Working - Approx 8'' diameter - Guard present but damaged - Old style plug

Corn dryer works - 11 x vents - Some piping

Both for spares or repairs

Spares or repairs - Empty - For spares/repairs (centre shaft snapped) - Can be loaded

C/w PTO shaft - Some small holes in tub

Reasonable web/matting - Solid lead bar

9 legs - Solid metalwork

6' working width - Working

New front wheel and tyre supplied but not fitted - Other tyres should hold air - Appears complete

Can be offset - Some rust on sides and cover but useable - Working when last used - C/w PTO shaft

C/w PTO shaft (needs new guard) - Tines and springs mostly good - Working

C/w PTO - Manual shut off working - Freely spinning - Odd crack to extensions - Working fine when last used.

Rota flow - C/w PTO - Twin disc - C/w hopper cover - Adjustable rate & width - Hydraulic open/close - No holes or corrosion.

Starts and runs up as it should - Tub needs patching/repairing - Adjustable wheels - 9' cut approx - PTO shaft requires new guard before use

Rotors free and working - C/w PTO shaft - Offset - Previously patched/repaired - Cover very thin with some holes, useable as is but would benefit from repair/TLC

C/w PTO - Headland control - C/w Roll-over sheet.

Spares or repairs as top centre mount for brush has snapped - C/w Chilton headstock/brackets - Mounted on headstock but brush could be removed - This lot is part of an ongoing reduction sale due to a change in business policy. All items can be viewed by appointment with the vendors who also welcome enquiries

Tyres holding air - C/w PTO shaft - C/w rear hay gates - C/w stand - This lot is part of an ongoing reduction sale due to a change in business policy. All items can be viewed by appointment with the vendors who also welcome enquiries

5' x 10' sections - 2 slightly shorter pieces - 20 metre auger - C/w couplings and brackets - Unused - This lot is part of an ongoing reduction sale due to a change in business policy. All items can be viewed by appointment with the vendors who also welcome enquiries

Approx 1990 - SC3000 - SN: G38010 - Loading available - A little rust here and there - In working order - C/w 4 spare legs

SN: 20462 - 1.8M working width - Loading available - A little rust here and there but otherwise sound - Requires a few new flair tips - Can be used on front or back of tractor - Fitted with A-frame for easy hitching/unhitching

Type 2RB - SN: 20461 - 1.8M working width - Loading available - Haulm puller used for pulling potato haulm (stalks) to kill plant without use of sprays so that potatoes set their skins prior to harvest - C/w 4 spare puller bars

Engineer built 2 row PTO driven potato ridger - Loading available - 1.8M adjustable - Custom built for ridging potatoes - Rows widths can be adjusted

Spares or repairs - 1.98M working width - Concrete filled - Loading available - A project for someone - Drawbar, frame and bearings need rebuilding

C/w PTO shaft - working - For small/compact tractor - No loading available.

Good tyres holding air - Lights present but untested - SN: 312000003 - C/w PTO shaft (PTO driven) - Used recently - No substantial rust or corrosion

Needs roll pin on end joint as pictured (vendor can explain) - tyres holding air - c/w PTO shaft - Lely Lotus 630.

3 phase - working when last used 6-7 years ago - belt present but not pictured - 4'' diameter.

2 new hydraulic pipes recently fitted by previous owner - 6-600L capacity - c/w mounting frame - 3 point linkage - bought for job but never carried out.

