Good condition - Used 4 times - Hasn't been used for a year but all working when last used

Serial Number: HR3655 - Cutting width 2m - c/w PTO shaft - Hardly used - Loading available

Paintwork good - C/w PTO - Single hydraulic ram for lid - Chains & flails have god wearing metal left - Tyres have good tread - Breaks & lights working - No holes - Chain tight - 7.5 cubic meter - 1 chain rattling

Had little use - Working order - C/w PTO shaft - Purchased in early 2023 but only used a handful of times since and there for cannot be justified

9' cut - Resprayed - Adjustable depth wheels - C/w PTO shaft

Air brakes - Tyres holding air - Hydraulic tailgate - Lights present to rear - Reasonable paint - Solid Floor - Sprung draw bar - Rocking bar axles

C/w PTO - Lights not working - Brakes untested - Good working order - Nearly new bearings and chains - For sale due to upgrade to rear discharge

Good tyres - Hydraulic brakes - c/w Spare tips and beaters - automatic light deflectors - C/w PTO shaft - Will go straight to work

Trailed straw chopper - Working order - Swivel spout - High and low box - C/w electric controls - Sale due to no longer needed

Mower conditioner - Has one new tyre - 540 PTO speed - 3m cut - Lights to rear

Straw chopper - Shiwel shute - c/w control box - T bone linkage - Hydraulic tailgate - C/w PTO shaft - Reasonable blades - Tyres have tread - some damage to lights

750mm

2.5m Transport width - Slurry is pumped through machine & worked into ground as it spread - Making better use of Nitrogen while aerating ground at the same time - 6m working width - Can be retrofitted to all slurry tankers 2000'G & upwards or can be mounted onto 3 point linkage & used with umbilical system - C/w Rear lights - Reason for sale due to change in machinery policy.

All tines present but complete - Adjustable grading bar - C/w front and rear crumbler - 4.7Mtrs wide - Barn stored

TMO 1700 ZANON TRINCIA ARGINI FLAIL TOPPER - PTO - SN: 1002412091613877 - Working width 1700mm - Very little use - Loading available

Kverneland Exacta-Cl fertiliser spreader - 1500kg capacity - C/w extension cover - Used last season

Offset topper - C/w PTO shaft - Solid hood - Working

Reco Mengele SH30N - Working order, did lightweight work last year - Extended shoot, electric control - Pick up hitch

C/w PTO shaft - Tyres holding air with good tread - Hydraulic lid - Lots of small holes in barrel and corrosion present throughout - Lights present to rear (untested) - This lot is part of a genuine dispersal sale due to relinquishing the tenancy. Viewing and inspection is welcomed by the family by appointment onl. All items have had little use in recent months and inspection is advised and encouraged.

Used last season to do 8 acres - In working order - Reasonable stars - Road lights - Bolder box - Rear steering (auto straight doesn't work) - Left/ Right Levelling - Auto depth - PTO needs new guard - Slight leak on main lift ram - Selling as we have stopped growing potatoes

3M - 48 blades ( blades are worn )

15' working width

One with break

Capacity 600kg - Hydraulic shut off - Disc spread - Vendor updating

Euro 8 brackets - All tines present (2 are bent) - Twin ram

3 phase - Vendor has never used it so condition unknown - Believed working - Good belts

C/w guard - Last used 2 years ago

All tines and springs present - New gate last year - Used last season - Only being sold as bought a new one - Good working order

JCB Q-fit brackets - C/w hydraulic pipes

Spares or repairs - C/w PTO shaft - Holes in lid and barrel - Tyres good - Chassis good

2 Blades (4 way & splitter) - Tyres holding air - Believed to apply 22T of pressure - 6.5hp - 208cc

Some rust/ corrosion on bed - C/w PTO shaft - Working - Skids decayed

In galvanised frame (9'3'' total width) - 31'' diameter on barrel - New bearing blocks in 2022 - Model BR8 - Water filled (will be emptied) - Part of a genuine retirement sale. There will be a viewing afternoon on Saturday 16th March between 2.00pm - 5.00pm

C/w PTO shaft - Solid tub - Hydraulic shut off

Hydraulic shut off - No PTO shaft - C/w Roll over cover - Lights to rear - Some corrosion in places

Not be used in 12 months but working when last used - C/w central box and manual - C/w road transport kit - C/w calibration kit - Fixed tyres perished - Most seed pipes need replacing - 10' working width - Rear levelling harrow - Road tyres in good condition - No holes in hopper

Lights untested - 2 row - Loading available

Approx 12' working width - All tines present - Suitable for smaller or compact tractor - 1 Stand cracked from frame - Some Corrosion on metal frame

C/w crumbler roller - Only half the PTO present - Used last season

9' Transport frame - Can be loaded with handler - Solid drawbar - Bearing blocks present - Believed to be full of water

Working order - PTO & gates new 4 years ago - Need new springs & tines - Some spare tines & new tyres & tube with it

Reversible Plough - Not used for several years - Has been dry stored - Straight

Water filled (empty now) - 2 new wooden bearing blocks

3 Point linkage - Loading available - Good working order

Spare or Repairs - Holes beginning to come at top of the barrel - Welding let go on axle joining the barrel - New lid recently fitted - No breaks - Lip reinforced

10' Wide - C/w heavy duty tines

8ft - Roller is full of oil and sand - In good working order

Purchased new in 2011 - Serial number: 1197Y10 - 6ft working width - C/w PTO - Not been used much - Stored indoors

Spares or repairs - Type D & SD70 and Model D-78 - 10ft and 8ft working width - Some damage to metering wheels on 10ft drill but metering wheels on 8ft drill in good repair - Coulters damaged on 8ft drill - Manuals for both drills

C/w PTO shaft (guard damaged) - Previous hole repair in tub - Some corrosion on frame - Wagtail present - This lot is part of a genuine dispersal sale due to relinquishing the tenancy. Viewing and inspection is welcomed by the family by appointment only. All items have had little use in recent months and inspection is advised and encouraged.

