3 feet in diameter

Boot to find EB bin for flexible auger

Boot for metal feed bin

2 x hay feeders - 2 x creep feeders - 1 creep feeder a bit bent other 3 are in good condition

Good condition - Easy to dismantle & move - Drafting gate, 2 internal pens & 2 external collection pens - C/w Foot bath - Perfect small holders/ small flock race

In working order - Selling due to upgrade

In working order - Selling due to upgrade

Head missing - In working order otherwise - Selling due to upgrade

12 volt sheep clippers with 1 second hand cutters & comb - 1 New screwdriver for removing cutters & combs - In working order - Selling due to upgrade

In working order but does need new rope - Selling due to upgrade

3 Reeler's 2 with wire plus 2 steel reel fixing posts

There is a crack at the top of the feeder but this does not affect the feeder because its above the milk line

Still in box - Ideal for liming cubicles - C/w shoulder strap - Drill not included

Still in box - Ideal for liming cubicles - C/w shoulder strap - Drill not included

Single phase - Good working order - Has clamps for fixing to stanchions

Each mat 6' x 4' - Suitable for passages, stables, parlour, cubicles etc - Some have areas cut out (see photos)

Working order

Dimensions - height 53cm, width 38cm, - Height of smaller one 38cm high, lid width 43cm, internal width of feeder 23cm

122.5'' Long (excluding mounting plates) - Very heavy duty - Made from 40mm & 30mm box steel - No rust or damage visible - 42'' High

1 x 100'' (excluding mounting) - 1 x 98.5'' (excluding mounting) - Very heavy duty - Made from 40mm & 30mm box steel - No rust or damage visible - 42'' High

1 x 90.5'' Long (excluding mounting plates) - 1 x 89.5'' long (excluding mounting plates) - Very heavy duty - Made from 40mm & 30mm box steel - No rust or damage visible - 42'' High

All between 75'' - 80'' long (excluding mounting brackets) - Very heavy duty - Made from 40mm & 30mm box steel - No rust or damage visible - 42'' High

Between 55'' - 62'' Long (excluding mounting brackets) - Very heavy duty - Made from 40mm & 30mm box steel - 1 Hurdle in this lot has damaged top bar, other two are straight & correct - 42'' High

Between 65'' - 70'' Long (excluding mounting brackets) - Very heavy duty - Made from 40mm & 30mm box steel - No rust or damage visible - 42'' High

All 12' 2'' Long (excluding mounting plates) - Very heavy duty - Made from 40mm & 30mm box steel - Straight & Strong - 42'' High

14' 2'' Long - Very heavy duty - Made from 40mm & 30mm box steel - Straight & Strong - 42'' High

Straight & strong - C/w Drop down bar & hangers - 50 & 30mm box steel - 42'' High

Straight & strong - C/w Drop down bar & hangers - 50 & 30mm Box steel - 42'' High

Straight & strong - C/w Hangers & latch - 40 & 30mm box steel - 38'' High

Straight & strong - C/w Hangers & latch - 30 & 40mm Box Steel - 38'' High - 1 x 40'' Long - 1 x 38'' Long

Straight & strong - C/w Hangers & Latches - 30-40mm box steel - 38'' High - 1 x 28'' Long - 1 x 29'' Long

Straight & strong - C/w Hangers & Latches - 30-40mm box steel - 42'' High

3' 11'' Gate x 42'' high - Straight & strong - C/w Hangers & latch - Spare sections include 27'' long with hangers - 13'' Small section - 30 & 40mm Box steel

Straight & strong - C/w Hangers & Latches - 30-40mm box steel - 38'' High

Straight & strong - C/w Hangers & Latches - Galvanised - 45'' High

2' 8'' x 21'' deep - Holds water - C/w lid + water fittings - Can be loaded for purchaser

22 doubles - Approx 3 years old - Each cubicle is 2 metres long - Buyer to remove - To be removed by 30th April 2024 - All straight and galvanised

19 singles - Approx 3 years old - Each cubicle is 2 metres long - Buyer to remove - To be removed by 30th April 2024 - All straight and galvanised

20 singles - Each cubicle is 1.8 metres long - Buyer to remove - To be removed by 30th April 2024 - 2 cubicles are bent - Galvanised - Marked B - Believed only 3 years old

Mechanically working apart from Honda engine not running (not seized but service required)

Used - Good condition

Used - Interlocking type - Some good & some fair condition

8M X 8M POULTRY REARING SHED  - Skid length and overhang 9m x 9m - Buyer to dismantle and remove on own as vendor is unable to assist - Manual wind up door (one panel on each side) - Pedestrian entrance door at one end and double entrance doors at the other - Adjustable canvas side panels - Inspection welcome 

Roughly 12 years old - Not been used for the last 3 years as upgraded to new electric crush - All lifting straps present and in good condition apart from rear leg lift has a few tears in

In good nick not cracked

Never been used and have just been lying around vednors barn

Not big enough for what vendor is needing - Both in good condition and have no cracks

Slightly bent in places but still functional

12' long approx - Working order - Kept in the dry

Galvanised - Floor solid - Gates working - Good working order - On a wheeled base

8' long - Adjustable head space - Galvanised - Solid - Both transport wheels present

No holes - Vendor will remove - Blower shute - Assistance with loading available

No holes

1.1M and 2.7M long

Good condition

C/w flexi dropper - C/w some combs and cutters - Pin bayonet - GWO

C/w spare heater element - C/w bottles,teats, whisk and bucket

Wood and metal solid

C/w C & H engineering scales - Good working order - Wooden floor solid - Some surface rust to tin

900mm - New and unused - This lot is part of a genuine dispersal, the auctioneers having sold the property. Please note there will be a viewing afternoon on Friday 2nd February 2024 between 12noon - 4.00pm and a collection day on Friday 9th February 2024 between 9.00am-5.00pm. The lots are situated at Wortha, St Neot, Liskeard, Cornwall, PL14 6QN.

Galvanised - C/w hangings and 2 latches - Timber slightly damaged and bottom slightly bent

5' high - C/w 1 hanger and latch - Slightly bent

5' high - C/w hangings and latch - Straight and strong

5' high - C/w hangings and latch - Straight and strong - 1 bar on bottom rail missing (has been previously repaired)

50'' high - C/w hangings and latch - Straight and strong

50'' high - C/w hangings and latch - Straight and strong

7' - No joining belts - Tin slightly damaged - Odd bar slightly bent

No holes - C/w fittings

Very little use - Variable output - Indicator light

Some rust in bottom - Rear timber solid but flaking - No holes in roof

Timber and tin solid - C/w feed racks

Felco foot clippers for sheep & goats - Comes complete with Battery pack, charger, rucksack, carry case, horticultural blades - Good condition - Fully working order & very little use

Timber mostly solid - 9 Head space

1 Slightly bent

Tin very bent on I - - Mesh solid

Working when last used - 240V - Will need new feed pipes

Working when last used - 240V - Will need new feed pipes

Used for heatime system

Bolts onto IAE calf trough to make it an ad lib system - 2.4m x 58cm - solid no holes

Will take 2 handler buckets - No holes in trough - C/w homemade leg/support to raise off the ground

Floor requires attention - Freely spinning - C/w 1 wooden block

Several holes in bottom tin - Odd tombstone bent

All complete - Good condition

All hold water - No fittings

Bolt on - Water tight