MOT until August 2024 - Starts, runs & drives - ex builders truck - Reg: OV06 VSJ - 165000 Miles

Horsebox - Rigid panel van - 2.8L Diesel - REG: X844 GFB - C/w V5 - Mileage: 86,000 - 6+ owners - Manual - Brakes & lights work - Front tyres good, 2 years old with little use - Back tyres good, only 2 years old with little use - Bodywork/ interior, good - Privately serviced & DIY as & when required each year - Brake pipes showing signs of corrosion, see online MOT advisories - Will carry 2 ponies with tack/feed store - Has been a good vehicle with little use - New battery, starts first time every time - Dry stored - SORN - Test drives & viewing welcome

Commercial - 5 seat conversion - 175,000 miles - Auto - New engine at 140,000 miles - Good condition - 6 months MOT

Spares or repairs - Registration: HG54 SDZ - V5C present - 170,000 miles - 1 previous owner - Manual - Diesel - No MOT - c/w Tow hitch - Lights work - Brakes work - 2.5 engine size - 80% tread on front tyres - 80% tread on rear tyres - Off farm condition - Possible head gasket failure - Starts and runs - New bottom end bearings at 113,000 miles - Currently sorn

C/w approx 21' aluminium livestock container - 54,662KMS on clock - DAF 322 engine - Reg: T759 LJN - Last MOT: 3-4 years ago - Spares or repair - C/w sheep decks - Use to start well but batteries dead

Spares or Repairs - C/w V5 - REG: SV55 BXL - 127,000 Miles - No MOT - Runs & drives - Been used on farm as run around - Needs attention

REG: WF21 HTU - Mileage: 36,000 - C/w V5 - Diesel - Manual Gearbox - MOT until 07 March 2025 - C/w tow hitch - Lights and breaks work - Engine Size 2.5 - Front tyres 905 - Rear tyres 90% - Bodywork and Interior in good condition - Bought it brand new

Reg: AK58 VPY - C/w V5C - 122K on clock - 1 previous owner - Automatic - Petrol - MOT till 14th March 2024 although will have a full 12 months MOT by the end of the sale - 2ltr - Good tread on front and rear tyres - Good body work - Leather seats - Full service history - Drives well, no unwanted knocks or bangs - Just had engine oil and filter, 4 spark plugs and brake pads all around - High spec sat-nav, heated seats and climate control

V5 Present - 141K - Full service history - Has had lots of money spent on it - Runs & drives well - MOT till 06/2024

C/w V5 - REG: AK54 YNH - Mileage: 185664 - 4 previous owners - Diesel - Manual gearbox - C/w Tow hitch - Lights and breaks working - Engine size 2720cc - Front tyres low tread - Rear tyres low tread - Bodywork- one trim panel missing on passenger side & small dent - Interior- Middle glove box split & taped - Problems with suspension - Full service history up to 2023

Spears or Repairs - REG: ST10 EPK - Mileage: 126,000 - C/w V5 - Manual gearbox - Diesel - C/w tow hitch - Lights & breaks working - Engine Size 2.5 - Front and rear tyres in good condition - Bodywork has a few knocks and rust & interior look ok - Engine Light on & fault with 4WD, no effort has been made to identify the problem - C/w canopy - Starts, runs & drives - Not high miles but not well looked after - Needs a service & has no MOT - Sold as seen

Registration: FG05 XVC - 189,899 miles on clock - 2.4 litre engine - 35 tonnes - Aluminium body for tipping (Meshmaster 10' x 7') - MOT tested until 16th November 2024 - Mechanically sound - Still in use (so miles will go up) - Only selling as buying a newer one

REG: NX05 LSV - Mileage: 244,00 - C/w V5 - Agri Registered - Engine Size 3920cc - 1 Previous owner - Manual Gearbox - MOT until 30th November 2024 - Diesel - Lights & breaks work - Front tyres new 12 months ago - Back tyres new previous MOT - Good tidy condition all round, cab is clean - Regularly serviced by owner & pannell trucks, Launceston, Cornwall - Bought from Pannells in March 2011, milwage 190,000km approx - Fuel gauge is sometimes erratic - A good reliable truck with good williams stock container sitting on an aluminium platform - Some of the sheep decks have been taken out in order to make a good cattle partition door, which works well.