Super hayliner 68 - Baled 2 years ago but parked since outside under sheet - Tyres both soft unknown if they will hold air

For spares or repairs

Solid framework - Some tines missing, vendor has 3-4 replacement tines for purchaser (not fitted)

Appears complete

Spares or repairs

Appears to be complete

Solid framework, drawbar needs repair

All tines present - Solid framework

Spares or repairs - Only 3 furrows

Tyres holding air - Tines appear present, springs - Straight headstock

Discs free - C/w PTO shaft (needs new guard before use)

Wooden seed box - Large iron wheels

3 of one type - 4 of one type (middle drags against wall) - 1 small drag - 2 not pictured - No lead bars

Solid framework and drawbar - Nice little roller

C/w fittings - Little use

Some tines/springs need replacing - C/w PTO shaft - 1 tyre good, 1 needs attention - C/w hay gates (1 damaged) - Free and working

Idea for small holder

Well maintained - Used on small holding for the last 12 years - Good working order

In reasonable condition - Manual folding - Still useable but one stay is broken and requires welding

Requires new tines - Crumbler roller is missing - No obvious oil leaks - Fitted with HR300 gearbox for 1000 PTO use -

Marshall 105 Tandem Axle Dung Spreader - Spares or repair - Brakes and lights NOT working - Barrel rusted out - 16.0-20 tyres

Metal frame at the back is broken - Needs replacing or repairing - 50mm rubber, wear on onside, little wear on the push side

Believed to be Ransomes - Wearing parts good - Can be loaded

Good working order - Tidy condition - Kubota compact tractor for sale at lot 57

Loading available

C/w Bamford Roller Mill with hooper - Single phase - Working order - Surplus to requirements - Loading available

C/w PTO shaft - Loading available - Not been used for a while but all turns and no bent arms, few tines missing

Loading available - All tines look to be present and with depth wheels - Good show piece or could work

Disc coulters for every furrow - Manual Vari-width - Straight plough - No cracks or welds - Good wearing metal - Ideal show piece

3 section harrows c/w bar but needs new chains to attach each section

Spares or repairs - C/w PTO shaft, good barrel (no holes) - Lights untested - Needs a bit of TLC - Good show piece

Nice set of disc harrows - Good discs that hasnt done alot of work

3pnt linkage - Loading available - Hasn't been used for a while but its all free - C/w cage for posts

C/w PTO shaft - Loading available - Hasnt been used for a couple of years but put away working - Would benefit with new blades

Loading available - Good frame and good chains with no breaks

12/24M working width - C/w PTO - Loading available - Good hooper - Hydraulic shut off - C/w 12M and 24M disc

Straight not bent - No rust 

3M - New 12V drive motor - Works well - Always dry stored

In working order - Fits into rear of tipper lorry or trailer

Not used for 5 years but all working - (trailer not included)

All good working order - Not used for 5 years

Some tine holders missing - Not used for 5 years

Not used for 5 years

2400kg - Disc - Hydraulic shut off - Good condition - 24m spread - 12m discs included

Twose 8ft Land Roller - C/w A frame for easy attachment for road transport - Red A Frame in photo not included - Loading available

650L capacity - Working, used last autumn - 12m booms with hydraulic adjustment

C/w Control box - C/w rear trailer hitch - C/w PTO - Working when last used 10 years ago - Barn stored - All tyres have good tread, holding air but perished - 1.4m pick up - All freely spinning

Used last summer - C/w hay gates and PTO shaft

Unsure of year - Good machine, straight and tidy - Only for sale as upgraded to a new flail topper - Little use past two years - A bit of welding here and there to strengthen joints where required

Spares or repairs - Spool control type - All over rust - Working when parked, a bit tatty here and there - Rear foot needs attention - Selling due to upgrade

Age related marks - Cat 1 and 2 linkage

Year unknown - Lights untested - Weigh display not working - Tyre condition reasonable - Not been used for a number of years - Dry stored - Working when last used

10' Long x 6' Wide - Working Order - High Tipping (See Photos) - C/w Dispensing Shute on rear door - Some surface rust in places but nothing much - Flotation Tyres - Lights Present - Specialist Trailer - Inspection / Viewing Welcome

4' 10'' wide approx - Tyres holding air, varying tread - Wooden floor - Lights present but untested - Very low - Jockey wheel present - This lot is part of a genuine full dispersal sale due to ill health. - VIEWING: Lots will only be available to view on one scheduled viewing day being Wednesday 26th March between 9am - 5pm - COLLECTION: Will only be possible on two scheduled collection days being Friday 4th April between 9am- 5pm and Wednesday 9th April between 9am - 4 pm. - Due to the circumstances surrounding the sale, viewing and collection will not be possible on any alternative dates. The auctioneers have had limited access to lots and buyers should satisfy themselves that descriptions are correct. All items should be treated as untested unless otherwise stated. NO MECHANICAL LOADING ASSISTANCE WILL BE PROVIDED TO PURCHASERS.

