8' working width - Loading available with pre arranged time with Vendor - All feet and tines in good condition

Loading available - Missing a few nozzles

Very little wear

Refurbished - Reline and painted

Serial number: 002009 - C/w PTO shaft - Loading available - Good condition - In working order - Vendor selling due to upgrade

Never used by vendor - Will need a service before use

Used last year - Will need a service before use

Not been used for a few years - Has stainless steel screw in bungs - Solid drawbar -

Good solid roller has all the head bars ready if you wanted to attach extra rollers - On a ring hitch for easy hitching up - Good roller - Ready to go to work

Last used in 2022 and was working fine has been dry stored since - Comes with a qty of spares - Good solid hopper - 1 tyre new couple years ago other one still holds air fine but is older - Has setting sticker on the under side of the lid - Would benefit from a service - Also a bag of spares for the drill not pictured comes with it

Good solid and ready to work - Has currently only got 8 legs on ATM but the 9th does come with it

Barn stored - 1 tyre soft - 2 slats broken

With Manitou brackets - Working order - With slight rip in belt

JCB brackets - Last used recently - Working order - Auger showing rust damage - This lot is part of a genuine dispersal, the vendor having relinquished the tenancy

Used recently - Good working order - Barn stored - C/w PTO Shaft

Topper is useable but has a oil leak on right hand gear box - Last used 2 years ago

Spares or repairs - With PTO shaft - Good tyres - Working when last used 10 years ago - Needs attention

Last used summer 2022 - Working order - Mechanically good order

Spares or repairs - Current vendor bought it approx 12 years ago in working order but has never used it. Has been barn stored ever since - Must have sisal string - Will need attention to get working

Tyres have good tread and holding air - Metal solid - Ring hitch

1.2m head - F10 Flails - Electric controls - Used approximately 1 year ago - Not pretty but may do a job - 3pnt linkage mounted

Spares or Repairs - Missing drive function - 8' Wide

Electric shut off - Used last year - Only for sale due to upgrade

C/w PTO - One seal weeps a little

Rollers are full - Barn stored - Loading availble

New set of chains - Loading available

7' working width

Working order - C/w two thirds of a donor machine for parts - Rear rolled is a caged roller and the front roller is flexi coil-C/w spare cultivator as spares

C/w PTO - Believed in working order - Loading could be available on separate negotiation

C/w end metal

Converted to tractor drawn - Frame needs attention - Ring hitch

Triangle layout - Some damage to wheels

Horse drawn - 1 wooden tine missing

Please note tree may be growing round the plough

1 slightly buckled shaft

Working when last used - C/w seat - Canvas needs repair

St Germans, Cornwall

C/w PTO - Believed in working order - Loading could be available on separate negotiation

C/w PTO (no guard) - Wag tail

Believed could be ME - Between 5'-7' - Mixed conditions

C/w metal ends

C/w PTO shaft - C/w roll over cover - Not used recently - Very little corrosion visible - No lights - Working order

Tested and was working when purchased approx 5 years ago but not used since

Spares or Repairs - Working order when put away 12 months ago - Except split in tank around the clamping steel - 12m wide - 525lts

Good condition for age - A bit of rust on frame but mats are most likely new and done little work

9' frame - Full of concrete - Can be loaded for purchaser - Solid frame

3 pnt linkage mounted - All tines present some slightly bent - Please note all photos and the description were taken in October 2023

4.5m working width - Unknown year - Will need new wheel bearings or take wheels and legs off - Also one tine is 1/2 broken on one leg, they where made with two sides - Unused after purchase at a farm sale - so may need freeing with some oil and machine to unfold

Good even web - Drop link to drag with ball hitch - C/w Rear weights

ATV/UTV - 1.2m cut - Adjustable height - On/off switch (In cab) - Vanguard 16HP V-Twin Engine - Dry stored until recent weeks - Can be offset (3 settings) - starts, runs & cuts - Very genuine reason for sale

ATV/UTV - 1.2m cut - Adjustable height - 4 Wheels to support it - Electric start - Can be offset (3 settings) - Vanguard 18HP V-Twin Engine - Dry stored until recent weeks - Starts, runs & cuts - Very genuine reason for sale