4WD - Spars or Repairs - C/w V5 - REG: OV54 VNP - Mileage: 129901 - Manual gearbox - MOT until July 2024 - Diesel - C/w Tow hitch - Lights & breaks work - Front tyres have good tread - Rear tyres have good tread - Body work & interior in good condition - Regular service - Engine has started tapping - Good reliable truck until engine started tapping

Running 18 months ago - Good tyres, front and back - Same owner for the last 10 years - Inspection welcome

3 door - 2 owners from new - 169K miles s/h - Turbo needs attention otherwise good condition for age - MOT till July - C/w private plate - Reg: X5 PHL

Beaver tail ramps - 227,567kms on clock - No MOT currently - Chequer plate bed - 14T rating - C/w winch - starts, runs, & drives - Viewing welcome

125,831 Miles - REG: YC62 GDY - No MOT Ran out 19/12/23 - Automatic - 2.2L Engine - Front tyres 80% tread - Rear tyres 50% tread - Alloy wheels - Leather interior - Climate control - Parking sensor - Paint work flaked in places - C/w Spare tyre - Bluetooth radio & satnav - C/w Spare key

723,745 km - No MOT - Digital topographic - Runs, starts & drives - 5 Speed manual gearbox - 22' Curtain length - Dry inside - Metal floor solid - Barn doors - Tyres very good - Small amount of damage on front - Some surface rust/flaking paint - Electric windows

63496km, 39454 miles - REG: PO56 DYU - 1 Owner from new - Double hydraulic extension - 2 Way tip - C/w Compressor & hose - Tyres have good tread - Has been re-sprayed (original colour white) - MOT until 30/09/2024 - 5 speed manual gearbox - C/w tow ball & pin - Good runner

REG: FX15 AUA - 66, 007 Miles on clock - Petrol - 1300CC - One previous owner - MOT to 13/02/2024 - Vendor has recently spent £1700 on it - Recent new battery - 5 Speed manual

REG: E352 WYA - No MOT - Restoration project

Honda GX200 engine - Custom red spoiler - 2WD (rear wheel) - Disc brake - Starts, runs and drives - Adjustable pedal position - From 7yr olds too young adults - Started first time on inspection

Shattaboards - Cambridge/ breaker rings - Only done 100 acres from new - Excellent order

Hydraulic shut up - Wagtail - Good clean condition - C/w PTO shaft - In working order - Been stored indoors - Used last season - Part of genuine dispersal sale, selling the farm in the spring/summer

2015 model - Working order - C/w log table

H17Z PTO driven log splitter - Fully galvanised frame

Good working order - 15 to 45hp cat 1 - Serial Number: C01263 - PTO shaft included - Reversible blades - Used for hedge coppicing job, now completed

3 Metre - Bought new on farm - Only done 25-30 acres - Hydraulic lift - Very Good condition - Working width 3 meters/ transport width 3.05metres

2006 TEAGLE TOMAHAWK 8080 TRAILED BALE SHREDDER - Electric control - Used this winter - Only being sold as coming out of a tenanted farm - Working order - Swivel suute - The bed chains are on spool valve door and suute are on electric controls

Purchased new in 2021 at a cost of £28,000.00 - C/w printing function - C/w lots of bags, 750 bags per reel - 16 reels of bags to go with machine (750 Bags each reel) - Sorting table on top of removable sections to add multiple components to bags - C/w 3 varying size funnels/ guides - C/w manual - Requires single phase electric and air supply - 10cm x 15cm bag size provided

One pass cultivator - 1 owner from new - Less than 150 acres covered - Sale due to a change in direction - C/w 10 ripper legs - 8 Discs + roller

Engine driven (lancin 678CC engine) - 5' cut - Rocking axles - Key start (working) (key in office) - Can be offset - C/w rear roller - 4 tyres all holding air

Masterdrive - C/w PTO shaft - C/w Stand - All arms and tines present - 4 wheels and tyres - C/w skirt

5,430 hours - 3 phase - Electric control panel - Has been used to make straw briquettes - Galvanised bin has 2 extension (total is 6'6'' x 6'6'' x 6'6'' high) - Last used May 2023

Lots of new wearing metal throughout the plough - C/w ground wheels (new bearings fitted) - No visible welds

C/w PTO shaft - C/w Skirt - Steel conditioner tines - Adjustable swath boards

Bought new on farm - Hydraulic folding - Had little use on small farm - Part of a genuine retirement sale. There will be a viewing afternoon on Saturday 16th March between 2.00pm - 5.00pm

Owned from new in 2016 - Good working order - Very straight and tidy

6 string - Bale ejector - good tyres - Hydraulic knotter fan - Recent new pre-chamber - Datavision touch screen control box - Believe the bale count is around 100k

Not used for 12 months

7' 6'' width - Very little use as new

Fully reconditioned - New chains, sprockets, hydraulic hoses, gearboxes reconditioned - New PTO shaft, bearings, electric and lights - Auto light clusters - New floor, new greedy boards, new tips on beaters - Full shot blast and spray - Heavy duty 16m spread rotors

