread - unknown if holds air

Approx 90% tread - C/w 10 stud rims

For silage pit covers - No previous repairs or punctures

Little tread left but still useable - C/w 10 Stud rims

Useable

Complete

Axles are 52'' wide - wheels are 8'' and 10'' wide

Removed from a Marshall spreader - Good tread - were holding air when removed

Removed from a Marshall spreader - were holding air when removed - reasonably good tread - 1 cut as pictured but holding air

6 Stud - holding air with reasonable tread

Condition unknown (vendor unsure if holds air) - Came off McCormick tractor - 20% tread

Condition unknown (vendor unsure if holds air) - Came off JCB telehandler - 10% tread

New and never fitted to tractor - No perishing

Standard 6 stud - 500/60 R22.5

235/70 R16

16.9/14-30 - Came off Fiat 580

C/w some feet - No clamps - Varying condition but all appear usable.

C/w some feet - No clamps - Varying condition but all appear usable.

All unused

14 galvanised gatemate medium and large auto gate latches

All 4'' and 6''

Unused

Unused

Double strap bands (galvanised) - 5'', 12'', 24''

Plus some gate accessories

Unused - Galvanised

Hunting locks (straight and cranked handle)

Galvanised

Hangers, hinges, latches, etc

Needs new internal battery but otherwise working when last used

Needs new internal battery but otherwise working when last used

Working

4-5 larger (6-7'' tops) - Varying condition

2 x 50m approx - 1 x 25m approx - 1 x 20m approx - All in very good condition apart from very minor odd fault

75 x 600MM - Brand new never been used

Appprox 40 - 3' height

Approx 300m of barb wire - 40mm staples

Designed to hold reels

Stock netting - Unusual roll

8' 6'' total length

Varying amounts on reels but mostly shorter lengths - 25+ part reels - High tensile.

Inverted hangers - Cut off when removed - 6'' square

10 shown in photo but being sold in 2 lots - All in equally as good condition - Latching/fixing lugs on each side - 4'' square

10 shown in photo but being sold in 2 lots - All in equally as good condition - Latching/fixing lugs on each side - 4'' square

Used but still useable again

Used but still useable again - Mostly good points & tops - 3'' - 3.5'' tops - Odd slight split - Please note one set of pictures has been taken of an average sample to depict multiple lots & collection is on a first come first serve basis

Used but still useable again - Mostly good points & tops - 3'' - 3.5'' tops - Odd slight split - Please note one set of pictures has been taken of an average sample to depict multiple lots & collection is on a first come first serve basis

Used but still useable again - Mostly good points & tops - 3'' - 3.5'' tops - Odd slight split - Please note one set of pictures has been taken of an average sample to depict multiple lots & collection is on a first come first serve basis