Timber floor & sides - Drop pin coupling - This lot is part of a genuine full dispersal sale due to ill health. - VIEWING: Lots will only be available to view on one scheduled viewing day being Wednesday 26th March between 9am - 5pm - COLLECTION: Will only be possible on two scheduled collection days being Friday 4th April between 9am- 5pm and Wednesday 9th April between 9am - 4 pm. - Due to the circumstances surrounding the sale, viewing and collection will not be possible on any alternative dates. The auctioneers have had limited access to lots and buyers should satisfy themselves that descriptions are correct. All items should be treated as untested unless otherwise stated. NO MECHANICAL LOADING ASSISTANCE WILL BE PROVIDED TO PURCHASERS.

C/w contents - All contents must be taken with trailer by purchaser - Some rust on drawbar - Mesh floor - C/w canvas cover - Tyres holding air - This lot is part of a genuine full dispersal sale due to ill health. - VIEWING: Lots will only be available to view on one scheduled viewing day being Wednesday 26th March between 9am - 5pm - COLLECTION: Will only be possible on two scheduled collection days being Friday 4th April between 9am- 5pm and Wednesday 9th April between 9am - 4 pm. - Due to the circumstances surrounding the sale, viewing and collection will not be possible on any alternative dates. The auctioneers have had limited access to lots and buyers should satisfy themselves that descriptions are correct. All items should be treated as untested unless otherwise stated. NO MECHANICAL LOADING ASSISTANCE WILL BE PROVIDED TO PURCHASERS.

10' 8'' long x 6' 6'' wide - Tyres holding air - Hydraulic pipes perished - Single tipping ram - Drop-down sides & tailgate - Some rust - This lot is part of a genuine full dispersal sale due to ill health. - VIEWING: Lots will only be available to view on one scheduled viewing day being Wednesday 26th March between 9am - 5pm - COLLECTION: Will only be possible on two scheduled collection days being Friday 4th April between 9am- 5pm and Wednesday 9th April between 9am - 4 pm. - Due to the circumstances surrounding the sale, viewing and collection will not be possible on any alternative dates. The auctioneers have had limited access to lots and buyers should satisfy themselves that descriptions are correct. All items should be treated as untested unless otherwise stated. NO MECHANICAL LOADING ASSISTANCE WILL BE PROVIDED TO PURCHASERS.

Ifor Williams CT1166G Tipping Flat Bed Trailer - C/w electric winch & remote - 16' long x 6' 6'' wide - C/w removable drop-down sides - Manual pump to tip trailer - All four tyres have good tread and are holding air - C/w 2 x spare wheel & tyre (good tread) - Lights present but untested (believed working) however light cable has some perishing - No loading ramps - C/w ladder rack - Red toolbox not included - Wooden floor - No battery for winch - This lot is part of a genuine full dispersal sale due to ill health. - VIEWING: Lots will only be available to view on one scheduled viewing day being Wednesday 26th March between 9am - 5pm - COLLECTION: Will only be possible on two scheduled collection days being Friday 4th April between 9am- 5pm and Wednesday 9th April between 9am - 4 pm. - Due to the circumstances surrounding the sale, viewing and collection will not be possible on any alternative dates. The auctioneers have had limited access to lots and buyers should satisfy themselves that descriptions are correct. All items should be treated as untested unless otherwise stated. NO MECHANICAL LOADING ASSISTANCE WILL BE PROVIDED TO PURCHASERS.

