Suitable for feeding round bales - Fitted with Trima loader brackets and hoses (could easily be changed or put back to 3PL) - Self locking design - Will feed both sides - Fitted with side rollers to keep the bale on the table and also livestock guards - In good working order and can be viewed on a tractor if desired

6m Tine Harrow with Fan Jet Pro 65 Spreader - Sold as seen - Loading available

Brand new - We bought it for a 6830 it will fit other models - 2024 manufactured still with manufactures warranty - Still on the pallet it arrived on - Can be loaded our end

Tines 60% quick fit 2 tines - Rams rusty but don't affect it - All PTO guards all fine - Harrow tines to be removed before sale - Rams rusty but don't leak, have been like it for a long time - Working width 4m - C/w PTO shaft Only selling as increased work area - Loading available onto trailer or similar

Pin & cone weld on brackets - Bought new on farm - Only used in one season in 2022 to do 8 artic loads of sawdust - Tidy condition

Unsure of year - C/w PTO shaft - LED Lights and air brakes working - Used in the spring with out any problems - Selling due to no longer having livestock - Flails are ok, a couple down the bottom have gone back a bit but all useable - Tyres holding air - Stainless steel floor - Bed chain slats are straight and bearings all appear tight - Slight weep from rear gearbox seal - Viewing Welcome - Artic access, concrete loading area

80 X 90 4 strings - Bale count unknown - Used this year - Control box showing fault with one con-rod sensor - Baler works ok with one sensor working with manual

Good condition - 8'' self filling arm and docking pod - 850/50-30.5 flotation tyres - 4 point rear hydraulic linkage

Good condition - Cuts well - C/w spare blades - The mower is always stored indoors

Stored indoors - Well maintained - One owner since new - New tyres 2024 - C/w spare tines - 15 acres per year

Kuhn Axis 40.2 H-EMC Speed Servo - Hydraulic powered - Twin disc (S6 VXR DISCS) - Isobus connection - In built weigher - 12M - 42M Working width - C/w mounting trolley - C/w roll-over canopy

Spares or repairs (bed chain broken) - Feeder/ straw chopper - C/w PTO - Trailed - Tyres have good tread and holding air - C/w control box - Floor and side solid

Can be offset (hydraulic) - C/w rear roller - C/w PTO Shaft - Runs up as it should, used in 2024 - 2.8M cut - Sale due to retirement

Electric controls - Swivel shute - T-Bar linkage - Still in use for a week or so until last cows go - Tyres holding air - C/w PTO shaft - Pipes present - Runs up and blows straw as it should - Sale due to retirement

Starts, runs & chips - Damaged jockey wheel - Tyres with tread holding air (some perishing) - Swivel shute

Tyres holding air - C/w PTO shaft - Same owner for 10+ years - SN: CC0342A240316 - 1.4M pick-up approx - Rear ball hitch to attached sledge - No lights - Last used in 2024 summer without issue

Tyres holding air - C/w PTO shaft (new guard needed before use) - 1.55M pick-up approx - No lights - Same owner for 2-3 years and was serviced when purchased (2-3 years ago) - Worked baling straw in 2024 without issue

Trailed - Spares or repairs - Metal conditioning tines - Lights need attention - C/w swath/grass grouper - C/w PTO shaft - Used in 2024 - New PTO guard required due to odd niggles with grouper, PTO guard and some other odd bits

Travel linkage bracing bar has rusted significantly - Odd tine missing - 3pnt linkage working from solid -

3 point linkage - C/w control box - Approx 14000 bales - No welds/repairs - 750mm wrap

C/w rear roller - Hydraulic side shift - C/w PTO - Some surface rust/flaking paint (no holes) - All front guards present - Skids in good condition - Flails mostly in good condition

1.2M cutting width - Loncin 420CC engine - Pull start - Can be partially offset - C/w rear roller

C/w PTO - Adjustable skid height - Little use - Blades in good condition

Bale count: 32,048 - Same owner for 5+ year and believed to be second owner from new - Some perishing on small tyres - C/w E link control box - Approx 2M pick-up - Lights to rear, untested - Crop roller - some pick-up tines missing enquires welcome, sale due to upgrade

3 point linkage mounted - Hydraulic driven - Used last year - Belt in good condition - Manual wrap.

Year unknown - Small square bales - C/w PTO shaft - Used this season - Good condition - Always barn stored -

Year unknown - Small square bales - C/w PTO shaft - Been used as a back up baler - Been stored in the barn for a few years - All seems mechanically sound

18-24M spread - Good condition - Genuine reason for sale - Still in use - Calibration kit complete

C/w PTO - Used to bale 2000 bales in 2024, no problem - Hydraulic tensioner - Rear gate to attach flat 8 sledge

Not used recently but was working when last operated - C/w cover - Dry stored - Lights present and untested - Only minor surface rust visible - Hydraulic shut off - Headland adjustment

Electric blower - Manual calibration - Manual with machine - C/w control box - Working width 6m - Loading is available

Last used in 2023

Approx 1995 - 2.5M working width - Loading available - A little rust here and there but still sound - Had little use

