Cutting Width - 2.42m - Swath Width - 2.2m - Transport width - 1.9m - Weight - 1015kg - Discs - 6 - Knives - 18 - 900/600 with Nylon tines - PTO 540/1000 - Min Hp - 65/90 - CAT2 linkage - Serial Number: KT448100 - C/w PTO but cover needs replacing - Loading available - Upper panel bent out of true - Run up ok but untested under load

Serial Number: 9518 - Capacity 2500 - Pump and front trap, - Top Hatch, - Sprung Drawbar, - Rear or Front LH Fill, - Hydraulic Braking, untested - Trailer Lights, - Rear Work Lights, untested - C/w PTO - No vacuum pipe included, although brackets are supplied

Model: 28-RBH220 - Mainly stored in warehouse - It has light surface corrosion only - Robust, sturdy, and flexible riding arena harrow suitable for most surfaces - 20 spring tines - 36 height-adjustable rake tines - Side scraper for collecting material pushed out from the track - The adjustable rake tines can be set to go deep, catching any unseen objects in corners and along the edges with the adjustable side scraper. - The harrow is equipped with one row of spring tines making it flexible, one row of rake tines, a mesh roller with spiral making it fully flexible, and a side scraper to pull in material pushed out of the groove. - Using a tool, you can easily adjust the height of the rake tines in the back, the mesh roller, and the side scraper. The mesh roller can be removed with the help of a tool. The flexible construction of the three-point linkage ensures better and more consistent results.

Drill set up for RDS (electric controls/display) (c/w Manuals for RDS) - 24m Tram lines - 3m working width - Accord 3000 Air Drill - Drilled corn this season - C/w RAU packer roller & spring tine cultivator set up - Solid metal work - Inspection welcome - Drill comes with packer roller

16'' width - No cracks or welds on beam - Mostly good wearing metal - hydraulics adjustable - Shear bolt trip leg

2014 KRONE BIG PACK 1270 LARGE SQUARE BALER - Single axle - Approx 33,000 bales - Bought new from compass tractor and annually maintained by Compass - high speed pick up - Good tread on flotation tyres (new in 2022) - First used in 2015 - Used for hay,silage and straw - Wide pick up (2.3M) - This lot is being sold due to ceasing arable production on the farm.

Fully refurbished 3 years ago including entire bed and conditioner plus many other parts - Owner has owned mower since new - Fully serviced and ready to go - Viewing welcome - Loading available

Drill and metering unit is an Accord - For drilling grass and small seed - Viewing welcome - Loading available

Twin rotor - Hydraulic width adjustment up to 8.8m - C/w Control box - Individual rotor height adjustment - Used all of last season but owner downsizing for smaller baler - Enquires/ viewing welcome

1 owner from new - C/w PTO shaft - Hydraulic folding - Hi-crop flow - Relatively tidy skirt & paint - Adjustable swath board - Nylon conditioning tines - Inspection/viewing welcome

1 owner from new - C/w PTO shaft - Hydraulic folding - Hi crop flow - Relatively tidy skirt and paint - Adjustable swath board - Nylon conditioning tines - Inspection/viewing welcome

300l hopper - 3M working width - C/w control box - Loading available - Brand new, never used or opened - Change of farming system - C/w pipes, on/off, 3 rollers for different types of speed

Some mixing discs and hubs missing - Good job on first pass stubbles - Spare points

12 Years old - Done 10-15k bales - 2 cylinder - Diesel engine - All starting on the key - Remote & manuals included

Hardly used, very good condition - To fit 5-20 ton machines - No brackets

Masterdrive - C/w PTO shaft - C/w Stand - All arms and tines present - 4 wheels and tyres - C/w skirt

1,200 L tank - C/w control box - C/w PTO - Section control - Adjustable boom height - C/w suction pipe - Last used Autumn 2022 - Working when last used - C/w tank wash system

1406 hours - Suitable for running computers - Full service history - C/w transport wheels - 230 or 115V - 5 outlets - 27L fuel tank - 92 db

Been parked in the dry for a number of years - Ran through a few bales and it ran fine - Tyres show signs of age but holding air - Loading not a problem

1993 Auto wrap 1500 square and round bale wrapper - Same as Tanco auto wrap - Been parked up for a number of years - Ran up fine, bale count unknown - 750mm - Auto cut off

Mk2 - C/w PTO shaft - Lights work - Brakes work - In good working order - New wide angle PTO shaft - Good chains, sprockets and bearings throughout the machine - No wear on tips/ points on the beaters

15HP - Unknown manufacturer - Made in china - Serial number: 33335 - 120cm working width - No PTO - Item is currently on a wooden pallet - Weight 230KG

5m working width - ''Turn Inwards'' outer rotors for narrow access lanes and gateways - Good condition - All tines present - New PTO Guard - Greased up and ready to go straight to work - Loading available

C/w Lights to rear - No rust or corrosion on discs - Tidy - C/w PTO shaft - 3pnt linkage - C/w Roll-over cover - Headland adjustment - Inspection lenses - This lot is part of a genuine off farm consignment due to a change in farming policy. The vendor welcome all enquiries or viewing requests.

