Search

Marked as 1 - 5' 4'' diameter x 3' high - C/w pins - Good condition (but one broken rail)

Marked as 2 - 5'4''' diameter x 3' high - C/w pins - Good condition

Galvanised - Good condition - Little use

Can be used on alpaca as well - Good working order - C/w sheep cutter & comb - 240v - 50/60 Hz - 320 watts

240v - Working order - Recently has had a full service - C/w 5 cutters and combs - All sharp

22'' x 13'' x 19'' deep - Rusty but useable

1 is 7'9'' long - 1 is 45'' long - Slightly bent

Aluminium

ROUND SHEEP FEEDER

1500m spools when new - Not much used off each spool

ROUND SHEEP FEEDER

Has had little use - Plastic knobs have gone brittle and broken off

ROUND SHEEP FEEDER

ROUND SHEEP FEEDER

Wide straps for a good secure fit - Large, easy-grip buckles - Compatible with most leading brands of crayon

Wide straps for a good secure fit - Large, easy-grip buckles - Compatible with most leading brands of crayon

41' long - 7'' diameter - C/w PTO - Tyres holding air but perished - No holes in hopper or frame

C/w some fittings - Individual yokes -

Dished bottom - Originally used for mixing wet mix pig feed but has not been used for that purpose for a long time

Has been used for pig feeding - 5.5hp single phase motor with starter - Working when last used but not been used for several years

Ideal for garden planter - Did still hold water the last time it was used - 66cm wide x 55cm high x 183cm long - Very heavy - Can be loaded with forklift if required - Chip on top edge (photographed)

Both well used but in reasonable order

Spares or repair - 2 x 9' - 2 x 8' - Very well used, worn, missing parts and damaged

2 x 13'8'' long (excluding hangers) - 3 x 13'11'' long (excluding hangers) - To fit 14'-15' bays with adjustment on hangers and mounting - Bottoms damaged on nearly all of them and will need repair - Heavy duty metalwork, very heavy - Timber also needs repair - Can be loaded for buyer - If unsold as a group of 5, vendor would split

Approx 9' - Last used 3 years ago

Non chafe - Unopened green crayon - Lightly used on a high health status farm - All buckles secure and working - For sale as surplus to requirements - Can be used on bucks/billies for breeding goats

Non chafe - Used on a high health status farm - All buckles secure and working - Slightly scuffed in places - For sale as surplus to requirements - Can be used on bucks/billies for breeding goats

Unopened green crayon - Lightly used on a high health status farm - All buckles secure and working - For sale as surplus to requirements - Can be used on bucks/billies for breeding goats

Non chafe - Used on a high health status farm - All buckles secure and working - Worn/chewed in places but still functional - For sale as surplus to requirements - Can be used on bucks/billies for breeding goats

With hay rack - Only used once - Good condition - Approx 8' 4''

Has been attached to trailer so easier to take on and off - Good working order

C/W foot trimming kit - Suits smaller cows, was originally used with a Friesian dairy herd in the 1990's/2000's - Galvanised - Good condition - Chequer plate floor - All foot trimming attachments present - Winding handle to lift hip/leg requires attention at the rear of the crush - Yoke works well - Has brackets welded on to accommodate Tru-Test MP1010 Load Cells - Additional brackets welded on rear to join hurdle on

2050mm high x 1230mm wide x 880mm deep - Rusty but functional - 3 internal wooden shelves - Lockable barn style doors - Approved in previous Red Tractor Audits

1 x double ended lambing rope - 2 x prolapse spoons - 4 x prolapse harnesses - 2 x ram harnesses (aged leather material) - Can be couriered by separate negotiation with the vendor

Slightly misshaped but perfectly useable

F030 2025 07 - 1355mm high x 2500mm wide x 1875mm deep - Slight rusting in feed tray - Damage to lift up lid, fixable with rivets or tek screws - Built in 3 point linkage and pallet fork lifting points - The lift-up hopper lid slides forward on nylon rollers - Front apertures have plenty of adjustments with 3 height settings and 2 width settings - The cross bar sits in a pair of brackets with 3 locations and is secured with an R-clip and peg - Each bar is secured with an R-clip and peg

Needs some repairs to wood

Needs some repairs to wood

Needs some repairs to wood

Needs some repairs to wood

15' 9'' long x 4' 3'' wide - Sides are 22'' high - Marked 14 - This lot is part of an ongoing dispersal. The vendor has ceased milking and is relinquishing the tenancy

Only a couple of years old

Volume: 24.00m3 - Has leg extensions - Height: 8.83m - Good condition - For sale due to upgrading to a bigger model

Good condition, with some minor bends - 2 approx 14' long - 2 approx 15' long