Used, dismantled and flat packed - 240mm x 290mm x 95mm - Approx 120-150 boxes

Sufficient steel work to create a floor of up to 200 sq metres- 49 box steel 2.5 metre high pillars (80mm x 80mm x 2.5mm thick), 54 'I' section beams (180mm x 100mm and 155mm x 90mm) in lengths between 3 and 4 metres- 220 galvanised 3 metre beams (150mm x 50mm), used at 600mm centres to support floor. 128 sections of 38mm dense tongue and groove chipboard flooring - 2.4 x 0.6 mtrs, sufficient for 184 mtr sq. Large quantity of M12 nuts and bolts, lengths of 12mm threaded rod (for stiffening beams). All dismantled - assistance with loading if required.

Interior measurements are 4' x 4' but exterior bigger - tidy

4' x 4' internal measurements, exterior is bigger - Tidy

2.4m x 3.0m frame of 150 x 75mm steel channel, formed of two 3 mtr lengths and five-  2.3 mtr cross members.-Galvanised steel  'walkway' plate with 130mm flat steel kickplate around the edge- All nuts, bolts and clips to assemble.- All dismantled - assistance with loading if required.

Not bunded - Empty, used for central heating oil

Never been fitted - Surplus part of installed system - Inlet + outlet (50mm) - Drain cover on top - Internal pump within

Part roll - Approx 20-30m in length

35mm diameter - 14 x 2.3m lengths - Approx 40 x 80cm lengths - approx 30 x 50cm lengths - Large amount of fixings, straight joiners and corners

Melamine coated shelf/ bench - 2.4m long x 0.8 wide (adjustable height

Bay of boltless rapid racking - 5' x 2' bay - 6 chip board shelves

2 bays of boltless rapid racking - 3' x 4' bay - 18 shelves (3' x 2') 2 per shelf - More steelwork than shelves

2 bays of boltless rapid racking - 2' x 4' bay - 20 shelves

2 bays of boltless racking - 1' x 4' bay - 15 shelves

2 bays of boltless racking - 4' x 3' bay - 7 shelves

2 bays of boltless racking - 1' x 3' bay - 18 shelves

2 bays of boltless racking - 15'' x 4' bays - 14 shelves

4 bays of boltless racking - 5' x 1' bays - 34 shelves

For doorways or similar - Cable feeds into liner

Untested but was previously working - 2 x strip lights - 1 x cable lengths

300 SDC 5 - A19-5.5 X 145 SELF DRILLING TEX SCREWS - C/w plastic caps.

Old but works - Bag can be stationed underneath

Not used for 15 years - This lot is part of a dispersal, the Auctioneers having sold the farm

Approx 21'' high - Approx 14'' diameter - Lid unscrews - This lot is part of a dispersal, the Auctioneers having sold the farm

6' cut - Last used 5 years ago in garden - Working when last used - This lot is part of a dispersal, the Auctioneers having sold the farm

Marked 'C Chapman, Caudworthy' - This lot is part of a dispersal, the Auctioneers having sold the farm

Metal - Believed no holes - Comes with marking guage

Mixed sizes

C/w wheels - Only surface rust

Starts + runs - Both paddles present - Good wheels

Box is 9' long 4'' x 4'' - RSJ is 116'' x 7'' x 4''

1.75m long as they are

Good blade used recently - Good working order

Working order - No fittings on end of pipe

C/w carrier (bolts on trailer) - Ramps are 14'' wide - Chequer plate

2' diameter - 9'8''

2' diameter - Approx 10' long

2' diameter - Approx 10' long

4'2'' x 29'' external measurements - 43.5'' x 23'' internal measurements - C/w 1 cover

Can be loaded by prior arrangement - 31,061 hours - Used on campsite this summer due to unforeseen circumstances - Run for 8-9 hours most of the days over last six months and worked very reliably - Pallet fork slots

Only selling as Vendor never uses it - Good condition - Came off Land Rover as in picture

C/w bottom outlet - C/w mantle on top

Eltex poultry feeder - Glav watering can

Solid wooden frame - C/w Halogen front lights

Very, very heavy - Suspected to be 10 tonnes - No cracks - 17' 6'' wide - 10' high -10'' thick - Some assistance to load is necessary

10'' thick and 22'' square ends - 19' 6'' wide - 4' 8'' high - 6.8T in weight - Some assistance to load if necessary will go between 20' shed guards

10'' thick and 22'' square ends - Would be ideal for a bridge

Done little work and starts well

Ex next box top/sides - All 8' long but various widths

Approx 11' long

Been used as a fuel tank for a backup generator so has two fuel lines fitted for running for generator

Removed from a fully working commercial building that was being developed - Have only been use for approx 7 years - Any test welcome before the end of the auction

Removed from a fully working commercial building that was being developed - Have only been use for approx 7 years - Any test welcome before the end of the auction

Removed from a fully working commercial building that was being developed - Have only been use for approx 7 years - Any test welcome before the end of the auction

Removed from a fully working commercial building that was being developed - Have only been use for approx 7 years - Any test welcome before the end of the auction

Removed from a fully working commercial building that was being developed - Have only been use for approx 7 years - Any test welcome before the end of the auction

Removed from a fully working commercial building that was being developed - Have only been use for approx 7 years - Any test welcome before the end of the auction

Removed from a fully working commercial building that was being developed - Have only been use for approx 7 years - Any test welcome before the end of the auction

Removed from a fully working commercial building that was being developed - Have only been use for approx 7 years - Any test welcome before the end of the auction

Now unavailable due to a change in circumstances - Apologies for any inconvenience caused.  Good condition with no leaks or splits/damage - Has a mains fuel pump fitted and no bottom outlet

Removed from a fully working commercial building that was being developed - Have only been use for approx 7 years - Any test welcome before the end of the auction

C/w non return valves

C/w 1 riser

C/w 2 risers

C/w rodding points

Double ends