C/w pipes - Starts, runs and works

Adjustable height - Strong and sound

C/w hanger - Solid timber

Made by Coronet Tool Co - C/w mobile cupboard/work table is mounted on - Had little use - Working - C/w manual - 1 owner from new (had little use)

110V - Variable speed - 3 tool attachments - C/w carry case - Working

Mixed sizes - 2 bundles

240V - Recent new drive belts - 10 new sanding belts & some spares - Working

Starts & works - Honda GX160 5.5HP engine - 14'' wide plate

Unused - C/w case

1'' ratchet gun - Working - For lorry wheel nuts or similar

Model: BL105B Stephill - Working & has output

Honda powered - Starts & works

240V - Working

C/w transport trailer - Lister diesel engine - Not used in recent years but had replacement drive couplings fitted and only used lightly since - Metal trailer bed & tool chest - Tyres holding air with tread - No lights/brakes

Working - C/w vintage hay knife & crook

C/w carry case - Not used recently

Manual dispensing pump - No leaks

HD pipe - C/w wash gun - Approx 2cm internal

C/w mesh cases and lids

Please note needs new blade as current one is cracked otherwise working order - C/w PTO - Not used for 10 years

C/w lid - Holds water - Bunghole at bottom - Approx 6' high

C/w belt - Heavy duty - Barn stored - C/w blade

Inc road lights, jerry can, petrol can, pipe fittings, ducting, silicone, guttering - Table in good condition

2 x 4m x 50m - 1 x 8m x 50m

Round baler twine approx 20 spools of varying condition

5 x 2m high by 3,5m wide Heras fence panels in good condition - Only used once - All straight, come complete with 6 rubber feet and 5 joining clamps

Ex silage pit panels in various condition - Been stored inside

Good condition

3 solar panels, width 500mm, length 1000m - Complete with Krieger 2000w inverter - Eco-worthy solar power controller and 2 batteries

12 steel bollards - Heavy duty - 800mm high approximately

It is in working order

Spares or repairs - Does not pump, possible new seals

16 x 20L drums

C/w built in 12v pump

With lockable door - Bolts together - Fibre glass coated - C/w roof

17 x 11.5' approx, 2 slightly twisted - 3 x 7' approx - 3 x 1m approx

In good condition

New old stock

Large box of random new parts - Mostly John Deere

C/w patio cleaner - In working order

20 Litre - In good working order - Dry stored

Spares or Repairs - Believed to require a new switch

Spares or Repairs - 4'', 6'' & 8'' augers - Needs a service

Very strong alloy ramps with rollers - Very well built - Have been extremely useful but no longer required

Ideal for the back of the van or pick up truck or in a workshop

In used condition but still good

C/w 4 shelves - Solid

C/w bottom shelf - Can be delivered for cost of fuel - For cutting fabric

Interior pipe is mix of 20MM and 22MM - Never used - Believed 50M rolls

Table is 2.63M x 84CM x 89CM tall - Inc 3 snow shovels, pneumatic pipe, guttering fixtures and fittings, SS door handles and other stainless goods

In good working order

Good blade - Petrol

Not been used - 3.00-4 wheel

Not been used - 3.00-4 wheel

56lb is Corderoy - 28lb is Avery

Folding - Solid

Working order - Has been used all winter - Steel blades - This lot is part of a genuine part dispersal due to ill health & loss of ground

Working - This lot is part of a genuine part dispersal due to ill health & loss of ground

C/w 6 discs for varying seed rate - Believed working - This lot is part of a genuine part dispersal due to ill health & loss of ground

C/w dispenser - Works off internal battery - Tank will be empty

2200 watt - 16amp plug - Hardly used (bought new) - 3hp dust collector

C/w 3 keys - 1.2 meters deep & 1 metre wide & 23cm high

Dard 1943 and 1975 - Both with war department symbol

All with lids but no stands

C/w 2 mounting brackets - 1 has a soot catcher

Complete - Always dry stored

With floating table - 3 phase - Motor was removed/ reconditioned in 2021 - Takes up to 1'' chisel - Working order - Genuine reason for sale as closed the business