1000L Portable water trough - Solid Roadworthy trailer - all lights work with number plate holder

4 ton carrying capacity - Lights and brakes not present or working - Steel floor in good condition - Tyres in poor condition - 1 soft tyre

Owned from new - 12.5/80 - 15.3 tyres - 2 years old - Side rails - Lights and brakes work

2003 HOMEBUILT HYDRAULIC TILT BED BALE/LOWLOADER TRAILER - 25' - 10 tonnes carrying capacity - 23' bed length with 2' hydraulic ramp/extension - C/w built in hydraulic winch - Lights working - Hydraulic brakes working - Strap tie downs & strap box - Chequer plate floor in good condition - New tyres - Headboard needs attention - Rocking beam 8 stud axles

C/w dropdown mesh half sides - 1.6m x 1.0m - Chequer plate floor - Model: 5 X 3 MDS - Good tyres - C/w Tailgate & small internal gate - C/w Lamb dividing gate - ''This lot is part of an ongoing dispersal, the auctioneers having been instructed to sell the property.''

Hydraulic lowering for loading/unloading - C/w canvas cover - C/w galvanised loading gates (one slightly bent) - Lights present to rear but untested - Tyres with tread and holding air - Some paint flaking throughout - C/w cattle partition gate - Side access door - Rear flashing beacon - This lot is part of a genuine dispersal sale. Viewing is available by appointment but the vendor has limited availability. So collection will be by appointment only

C/w full cage sides - Had very little use from new - 1 owner from new, purchased in late 2022/early 2023 - 4 tyres with very good tread - Rhino board floor - C/w spare wheel & tyre (good tread) - C/w new type light lead - Rear loading ramp - All lights appear present & correct - Cage covers on lights - C/w jockey wheel - This lot is part of a genuine dispersal sale. Viewing is available by appointment but the vendor has limited availability. So collection will be by appointment only

Good tyres (12.5/80-15.3) - Some rust damage, has been made good inside by Andrew Symons LTD so is grain tight - Serviced annually by Andrew Symons LTD to crop assured standard - Brakes working - Lights working - C/w silage sides (not put on trailer for many years) - Twin axle - C/w grain sheet - This lot is part of a genuine dispersal, the vendor having ceased keeping cattle and reducing farming operations. There will be a viewing day on Friday 28th March 2025 between 10am-4pm and a collection day on Friday 4th April between 9am-5pm. The sale address is Affeton Barton, East Worlington, Crediton, EX17 4TU

2013 - 22' long - C/w front and back bale lades - 12.5/80-15.3 tyres - Good floor - Brakes working - Lights working - Annually serviced by Andrew Symons Ltd - This lot is part of a genuine dispersal, the vendor having ceased keeping cattle and reducing farming operations. There will be a viewing day on Friday 28th March 2025 between 10am-4pm and a collection day on Friday 4th April between 9am-5pm. The sale address is Affeton Barton, East Worlington, Crediton, EX17 4TU

Twin axle - Good tyres (12.5/80-15.3) - Serviced annually by Andrew Symons Ltd so is grain tight - C/w grain sheets - This lot is part of a genuine dispersal, the vendor having ceased keeping cattle and reducing farming operations. There will be a viewing day on Friday 28th March 2025 between 10am-4pm and a collection day on Friday 4th April between 9am-5pm. The sale address is Affeton Barton, East Worlington, Crediton, EX17 4TU

1.6m long x 1m wide - 2 flotation tyres, 1 wider and nearly new, 1 narrower with less tread - Solid timber floor - No lights/brakes - Opening rear door - No partitions - Ideal lambing/utility trailer - This lot is part of a genuine dispersal, the vendor having ceased keeping cattle and reducing farming operations. There will be a viewing day on Friday 28th March 2025 between 10am-4pm and a collection day on Friday 4th April between 9am-5pm. The sale address is Affeton Barton, East Worlington, Crediton, EX17 4TU

Turntable base - C/w horse haynes and attachments - Rear wheels 58'' diameter - Front wheels 40'' diameter - C/w lade - Barn stored - Timber solid with no rot - Made by Dobbs Bros of Mattishall