THIS LOT IS NOW LOCATED AT LOT 717

Owned from new in 2016 - Good working order - Tidy machine -

Made by Fairbrother Industries LTD, Auckland, New Zealand - C/w Rock Spike - Telescopic push out - Side tilt + mass tilt - 270KG hammer weight

Water filled (empty now) - Has been welded on the drawbar

Belt baler - Needs a new slip clutch - C/w Wide angle PTO - Both tyres holding air - Some panels bent/ damaged - Belts in good condition - C/w Control Box - Lights present but untested

Working order - C/w two thirds of a donor machine for parts - Rear rolled is a caged roller and the front roller is flexi coil - C/w spare cultivator as spares

C/w 6 subsoiler legs, 2 rows of discs, rear packer roller - Hydraulic packer roller depth adjust - Very good wearing metal left - Adjustable depth subsoiler legs - Frame solid

55,000 bale count - 80 x 90 bale size - C/w Control box - C/w PTO shaft - Rear steering axle - Notter blower control box but no loom

Orbital 1.2m head - F14 Flails - C/w PTO shaft - C/w Stand - Year unknown - Serial Number: M0711019 - XTC controls - lights present - New head fitted 2 seasons ago (2021) plated - Sale due to upgrade

Re-enforced drawbar - Folds & works as it should - Can be loaded onto lorry - No date plate visible (age unknown) - 1 Tyre with good tread, 1 poor - No lights

New bushes & pins recently - Fully resprayed recently - Good hydraulic pipes - All tines present & strong - Solid Metal all over - Sale due to upgrade

Age unknown, (no plate) - New tips on feet - 5 Legs - C/w crumbler roller - C/w PTO shaft - Recently fully resprayed & new bolts fitted - No welds, all metal strong

Tidy machine - Good boards - Extra high rotors

Good working order - Not used last year - High crop flow impeller

Mounted - Working order - Recent new hydraulic motor - Swivel shute - Control box

12 metre boom - Hydraulic folding - Electric controls - Working when last used last year

Straight beam - Generally good metal work - Ready to go to work

Model year 2013 - 29,300 bale - Bought as ex demonstrator - Serviced every year by Smallridges - Bale size: 80cm x 90cm 4 string - Steering axle - Blowers on the knotters - Isobus ready - Good working order - Only selling as buying a bigger baler - Rear camera - Hydraulic tailboard - Always dry stored

REMOVED DUE TO UNFORESEEN CIRCUMSTANCES

Serial number: K2F/O2-12/700/2416 - C/w PTO shaft - Lights working - Brakes working - Light use - Still some paint inside the barrel - Tyres, light and brakes in good condition

Serial number: 2806 - C/w PTO shaft - Lights working - Brakes working - Very little use - Ready to use

Spinning disks - New rear door - Good working order - Ready for work - chains are in good condition 

C/w KRM seeder unit - New tyres - New wheel bearings - All new tines - New seeder pipes - Harrows have been shot blasted & sprayed - Working order

6 Rotor tedder - Headland kit - New Bearings fitted - Good working order

Good solid drill & power harrow - Nearly new tyres - All works as should - C/w tram lines - Year unknown

Nearly new tines - In good condition - Hydraulic folding good heavy duty machine

Believed to be 2020 - One owner from new - Put in less than 500 stakes from new - Standard weight - C/w rock spike - Hydraulic controls - Tilt all ways - Very tidy, dry stored - Purchased with a fencing project in mind which never materialised

2015 Kverneland Taarup 95110C twin rotor rake - Tyres holding air - All arms and tines present - C/w rear fenders and lights - Contour following system - One owner from new - C/w PTO - All pipes present - Sale due to lack of use

2008 Joskin Komfort 2 11,000l slurry tanker - Flotation tyres with good tread - Jurop pump - C/w PTO - Fully galvanised - Spring drawbar - C/w 2008 Joskin 4300 205DH trailing 3.6m injector and macerator - Lights to rear - C/w inspection ladder - C/w Dorsal Boom loading arm - One owner from new - Sale due to lack of use

One owner from new - 4 tyres holding air - All arms appear present with tines - C/w stand - Sale due to lack of use, would clean up well - C/w PTO shaft - One guard rail missing

Serial Number: 223 - PTO - Lights working - Breaks working - Holds 6-8 ton - Dung spreader still in use - Spreads well & fast

1 owner from new - Sale due to upgrade - Good macerator - All working as it should - Splash plate adapter frame - Inspection welcome

2019 FLINGK SAWDUST DISPENSER Left or right dispensing - JCB Q FIT bracket - Hardly used, as cannot get around corners of yards with the machine and JCB - Very tidy and good working order - This machines photos were taken just under a year ago although it has had little to no use in this time and been dry stored

10 star turner - Lights to rear - 2 owners from new - Dry stored - Working order - Serviced recently with replacement tines fitted - Sale due to downgrading to smaller machine