Not working - The reason it's not working is some broken teeth on drive cog - Side rotor nearly new

C/w PTO - Slight damage to back panel (just a cover) - Tidy baler - Always barn stored - Wide pick up - Hydraulic bale tensioners - Odd pickup tine missing but working nicely

2009 POTTINGER EUROTOP 881A TWIN ROTOR RAKE - C/w PTO shaft - C/w all arms and five new arms - C/w swath Skirt (not pictured) - Two good tyres - Spool control - Used last season & should go straight to work - Rear lights present but untested - 4 Wheels per rotor - Owned for approx 4 years - This lot is part of a genuine off farm consignment due to a change in farming policy. The vendor welcome all enquiries or viewing requests.

Metal conditioner tine - 2.7m cut - Reasonable tidy for age - Used last season - Dry stored - Owned approx 5+ years - Adjustable swath boards - This lot is part of a genuine off farm consignment due to a change in farming policy. The vendor welcome all enquiries or viewing requests.

Tidy paint work - Good tines & tips - C/w with 4 leg stand - Extra ballast frame - 3pnt Linkage - Only covered approx 20 acres from new

Spinning disks - New rear door - Good working order - Ready for work - Chain in good condition

2004 AMAZONE ZA-M1200 FERTILISER SPREADER (37) - 1 owner from new - C/w Cover - 18m discs - Headland adjustable - Hydraulic shut off - Lights need attention - Dry stored - 2 x S500 hopper extensions - C/w PTO shaft - This lot is part of a genuine retirement sale whereby the vendor is happy to accommodate viewings by appointment.

1 owner from new - Dry stored - Only used two or three times since purchased new - All tines present - Tyres holding air currently but one was loosing air due to sidewall - 3 point linkage mounted - Contour flexing - This lot is part of a genuine retirement sale whereby the vendor is happy to accommodate viewings by appointment.

2017 MASSEY FERGUSON TD524 4 ROTOR TURNER - C/w PTO shaft - 1 owner from new - Tyres all holding air - All tines present - C/w stand & deflectors - Some minor paint flaking - Overall tidy, genuine machine - This lot is part of a genuine off farm consignment due to a change in farming policy. The vendor welcome all enquiries or viewing requests.

1 owner from new on small farm - Dry stored - Nylan conditioning tines - C/w manual - Skirt present all round - Adjustable swath boards - Hydraulic folding - Working order - Can be loaded onto trailer - Enquiries welcome

1 owner from new - All tines present with some spares - Headland adjustment - Tyres holding air - Front & rear hazard fenders

Fella TH540 hydro 4 rotor turner - New PTO shaft - All tines present with some spare tines - Headland adjustment - 1 owner from new - No rear hazard fenders

8.5m working width - C/w PTO shaft - Loading available - Some guards missing - Didgidrive - 3 point linkage - Hydraulic folding - In working order

Twin auger - Control box - Front cross conveyor - Rear steer - Hydraulic brakes - Good working order - Good tyres

2.4m width cut (8') - C/w 3 Topper skids (convert from mower to topper) - Good condition, very little wear on the whole machine - just been serviced, bed stripped down, new semi fluid bed grease, full set of new blades, 3 new mowing skids, 2 blade carriers, deck timed correctly, gear oils replaced, Skirt/curtain is A1 - Barn stored most of it's life - Everything works as it should & is ready to go straight to work. - Loading available

Serial number: KTNKL284k00000098 - 3.2M cutting width - C/w PTO shaft - Loading available - Used first cut in 2024 - All blades replaced with new - Ready to go to work

1.6M working width - C/w PTO - Loading available - 1 rear roller bearing needs changing - In working order, and rotor runs up smoothly - Flail head offsets side to side on one - ram and raises/lowers on second ram - Pto shaft included Weight is one tonne, this is a well made machine from a well known British marque, not your usual chinese junk - One rear roller bearing needs changing - Only selling as its too big for my 5000 so have bought a smaller machine - Tractor not included! - Loading available by appointment

C/w row crops 16.9x34 - Full working order will be sold with new test - Induction hopper,6 cylinder pump , triple body, 844 control box - Ram seals redone in winter along with pump service.

