VENTILATION FAN 28"(1) - Came from a working system. - Some surface rust but frame and fan are solid.

VENTILATION FAN 28" (2) - Came from working system. - Some surface rust but frame and fan are solid

VENTILATION FAN 28" (3) - Came from a working system - Some surface rust but frame and fan are solid

VENTILATION FAN 28" (4) - Came from a working system. - Some surface rust but frame and fan are solid

VENTILATION FAN 28" (5) - Came from working system. - Some surface rust but frame and fan are solid

VENTILATION FAN 28" (6) - Came from a working system - Some surface rust but frame and fan solid.

VENTILATION FAN 28" (7) - Came from a working system - Some surface rust but frame and fan solid.

VENTILATION FAN 28" (8) - Came from a working system. - Some surface rust but frame and fan solid.

6 X ACRO PROPS - Closed length 1.75m Open length 3.10m. - All turn freely and move easily.

7 X SPRING TIME CULTIVATOR TINES

3 X 20KG WEIGHTS

2 X LARGE GROUND ANCHOR SCREWS

CONVEYOR BELT(1)50CM WIDE APPROX 80CM LONG - From an automatic egg collection system.

CONVEYOR BELT (2)50CM WIDE APPROX 80CM LONG - From an automatic egg collection system.

CONVEYOR BELT(3) 50CM WIDE APPROX 80CM LONG - From an automatic egg collection system.

WATER HEATER Duplex stainless steel water heater - 1.5m high - 0.45m diameter - Approx 200 litres

WATER TANK Wydale - 450 litre baffled water tank - Never been used

NEW RIV 6" GLADIO KNIFE GATE VALVE O rings included

SUPER SINGLE MUDGUARDS 385/65/22.5 4 x plastic mudguard and brackets for 385/65/22.5 super single wheels - Brackets are 35mm cranked single bolt hole arms

LARGE PALLET OF USED HYDRAULIC HOSES Removed from machines for reconditioning - Various states, some as new, some with quick release couplings

PALLET OF MILLING MACHINE & LATHE SPARES Milling Clamps - Milling Tools - Lathe Mount and Steady Chucks

16 NEW HEAVY DUTY WELD ON BIG BALE TINES Full set

HAKKI PILKE 16 WAY LOG SPLITTER 28" wide - Came off a Hakki Pilke X47 wood processor - Never been used

CANOPY FOR PICK- UP WITH LOADING RAMP Alloy & galvanised steel - 224cm x 158cm - Good condition apart from small cut just above air vent (see photo)

1000L NON BUNDED DIESEL TANK

BELIEVED STANDEN 4' BED FORMER/ TILLER Spares and repairs - Not used for many years - Complete with horstine micro band applicator (needs attention)

POWER WASHER EXTENSION HOSE FITTINGS 30M long on winder and trolley

5 X ACRO PROPS ALL TURN/MOVE FREELY

VIBRATING CONCRETE POKER BARN S/R

TRACTOR LOADER BRACKETS Came off a John Deere 2140. - Unsure of what model of loader it requires - Full length 77 1/2" approx

JOHN DEERE HYDRAULIC RAM NEW Part number: AL61553 - SINGLE acting steering hydraulic ram, bought in error

12 ANTI PERCH RIDGE CAPS FOR NEST BOXES Could be used as normal ridge caps - 3m long - Some surface rust but generally solid

12 ANTI PERCH RIDGE CAPS FOR NEST BOXES Could be used as normal ridge caps - 3m long - Some surface rust but generally solid

LARGE AIR CONDITION UNIT In working order

GARDEN CHIPPER/SHREDDER Towable off road or moveable by hand - Starts and runs

LARGE SITE MIXER Petter single cylinder diesel engine - Starts well - Runs and turns freely

2013 STIHL MS181 MODEL In good condition - Privately owned - Done approximately 2-3 hours work/year since new - 16" bar with sharp chain - starts and runs like new

ECHO CS-310ES 14" bar - Start and runs - Done very little work

1200L FUEL OR WATER BOWSER

HONDA GENERATOR Spares or Repairs - Engine runs but needs capacitor for generator side

LARGE PILLAR DRILL STAND

1000 LTR TANK Good order

CLARKE 145TN TURBO WELDER Had little use

SILVERLINE BENCH VICE 4" Jaw - Good condition

LARGE GALV WHEEL BARROW Huge capacity - One tyre flat - Suitable for equine or farm use - Hold water - Solid frame

2 JOHN DEERE 6400 MUDGUARDS C/w brackets - Some damage on plastics

15FT X 16FT ROLLER DOOR Bottom has slight damage and therefore would be more suitable to be re-purposed for lower shed aprrox 12ft - c/w runners + new hanging brackets - Will need new bearings - Manual winding

DRAPER EXPERT LEAF BLOWER Never started or had fuel in it but has been stored for numerous years