Working when last used 2 years ago - Barn stored - 3M working width - Transport wheels and working wheels all holding air - Has been modified to fit a dumpy bag - Rubbers stored seperate to stop perishing - Tranline kit working

Serial no: 3965 - In good working condition - C/w instruction manual

In working condition - Tyres hold air - C/w hay gates - C/w PTO - C/w stand - C/w operators manual

Metal work sound - Not used for 20 years - Barn stored

Spares or Repairs - Flat transport tyres (been stood) - 4M crumbler roller - Does not work but reason unknown purchased as refurb project which never developed

c/w JCB handler brackets welded on - Complete, but transmission needs unseizing

MASSEY HARRIS 10' VINTAGE DRILL WITH STEEL WHEELS - Spares or Repairs - Not running - Believed to be a Model 079

For compact tractor - X-Demo, little used - Working width 1.8m - Engine power 20-35hp - Cutting height 3cm or 6cm - Blades x3 - Length 1892mm x width 1450mm x height 600mm - Three point connection - Cat 1 - Serial number: 202100524001 - C/w PTO - Loading available - Little use

Working but corroded in places on canopy - Supplied by kilworth - No PTO shaft - Hydraulic Hi-Tip working

Used twice - Spread grass seen nicely - Connects to battery with on/off switch

Has been stored inside - Looks to be in good order but not been used by vendor - Blade is present - C/w PTO Shaft

I do not have any farm machinery to help with loading of this piece of equipment but I may be able to arrange assistance if required, please make sure to contact before hand.

2 row - Tyres 2RB - SN: 20461 - C/w PTO - Loading available - Unused for several years but always barn stored - C/w 4 spare puller bars

2000 Oldenhuis 2 Row - 2FK OEX Front/Rear mounted Potato topper - A-Frame fitted for ease of attachment - SN:20462 - 1.8M working width - C/w PTO - Loading available - A little rust here and there - Not used for a while but always barn stored

Spares or Repairs - C/w PTO - Cutting width 2.4 meters - Loading available

Stored in the dry - Selling due to ill health and retirement

Selling due to ill health and retirement

Unknown age but over 40 years old - It has been adapted and can be used on large bales as well as traditional small bales - It has always been stored indoors - Although it has not been used for a few years it is thought to be in good working order - I do not have any farm machinery to help with loading of this piece of equipment but I may be able to arrange assistance if required, please make sure to contact before hand.

C/w PTO - Cutting width 2.4m - Loading available - All works as it should - Has new spare blades to go with it

Chilton brackets or 3pnt linkage - C/w new spare rope - Some new hydraulic hose recently fitted

Runs up fine - Used this season - C/w few spare tines - Working - C/w crumbler roller

3 Point Linkage - Some rust damage - 3 Rotor belt drive - Not used for some time - No known faults

For potatoes - Last used in 2022 - Dry stored - C/w frame for mounting on a tractor without front linkage - Missing one leg

C/w control box - C/w seed pipes - C/w manual - C/w seed bar - C/w cover

Ready for work

Working order - Hardly any use from new

Runs up but not put to work

Ready to use

3 Meter - working order - PTO included

500mm wrap - Will need TLC before use - Not been used for a few years - Needs at least two handles - Hydraulic pipes seem to be ok

Age related condition - working order

Spares or Repairs - C/w PTO shaft - Old baler, was working, needs TLC - Stored for a few years now - Need space could be backed onto a trailer but cannot lift - Tyres good to travel but as we did only local miles, down to purchaser

Spare or Repairs - Last used 2 years ago - Rusty on panels

Spare or Repairs - Last used 2 years ago - Rusty

Spare or Repairs - Last used 2 years ago - Bent shute - Rusty

Spare or Repairs - Rusty holes in panels

Spares or repairs

3 Point linkage mounted - Timber solid

340m wide cut - 540 PTO - Playing field large lawn mower

Spares or Repairs - 600L capacity - Loading available - One boom pipe broken

No PTO shaft

Full working order - Only used a handful of times

VICON FERTILIZER DISTRIBUTOR ROTAFLOW RS-M

Very little use since new - All good metal with very little wear - Adjuster working as should - Original paint

3 point linkage - Rubber not to bad

In good condition - Very straight