Tyres holding air - All tines present - C/w PTO shaft - C/w Stand - C/w Rear fenders (removed by previous owner, some damage) - C/w 6 new tines - One mounting support bent as pictured

8' cutting width - C/w PTO shaft - Good condition - Barn stored - Paint work not clean due to being covered in oil after use - Loading available

Serial Number: SG2500171024 - Capacity 2500 - C/w PTO Shaft - Lights working - Brakes working - In use and good condition - Ready to use straight away - Tyres in good condition

Skids and blades in good condition - 3 blades per rotor - C/w PTO - Skirt in good condition - Very little use - C/w manual

Rear discharge - Good working order - Beater gearbox rebuilt last season - Ready for work

C/w PTO Shaft - 2.8m Cut - C/w Stand - Good Skirt - Viewing welcome - Sale due to upgrade

C/w PTO shaft - 8'' Input - Purchased & used for its purpose & now surplus to requirements

Not used recently but was working when last operated - C/w cover - Dry stored - Lights present and untested - Only minor surface rust visible - Hydraulic shut off - Headland adjustment

In working condition - Barn stored - C/w operators manual

Bought new on farm - Only selling as bought a new twin rota rake - 12' sweep - Last used 2 years ago - Good working order - All tines present - Good tyres - Only done approx 70 acres a year - Believed bought in 2012

Used last season to do 8 acres - In working order - Reasonable stars - Road lights - Bolder box - Rear steering (auto straight doesn't work) - Left/ Right Levelling - Auto depth - PTO needs new guard - Slight leak on main lift ram - Selling as we have stopped growing potatoes

24'' Cambridge rollers - 6.2 metres working width - Reliable and robust - It has a circumference 2'' wider than competitors - Can be used after sowing to help with growth rate of the crop by increasing uniformity of seed emergence - Loading available

Engine driven (lancin 678CC engine) - 5' cut - Rocking axles - 23HP engine - - Key start (working) (key in office) - Can be offset - C/w rear roller - 4 tyres all holding air - C/w full manual -  Inspection welcome

Fold around - C/w PTO - Ram protected when folded - Main body and skirt solid - No bends on skids - Adjustable depth - Blades in good condition for age

Good solid spreader - Works as it should - Good rotor - Recent front and rear bearings - Good tyres - Ready for work

In as new condition - Complete with new set of blades - PTO - Loading available

High capacity baler, with wide pick up - Hydraulic bale density - regularly serviced and greased before use - Baled 4000 bales last year without a problem - Always barn stored - Lights working - Only selling due to an upgrade

5-1m max working width - Owned from new - Good working order - Recent full set of new tines - Very little work - Barn stored

C/w control box - 1 worn tyre, but does hold air - Wrapper has been barn stored

Used last season - In good working order

Flexi-legs & disc - Working width 3 metres - This leg & disc cultivator is a demo set, hence its used appearance - It can have both low disturbance and horsch jockey style legs attached to its flexi-legs structure - Built to highest quality spec with hardened steel and German-sealed for lift bearings - Loading available

Serial Number: HR3655 - Cutting width 2m - c/w PTO shaft - Hardly used - Loading available

6F - Transport wheel & tyre - Two disc coulters - C/w twin leg stand - Some new hydraulic pipes renewed recently

1.2M Head working width - 4.9M max reach - Lights not working - 3pnt linkage - Electric lollipop switches - Serial number: 19pa2797 - F10 T flails - Vendor has owned for 4 years, he has greased daily, oil and filters changed annually - Loading available - Slight gearbox leak, rear seal needs replacing - Slight bend in arm - New style 1.2M head - Vendor has cut 600+ acres with it each year since owned it - The arm was bent When purchased but it does not affect the use - Has recently had rotor drive collar replaced, good flails , head and roller bearings are good, runs smoothly - Both pumps in good order - Gearboxes leaks a little bit - No welding has been done on the arms - Had a new control box 2 seasons ago

C/w PTO - Loading available - Small leak from one of the gearboxes - Working order - Used last year - Had a fresh lick of paint in the winter

3.8m working width - Loading available - New PTO shaft - Good springs - Recent new tyres - Tines present, Some wear - Wheel height adjustment operational in 3 settings - Repair to headstock & one gate (see photos)

55,000 bale count - 80 x 90 bale size - C/w Control box - C/w PTO shaft - Rear steering axle - Not a blower control box but no loom