5m working width - C/w control box - Loading available - Good condition - C/w levelling bars

Serial Number: sp_2012_011 - C/w PTO Shaft - Brakes working - Plug for lights missing

Serial Number: 22060714H - 2m working width - C/w PTO - Loading available - Brand new last year where it was only used once for a promotional video so is in 'as new' condition - Hydraulic offset - Hammer flail blades

Mounted linkage - Lights untested - Swivel shute - Electric controls

Working width 3.8m - Working rake - Selling as require a twin rotor due to increased workload - C/w PTO shaft

Serial Number: 62102276 - C/w PTO - 3m cutting width - Loading available - In good working order - Owned since 2010 - Downsize in tractor, no longer required

Disc coulters - Manual Vari-width - C/w 2 spare shears & 2 spare skimmers & finishing disc - Has been dry stored & unused for the past 7 years due to ill health & then passing away - Limited loading space available at location, Can arrange to transport to nearby layby if necessary to load on trailer with ramps

KVERNELAND LD 85-160 4 FURROW REVERSIBLE PLOUGH - Manual Vari-width - Recent ram seals done - Good plough only selling as want a bigger one - Hasn't done a big amount of work

Hydraulic folding - Good tines - Good working order

Good working order - Used on a 25HP compact tractor this spring

Bought new in 2023 - 2.5m wide - Had hardly any use - C/w Draper 60 litre sprayer tank & lance - Good working order - ''This lot is being sold as the vendor has changed farming policy, & ceased keeping cattle. There will be a collection day on Friday 4th April between 9AM & 5PM.''

Bought new in 2020 - C/w PTO (not pictured) - Only used on a 40 acre holding so done little work - ''This lot is being sold as the vendor has changed farming policy, & ceased keeping cattle. There will be a collection day on Friday 4th April between 9AM & 5PM.''

Bought new on farm - 3 point linkage - Only used on a 40 acre holding so done little work - Good condition - 2.5m working width - ''This lot is being sold as the vendor has changed farming policy, & ceased keeping cattle. There will be a collection day on Friday 4th April between 9AM & 5PM.''

Bought new in 2022 - 4 metre working width - Done very little work - Galvanised frame - Good condition - ''This lot is being sold as the vendor has changed farming policy, & ceased keeping cattle. There will be a collection day on Friday 4th April between 9AM & 5PM.''

1 metre wide - C/w ball hitch - Water filled (currently empty) - ''This lot is being sold as the vendor has changed farming policy, & ceased keeping cattle. There will be a collection day on Friday 4th April between 9AM & 5PM.'

3 point linkage - Works well - Has been used to lay water pipe - ''This lot is being sold as the vendor has changed farming policy, & ceased keeping cattle. There will be a collection day on Friday 4th April between 9AM & 5PM.'

2.8M working width - Bought new on farm - Used last year, good working order - PTO present (1000RPM)

SN: H25927 - Reasonable wearing metal - Hydraulic folding - Approx 4.4M working width - 2 wheels has recent new bearings

C/w PTO - C/w G new rolls + 4 part rolls of tama twine - Manual tensioner winders not seized - Tyres have good tread holding air but perished - Most pick up tines straight - Manual fold out - Baler has had new needles fitted

2013 - Working order - Twin disc - C/w hopper extension - C/w cover

Line plus - Forward speed rate controllable - Done very little work - C/w cover

Working order - C/w cover

2001 KUHN MULTI MASTER 151 6 FURROW REVERSIBLE PLOUGH - Good condition - Good metalwork

Unidrill - Good condition - Mounted drill

1996 - 4.6M width - Trailed - All discs present

1 owner from new - Hydraulic offset - Front & rear mounted - Working - C/w PTO shaft - Would clean up nicely - Big, strong topper.

Used for numerous acres in the autumn - C/w PTO shaft - Working - Good metal.

Same owner driver for the last 10-12 years - New main working belts fitted 1000 bales ago (18months ago) - Genuine sale due to retirement - BKT flotation tyres with tread & holding air (1 has slight scuff on side as pictured but has tube in it) - Service at the same time as new belts carried out by Halse of Honiton, approximately 18 months ago. - C/w control box - Net Baler - 2M wide pick-up - C/w crop roller - C/w PTO shaft - Bale count unknown as control box was wiped during previous repair, baler was approximately 4 years old when purchased and current owner has done 700-1000 bales a year with it in his ownership - 8 knives - Drop chamber - Self lubricating chains - Lights to rear, one lense damaged - Viewings & enquiries welcome.