3m working width - Tractor with loader available for loading - Low usage - In good working order

2018 BRYCE SUMA POSTBANGER WITH QUICKFENCER STANDARD 80 NETTER - Size of weight 400kg - Rock spike included - 3 Point linkage - Hydraulic side shift, back shift, top link & leg - Telescopic mast - Little use in the last 18 months - Single strand barbed wire unroller & tensioner attached - C/w spare rope for weight - Will carry 2 x 500m rolls of net & 3 x 100m rolls - Heavy duty rock spike

C/w grass conditioner - C/w PTO shaft - Help with loading available - 2.8m cutting width - Good working order - Clutch plates renewed in 2023 - Some plastic conditioner tines required - Will be fitted with new blades - C/w A frame - Genuine sale as bought a newer one

2012 CLAAS DISCO FC3100 FRONT MOWER CONDITONER - Serial Number: 63902382 - c/w PTO shaft - 3m cutting width - Loading available - Used last season - For sale due to upgrade - Quick release blades - Steel tine conditioner - Requires A Frame

3.1m cutting width - C/w PTO shaft - Loading available - Used start of last season - Quick release blades - Steel tine conditioner - Spare blade carrier

On 'A' frame - Hydraulic driven - refurbished by Tanlake a couple years ago - New paint, pump, ect

8 Row - Serial Number: ACPNPxx13950 - Working width 6 metre - C/w Electric control box - Lights working - Owned from new - Loading available - Good working order - Not used until 2019 - Fert hopper - Land driven - Hydraulic fan driven - Hydraulic lift - Bout markers

C/w Manual - 24m Boombs - 1200 Litre tank with wash tank - Used last autumn

Jlg bolt on brackets - Good belt - Missing on gate - Belt runs true and straight

Ingersoll-rand 3 - Tool compressor with pressure vessel - Sand Blast pot - Clemco air fed helmet and hoses - The setup was last used 4 years ago & put away in the dry - Compressor shows running in video but does need a battery - Deutz 4 cylinder engine - Tyres hold air but perished are not road worthy - 2822 hrs shown on clock but has never worked

Briggs & Stratton engine - 4' cut - Adjustable height - Can be off-set - Working order

C/w packer roller - Majority of scrapers renewed less than 20 acres ago - New tines on all, less than 20 acres ago - Only used to do 20-25 ago since vendor has had the machine 12 years ago - Only reason for sale is vendor has brought power harrow air drill - Good working order - Barn stored

2019 JOHN SHEPHARD MULTI-TILL CULTIVATOR - All winders work - bearings are good

Hydraulic lid - Good chain weights - Over size tyres 500/60-22.5.

KVERNELAND 160-28 4 FURROW REVERISBLE PLOUGH - No 28 bodies - Rear disc - Steel depth wheel - Sprung legs - Good metal - Hydraulic front furrow - Ram to be fitted

Crumbler rollers back & front & levelling boards back & front - Good metal - Hydraulic folding

Good rota & auger - Stone trap - Walking wall - Good tyres - Brakes & Lights - C/w Slurry lips

C/w control box - Good condition, reliable wrapper

1.2M Head working width - 4.9M max reach - Lights not working - 3pnt linkage - Electric lollipop switches - Serial number: 19pa2797 - F10 T flails - Vendor has owned for 4 years, he has greased daily, oil and filters changed annually - Loading available - Slight gearbox leak, rear seal needs replacing - Slight bend in arm - New style 1.2M head - Vendor has cut 600+ acres with it each year ive owned it - The arm was bent hen purchased but it does not affect the use - Has recently had rotor drive collar replaced, good flails , head and roller bearings are good, runs smoothly - Both pumps in good order - Gearboxes leaks a little bit - No welding has been done on the arms - Had a new control box 2 seasons agon

1.2M head working width - 4.9M max reach - Lights not working - Electric lollipop switches - F10 T flails - Serial Number: 04PA35 - Vendoe has owned for 2 years, used as a backup machine - Not used since January 2023 - Loading available - Slight gearbox leak, head tilt ram seal needs replacing, rolle bearings gone, piggy back pump for arm controls not working - Bought as a backup machine, has done no more than 50 hours work since the vendor has had it - Does a great job, runs smoothly although the ground roller vibrates as the bearing are gone - Piggy back pump not working when I bought it so has been piped so that the rams are powered on a flow and return spool - Flails still have life in them. Original head with 2 way cutting. - Arm straight with no welding

Reversible - Rams seals gone on tunerover, will turn just slow - Very good wearing metal - C/w missing land wheel stop (needs fitting) - No cracks or welds on frame

In good condition - Was used last year but pick up reel needs attention - Viewing welcome

Was used last year - In good condition - Can assist with loading