3 phase - The throat depth is 13'' - Cutting height is 10'' - Genuine reason for sale as closed business

Kerosene - Model: AB1258 - Electric 240 V - Hardly used - Very good condition

Takes 100mm outlet ducting pipe - Model No: 01956 - Electric 240V - Good working order

1 double extending (each 2.5m long) - 1 single over 14' long

Work light is telescopic and 110W - All working order

Overall size 620mm wide x 1800mm long x 925mm high - Takes 100m outlet ducting pipe - Needs a duct extractor to go with it - Good condition - Unused

2 Rolson 8'' - 1 Palermo and 1 malleable

Wide angle nails - To fit nail gun

Battery operated - Used

Inc: Coach bolts, concrete coach screws, rawl bolts, etc

Inc: coach bolts, coach screws, wood screws, dome nuts, etc

Inc: coach bolts, coach screws, dome nuts etc

In box - C/w charger and 3 batteries

Used - C/w isolator 3 phase

Complete

Electric 240V - Working order - C/w spare sanding discs - Model: A512CTJ - C/w tilting bed

1 Hitachi belt sander (5B10V2) - 1 Bosch PK0 20-82 planer - 1 Bosch PK5 46 circular saw - All working order

Marked as 32 - Untested - C/w hose & lance - This lot is part of a genuine unreserved dispersal sale on behalf of the executors of the late Mr L Spiller. A viewing day where all lots will be available to view will be held between 10am - 4pm on Friday 16th May. A collection day where all lots should be collected and a telehandler will be on-site to assist with loading will be held on Friday 23rd May.

Marked as 38 - C/w tap outlet - 220 printed on it - This lot is part of a genuine unreserved dispersal sale on behalf of the executors of the late Mr L Spiller. A viewing day where all lots will be available to view will be held between 10am - 4pm on Friday 16th May. A collection day where all lots should be collected and a telehandler will be on-site to assist with loading will be held on Friday 23rd May.

Marked as 39 - C/w top outlet - This lot is part of a genuine unreserved dispersal sale on behalf of the executors of the late Mr L Spiller. A viewing day where all lots will be available to view will be held between 10am - 4pm on Friday 16th May. A collection day where all lots should be collected and a telehandler will be on-site to assist with loading will be held on Friday 23rd May.

Marked as 40 - Scraper, fork, brush, spade, etc - This lot is part of a genuine unreserved dispersal sale on behalf of the executors of the late Mr L Spiller. A viewing day where all lots will be available to view will be held between 10am - 4pm on Friday 16th May. A collection day where all lots should be collected and a telehandler will be on-site to assist with loading will be held on Friday 23rd May.

Marked as 42 - This lot is part of a genuine unreserved dispersal sale on behalf of the executors of the late Mr L Spiller. A viewing day where all lots will be available to view will be held between 10am - 4pm on Friday 16th May. A collection day where all lots should be collected and a telehandler will be on-site to assist with loading will be held on Friday 23rd May.

Marked as 42 - All untested so sold as scrap - This lot is part of a genuine unreserved dispersal sale on behalf of the executors of the late Mr L Spiller. A viewing day where all lots will be available to view will be held between 10am - 4pm on Friday 16th May. A collection day where all lots should be collected and a telehandler will be on-site to assist with loading will be held on Friday 23rd May.

Marked as 45 - Cardboard centres - Dry stored - This lot is part of a genuine unreserved dispersal sale on behalf of the executors of the late Mr L Spiller. A viewing day where all lots will be available to view will be held between 10am - 4pm on Friday 16th May. A collection day where all lots should be collected and a telehandler will be on-site to assist with loading will be held on Friday 23rd May.