Working, used last year - C/w wagtail (replaced four years ago) - C/w PTO - Hydraulic shut off - Viewing welcome

718 - Serial Number: 154 - Help with loading available - All works - Comes with all the spare cogs for different spacing - Good show piece or working

Spares or repairs - c/w Packer roller - C/w PTO shaft - Help to load on trailer available - Two bearings have failed - Good gearbox

C/w PTO shaft - Barn stored until recently - C/w hitch for tractor - All turns over

Believed to be 1991 - 1300G capacity - C/w PTO shaft - Lights work - Brakes untested - Slight leak in back door - In working order - Pump is in good condition and works well

Spares or repairs - 800+kg capacity - Hydraulic shut off - Wagtail - Needs a new shute - In working order

Brand new, never been used

3 Point linkage - Loading available - In working order

1.3 Metre working width - Loading available - Overall good working order

Spares or Repairs - Serial number: 0149 - Capacity 1350 - C/w PTO shaft - Brakes untested

Spare or Repairs - Not used for several years - Some parts missing

Spare or Repairs - Dening & Co Chard - Vintage horse drawn roller for restoration or ornament - Frame rusted away but rolls - Cast ends in good condition

For restoration or ornament - Seized from standing

2005 JOHN DEERE 331 MOWER CONDITIONER (S/R) - Cutting width 3.31m - Loading available - Missing PTO shaft from mower to tractor - Missing PTO shaft to drive conditioner - Not used for 2/3 years - Was put away in working order but not used do to upgrade and the shafts have gone missing - Manual release blades - Steel tine conditioner - Requires PTO shafts & would go to work

2.5m working width - Loading available

Working width 3m - Bolt on/weld on tines - C/w Steel toothed packer roller - C/w PTO shaft - Loading available - Shear pin protection - 1000 Spline staft

Spare or Repairs - 3m working width - Bolt on tines - C/w Packer roller - Loading available - Bed damaged, requires new drive gears & bearings - Not used for a few years

Spares or Repairs - Capacity 2200 - Hydraulic shut off - Disc - Hole in side lets some fertiliser out

New Propeller & bearings fitted March 2023

Pin and cone brackets

As new, not used on slurry

Single row potato digger - Has been under cover - Not used for around 2 years - Needs tyres - Can assist with loading

Was used last year - Works well but needs two new wheels - Can assist with loading - C/w 2 Rear Hay Gates and one central

In well used condition - Some bearings need replacing - 1 broken disc - Can assist with loading

Cutter bar not attached & would need reattaching - Can assist with loading

Was working when last put away

3 + 1 + 1 plough - Straight solid plough - Good metalwork - Had some previous repairs - C/w Depth wheel

Twin disc - Working

9' frame - Full of concrete - Can be loaded for purchaser - Solid frame

C/w PTO - 1800KG capacity - C/w cover - Used last autumn - No lights - 24M speed - Twin disc - C/w manual - Hydraulic side shut - Small dent in front

Height adjustment needs attention - One roller & some tines missing - Last used a year ago, will need some TLC - Hydraulic folding

All rings present + complete - Some minor surface corrosion on frame - Can be loaded

12m boom - PTO driven - Hydraulic metering - Not used for 10 years, dry stored

For potatoes - Last used in 2022 - Dry stored - C/w frame for mounting on a tractor without front linkage - Missing one leg

Spares or Repairs - Flat transport tyres (been stood) - 4M crumbler roller - Does not work but reason unknown purchased as refurb project which never developed

Approx 1.7m long - C/w Motor - 3 phase - Working when removed

Straw elevator - Was working when stored (dry) - Tyres holding air - 4' Flat conveyor on end - Approx 22' to 25' long

Land driven and hydraulic

Not done much work - Wheels are not include

C/w motor - Bucket elevator - Approximately 22'-23' high/long - Can be loaded - Vertical

2 x 16' long appox (belt length) - Can be used sloped or flat - C/w motors - Removed working

C/w motors - For grain/ product transfer over a wall or similar

C/w motors - For grain/ product transfer - Working when removed

3pnt linkage mounted - designed for small/ compact tractor - Working - Owned for numerous years

Spares or Repairs - Last used 20 years ago - Can be loaded using Telehandler

Ideal for loose or fluid moving arena surfaces with a single component such as sand or rubber crumb - 2.4m wide - Complete with spare tine

Spares or repairs - Some parts missing - Metal rusted

C/w 500 Extension - C/w PTO Shaft - Very little rust for age - All free and morning

C/w PTO - Working when last used 2 years ago - Barn stored - C/w stand - C/w markers - Freely spinning - All pipes appear solid - C/w caver