C/w PTO shaft - Dual chop - C/w electric controls - Swivel shute - Tyres holding air with tread - Working order - Hydraulic tailgate

3 phase - New head & motor in last 2-3 years - Serviced annually - Working - Part No: 74626 - Code: BSEN286 PTI

Fully galvanised frame - Good blades - Weight trays - Not done much work

Good order - New Sila count 3 years ago - 750 wrap

New tyres 3 years ago - Used on small holding for past 10 years - Working order

Good working order - Tyres perished but hold air - Good auger and beaters - Only selling due to no longer needed

In good condition - New set of blades to go with - Over run clutch on PTO

Fully offset topper - Done less than 100 acres work - Good condition

Rota cut - 45000 bale count - 2.2m pick up width - C/w Control box - C/w PTO shaft, Guard needs repair - Knives want sharpening - Baler been on the farm for 15 years, bought with 30000 on clock done roughly 800 a year silage, hay & straw replacing due to gone over to McHale can be seen running on tractor

20 metre sprayer converted to 21 metre, could be changed back - Used last season - C/w PTO, manual & control box

Heavy duty framework - Wooden bearing blocks replaced recently - Can be loaded

Tyres holding air - Hydraulic folding - Used last season - Solid framework -

Linkage mounted - Swivel shute - C/w electric controls - Hydraulic rear door - Viewing welcome

Now removed & in bits ready for collection - C/w various motorised rollers - Stenner up & over cross-cut - C/w 2 year old main motor which cost in excess of £4000 - C/w log carriage & motors - Both head rigs have been recently skimmed to create flat surface for saw blade which also comes with some spare blades - C/w second cutting carriage that was purchased to replace current carriage but was never done and ended up buying new mains saw auto for over £4000

1,220 hours on clock (unknown if correct) - Runs, starts and drives as should - New brush recently - Recent light service - Hooper solid - Tyres have some tread and holding air

C/w John Deere screen - C/w universal steering wheel - Working order

Working - Age unknown - Lights mostly present but untested - Tyres holding air - Dry stored by current owner between use - Owned for 3-4 years but being sold due to upgrade

PTO driven - 100M max reach - Steel cable - 3pnt linkage mounted - Metalwork solid - Working order

Working order - Dry stored - C/w Control box - Can be loaded - Tyres holding air - Web appears ok - Can be viewed on-site - Serial Number: 44201215

2010 KRONE 9140 BUTTERFLY MOWER CONDITIONER - Steel conditioner tines - Quick release blades

RAU CULTIVATOR C/E 3M ACCORD AIR DRILL COMBINATION TRAMLINING KIT - Working order - Surplus to requirements

Front mounted shatterboards - Multiseeder - Very good condition

Rear axle steering - All tines present - Lights working - Paintwork tidy - Working order as used last year

Spares or repairs - Kverneland/Tarrup T8 double satellite round bale wrapper - Electric control box - Not done a great deal of work - Good tyres - No cracks or weld - Nice straight machine - Needs the wiring to the control box looked at as can't get power to it - Simple fix and was used last year - Comes with owner manual

Farmer owned and always kept inside - Good working order - Not done many bales - Electric control box included

Not used for 5 years

4M working width - Tyre packer - 3 rows of tines no linkage pins

8' chip - Variable chip size - Regularly maintained - Bearings done at 2,600 hours - New battery and tank - Been a really reliable machine while we have been using it - Have been running for 6-8 hours a day and hasnt missed a beat - Video: https://www.youtube.com/shorts/vrO7pOayuzQ

2.5m with ballasted roller - Serial No: M1425353 - Loading available

Amazone Powerharrow AD-P 303 Combination Drill - Serial No: AD0000739 - 3 metres working width - PTO - Contol box - Bed damage - Leaking from the rotors and not driving on one side of the bed - Suspected bearing/gear failure - Loading available

Working - Used last season - Dry stored - C/w PTO shaft - Adjustable swathe board

Trailed X-pattern - Good working order - Rear hitch - Folds horizontally for transport

C/w control box (not pictured) - Square bales

Solid framework - Linkage pins slightly bent - No loading available - This lot is part of a genuine full dispersal sale due to ill health. - VIEWING: Lots will only be available to view on one scheduled viewing day being Wednesday 26th March between 9am - 5pm - COLLECTION: Will only be possible on two scheduled collection days being Friday 4th April between 9am- 5pm and Wednesday 9th April between 9am - 4 pm. - Due to the circumstances surrounding the sale, viewing and collection will not be possible on any alternative dates. The auctioneers have had limited access to lots and buyers should satisfy themselves that descriptions are correct. All items should be treated as untested unless otherwise stated. NO MECHANICAL LOADING ASSISTANCE WILL BE PROVIDED TO PURCHASERS.

Serial No: 00NC90 - 1.4m head approx - C/w mounting frame - Previous weld as pictured - C/w PTO shaft - Some perished/perishing pipes - Used this season, prior to christmas - Cable controls - This lot is part of a genuine dispersal sale due to the auctioneers selling the farm. Viewing is available by appointment with the vendors only - All lots MUST be removed from the property by Sunday 9th April at the latest with no exceptions to this permitted under any circumstances - Please note the property is up a long lane and 4WD vehicles would be recommend for collection of items

Approx 16' working width - Web reasonably good - Strong framework - Manual folding

C/w PTO shaft - No NSTS test (expired in 2023) - Was working when last used in 2022/2023 - 800L capacity tank - Chemical induction - Was drained prior to being parked - No air - C/w pressure gauge & control box - Owned for approx 7-8 years - Sold as has been upgraded

Would make a nice feature - Appears to be complete

3pnt linkage - Tidy - Good hydraulic pipes - Supplied by K.Machen