Working width 5 metres - An ex-demo - Finishing cultivator to be used to create a light tilth and finish your seedbed after initial ploughing - Sprung loaded levelling bar at front with a 320mm cage roller followed by 4 rows of 12 x 32mm straight tines and finished off with a steel ring packer that's 200kg per meter - Full hydraulics folding transport kit - Can come without transport kit, full kit is 1800kg - Loading available

Hydraulic shut off - Disc - Always oiled after use - Good condition

C/w swathe board - 4 wheels - all tines present - C/w stand - C/w PTO shaft - Owned for several years - C/w two fenders - Big rake for a single rotor

C/W PTO shaft - Twin disc - Hydraulic shut off - C/w Roll-over cover - Solid hopper - Variable rate

2004 MASCHIO RECO ALIANTE 300 PIGGY BACK DRILL - 3m width - 24 row - C/w markers - Most tines present - C/w control box - Lights need attention

Twin rotor rake side delivery so you can put 50' into one if needed. - Can out the sheet down in the middle & make two separate rows for a small baler - One bearing has gone where the pot goes in the rotor - PTO shaft input bearing gone

1.2M head working width - 4.9M max reach - Lights not working - Electric lollipop switches - F10 T flails - Serial Number: 04PA35 - Vendor has owned for 2 years, used as a backup machine - Not used since January 2023 - Loading available - Slight gearbox leak, head tilt ram seal needs replacing, rolle bearings gone, piggy back pump for arm controls not working - Bought as a backup machine, has done no more than 50 hours work since the vendor has had it - Does a great job, runs smoothly although the ground roller vibrates as the bearing are gone - Piggy back pump not working when I bought it so has been piped so that the rams are powered on a flow and return spool - Flails still have life in them. Original head with 2 way cutting. - Arm straight with no welding

Working width 5m - Loading available

Spares or Repairs - 2.8 Cutting width - Year Unknown - Needs a new PTO shaft and chain for conditioner - Used last year but needs some minor repairs - Loading available

3m working width - C/w PTO shaft - Loading available - Good working condition, not done much work - No crack or welds - Height adjustable legs - Have been un-seized and work as they should - Greased and ready to go to work

Used this summer - Tyres are serviceable - One spare tyre- Several holes in the front 

C/w Hydraulic Top link - Rope in very good condition - Little use - Hydraulics mast tilt - 3 point linkage mounted

Hydraulic folding - All tyres holding air - All tines present - Most tines still have paint on them - Very little use - Auto lock when folded

C/w PTO - Twin Disk - C/w Cover - Hydraulic shut off - C/w Agitators - Lights present but untested

2.7M cut - C/w rear roller - C/w PTO shaft - Year unknown -  A Strong topper

Has been refurbished by Daleagri with new bearings, pipes and belts - All running gear, new rims and tyres - Heavy duty gear box with low and high - 12 meter discs land drive - Good spreader

Working - Tyres holding air - Can be loaded for buyer - Dry stored - Hydraulic tilt - 16AMP plug - Good belt

26182 bale count - Conventional - C/w control box - PTO shaft - Owned by vendor for 5 years, selling as vendor has purchased a newer baler

8.6M cutting width - PTO shaft - Loading available - One bed is broken, does not drive extra bed included for spares

2011 Teagle SX3000 G3 Centerliner Fertiliser Spreader - Twin disc - Showing rust on bottom

Used last year - Needs new hat as existing one has broken off

C/w Spare wheel - Good tyres (one new) - Overflow protection vessel needs replacing (rusted out) - Pump works - Vendor bought to use but has never actually used. Not believed to have been used for 3 years - C/w Slurry pipes

Twin disc - On transport wheels - Electric controls - C/w control box - C/w PTO - 600kg capacity - C/w cover - Some rust inside hopper

In good working order - Good solid metal work - Full guarded PTO shaft

C/w PTO - C/w 2 gates - Tyres holding air - Most springs need replacing - No assistance with loading

Spares or repairs - Some tines/ springs need replacing - Tyres hold air - PTO shaft missing - Wheel height adjusters stick in centre position - Loading available

Unknown make - All rings present - Frame appears in good solid condition

Unknown make - 3 point linkage - Some discs missing

New tyres 2 years ago - Used 2 years ago - In good working order - Spare string - Selling due to retirement - Loading available

Spares or repairs - No metal detector unit - C/w PTO shaft - 5' pick up width - Sharpening stone worn out - Last used 10 years ago - Barn stored since - Working when packed away - Complete with 9 spare blades