GAS TORCH ACCESSORIES Various parts

SPOOL BLOCK Unknown origin

24V TAIL LIFT PUMP UNIT Working when removed

SINGLE PHASE MOTOR Removed from pressure washer - Working when removed

FUEL DELIEVERY HOSE Manual pump

POWER ASSIST RAM KIT As new - Possibly David Brown but unsure

4 TON CABLE PULLER As new in box

BOLENS SUPERHAWK CHIPPER - Briggs and Stratton 8hp engine - Recently used, working order - Up to 4" Feed - Flail cutting - Dry Stored

TFM ALLOY TOP To fit John Deere Gator model 865M - In very good order

SOLID PLASTIC WATER CONTAINER 2.5ft x 3ft x 2.5ft solid plastic water container with threaded out let for a tap - Good solid tank with no leaks - has very good sealing lid with ally clamp

JOHN DEERE WEIGHT BLOCK Full set of 16 wafer weights and bolster - On a 3 point linkage frame

JOHN DEERE FRONT WEIGHT BLOCK/TOOLBOX With 2001 internal tank for diesel - Weighs approx 1300kg dry - Front bumper rail opening lid - LED lights

2001 BARREL OF ADBLUE 3/4 full to include pump and hose

SELECTION OF USED PTO PARTS

SELECTION OF HEDGE TRIMMER FLAILS McConnel F10 handy spares

HYDRAULIC RAM Removed from shear grab - Ideal for log splitter

HYDRAULIC JACK STAND Ideal for log spliter

SMALL HYDRAULIC RAM

JOHN DEERE MIRRORS

JOHN DEERE DOUBLE MIRRORS

JOHN DEERE MIRRORS Guards still on mirrorS

FORDSON MAJOR POWER STEERING KIT C/w all brackets etc to fit - Bonnet guard

3 X FRONT MUDGUARDS FOR 4WD TRACTOR

DOWDESWELL PLOUGH METAL YCN metal bought for a DP100 Delta Furrow - No longer have plough, some metal used

OLD HYDRAULIC TOP LINK AND LINKAGE STAY

A FRAME Red quick release - One attachment, point slightly bent but working otherwise

A FRAME Blue quick release - One attachment, point slightly bent but working otherwise

FEMALE WELD ON A FRAME ATTACHMENT

PAIR OF LIGHTING BOARDS

SULKY FERTILISER SPREADER PARTS New Sulky fertiliser spreader parts including cover

OIL DISPENSER Cabinet rough - Has good glass oil pumps inside

CYLINDER MOWER SHARPENING TOOL Motor works - Unsure how it goes together

LANDROVER SERIES 1 DOORS Window missing - Handles need replacing

MASSEY FERGUSON 165 PICK UP HITCH T BAR

DAVID BROWN 780 PCIK UP HITCH Believed to be for a David Brown 780

ALUMINIUM CHECKER PLATE MIRROR GUARDS For tractor - Vertical and Horizontal fitment - For Case, New Holland and Massey

KMR STAPLE GUN C/w 3,000 approx staples with it - Serviced recently - Working order

GREEN POWDER COATED SECURITY GATE Size: 1.1 metre wide x 3 metre high - c/w Sliding bolt latch + drop catch

2 JACKSON SECURITY GATES 1.4 metres wide x 2.0 metres high (each one) - c/w handles/ lock + some hangings

2 METAL MESH SECURITY GATES 3.0 metres wide x 2.1 metres high (each one) - c/ Hangings + slide latch

2 METAL MESH SECURITY GATES 3.0 metres wide x 2.1 metres high (each one) - One with hangings - c/w slide latch

2 PEDESTRAIN GATES WITH INNER FRAME 1.2 metres wide x 2.5 metres high (each one) - Wicket gate

2 MESH GATES 1.05 metres wide x 2.3 metres high (each one) - No hangings - c/w sliding latches

PALLET OF 60 ROLLS OF BARBED WIRE Each roll is 200 metres of Tornada High Tensile 1.6mm barbed wire

PLASTIC LAND ROVER DEFENDER 'A' BAR

10 FRONT TRACTOR WEIGHT Came off Ford 7810 - 3 slightly bigger weight marked 33kg

MILL MASTER FRONT END LOADER C/w 1.1 metre dung forks + 1.1 metre bucket (both rust damage) - Came off Massey Ferguson 135 - c/w link for a Perry loader

PAIR OF JOHN DEERE FRONT MUDGUARDS Came of John Deere 6310 - New plastics

9 HOLE TRACTOR DRAW BAR CAT 1 Linkage

2008 DOLMAR PS45 CHAINSAW 14" bar - 2 stroke - Good working order

EURO 8 HEADSTOCK BRACKET

BALMORAL BRM V2270 PLASTIC FUEL TANK Not bunded - c/w dispenser