Search

Swing over, A frame

Good condition - Tail gate

Quicke brackets - Tines all present - Some rust holes

Quicke brackets - Lots of rust holes

5'3'' wide - Sound floor - Chiltern brackets - Good condition

4' 7'' wide frame - Spikes 34'' long - Chiltern brackets

4'2'' wide - Chiltern brackets - Good condition - Used recently - All tines and cutters present

Chiltern brackets - 2008 - Some perishing on pipework - All tines present - Some cutters broken off - Still usable if cutters repaired

Good order - Straight tines - Pin and cone brackets (Matbro) - Very strong

Home made - Very strong - Matbro pin and cone brackets - Middle sleeve for extra spike - Working order

6' wide - Good condition - Had little use

Came off a 2000 hour machine - C/w locking pin & ram.

Quick hitch 45mm pins - Strickland 2' bucket never been used.

New and never fitted - 2021 year - No brackets (frame only) - C/w instruction manual - Euro 8 headstock

Very tidy - Tines all present - Has had another set of brackets welded on

Brackets unknown - As new - Very little use

No brackets welded on - 2 new pipes - Pin & bushes tight - Non removable sleeves - Can be loaded

Euro 8 brackets - Removable tubes for the bale spikes - One spike has slight bend, doesn't effect use

Good condition for age - Rams in good condition with no leaks - All working as it should be - Handy bit of kit - Loading available

Six months old - 7ft width - Euro 8 bracket - Done hardly any work - No faults at all - Selling as too big for tractor

Straight and strong dunk fork - Not seen a lot of work

Useful size bucket - See the crack and small holes in the picture

Approx 7' - JCB brackets - Needs some repairs as shown in picture - Loading available

Spares or repairs - C/w Euro 8 brackets - Spares or repairs as needs new hydraulic pipes - Missing one top tine and a bottom tine - Hole bracket for bottom tine is damaged

147cm wide - Rear door drops - Bought new on farm and done little work - C/w tipping catch - 3 point linkage

Removed from International B250 - All complete - C/w bucket & tipping ram

Tractor mounted - Cat 1 pin size - 1.1m width - 200l hopper - This has never been used but is very shop soiled

Euro bracket - 1.75m width - Brand new never used

Euro brackets - 1200mm length of forks - Very shop soiled

On euro brackets - 1.55m width - New unused

Suitable for MF135 or similar - Loader boom - Heavy duty bale spike - Concrete weight block - Mechanical loading can be arranged but vendor requires a few days notice to organise

Little work

Euro 8 brackets - Max 1500kg each arm - Tidy - Surplus to requirements

Euro 8 brackets - Very good edge, had little use

On euro brackets, BRU200 - 2.0m width - As new only used a handful of times

Was a shear grab - Several tines missing - Quicke 3 brackets

Cat 1

Two 2 foot spikes - Tines are loose

To fit a JCB telehandler - May need new bushes

Solid spikes, option for 3rd spike - Old style Quicke brackets

Solid spikes - Believed to be Faucheux brackets

Some small holes/rust flaking - Believed old style Faucheux/Quicke brackets

Very heavy (steel welded to bottom) - Solid

Marked 10 - Chilton brackets - All tines present - Some rust/corrosion - This lot is part of a genuine dispersal due to bereavement. All lots are available to view & collect by appointment with the vendors.

Marked 11 - Chilton brackets - Some damage/small hole - Could be repaired - This lot is part of a genuine dispersal due to bereavement. All lots are available to view & collect by appointment with the vendors.

Marked 12 - Chilton brackets - 1 spike, option to fit second if required - This lot is part of a genuine dispersal due to bereavement. All lots are available to view & collect by appointment with the vendors.

C/w manitou brackets - Outside tines have been taken off - Working order - Twin ram

1.7m wide - All tines present - Pipes good - Very little use, like new - Side tines - Euro 8 brackets - Rams have slight rust blemishes but do not leak

Have been cut off with gas.

To fit Merlo - 7'9'' wide - Good strong bucket - Some cracking/splitting to bottom

Spares or repair - 7'6'' wide - Very rusty - JCB brackets - 1 tine missing and part of grab tines - Some rust pits on rams

Quicke No3 brackets - Some rust holes in base - Useable condition

On Manitou brackets - Strong bucket, some wear on cutting edge and a few holes in bottom - Galvanised sutton brush - Has had a repair on arm - Brush good

Manitou brackets - 1780 litre capacity - Blade in good order - Little use - No holes - Only used for grain

Age unknown - Size: 6' Wide x 4' Deep x 3' High - Small hole in wooden base - 3 point linkage attachment

Pin & Cone brackets - Approx 5 tines damaged - Pipes present - Some damage to mesh - Vendor has the rams but not fitted

Hard PX tines - Good working order - Some rust on rams - Chilton brackets - Done little work for age - Genuine dispersal due to relinquishing farm tenancy.

Good working order - Chilton brackets - Genuine dispersal due to relinquishing farm tenancy.

Usable but would benefit with some tlc -

Manitou brackets - All in good working order - 1 missing tine - 1 bent

Manitou brackets - Good working order

Euro brackets - Good working condition - Used a handful of times

Euro 8 brackets - Grab tines all present just need realining

With manual trip tip - Selling as no longer needed - In overall good condition - Some surface rust/blistering on base but still sound

Quicke 3 brackets.

Spares or repair - 6' width - Would make grain bucket with bit on welding or could be repaired for feeder bucket - Chipper end damaged

Euro bracket - Four tine bale spike

Spares or repair - Euro 8 brackets - Age and brand unknown - Needs attention/welding but repairable - All tines present - No rams or hoses

In working order - Used until recently - 7' wide - Tines all present and straight - Sanderson brackets - Selling due to upgrade

Spares or repairs - Some pipes missing - Some rust spots on rams - All tines present and straight - Sanderson brackets

Couple of tines bent - 5' wide - Not been used for a while - Sanderson brackets

Spares or repairs - 5' 6'' wide - One pipe missing - Some welds on frame - Sanderson brackets - Only 1 tine left

3 point post/stake carrier - Ideal for transporting fencing stakes and posts

C/w lifting hook on boom end - Fits standard 4'' pallet forks - Boom extends 2' 4'' (700mm) beyond end of forks - Loading available

6' x 4' - Loading available

Manitou brackets - All in good working order - Missing pipe will be replaced before collection - 1 tine slightly bent - 1 missing tine

Bobcat bracket - Good condition

Slight crack on centre knife - Manitou bracket

Euro brackets - As new condition only been used for light use previously

New old stock, Sparex - Euro brackets - Frame overall height 1100MM, overall width: 1838MM, Tine spacing: 560MM - C/w 4 x M28 x 1.5 square tines, 1100MM long - Loading available

New/ Sparex - Euro -

Cat 1/2 three point linkage bale spike - C/w folding spikes for transport

Spares or repairs - Very strong sides & back plate but some holes in floor - Requires plating - Sanderson brackets

Spares or repairs - Very strong - Cutting edge good - Few minor holes in bottom - Kramer brackets

60mm pins

Euro 8 brackets - Top bar needs welding.

Pin and cone bracket - Useful attachment

Fits on front loader spikes - Carrier is approx 173cm x 126cm

Fitted with MX brackets - Good condition - Selling due to retirement

On Euro 8 brackets - Clips present - 40'' long

Pin and cone brackets - Little use - Pipes good

Good condition

Hydraulic tipping - 3 point linkage - Little use

1m long - Adjustable width - No damage/cracks.

Unused - Twin bale spike new and unused

Attachment to a 390, 880 loader - Forks are 4' - Only forks unit for sale

Including rams and a spare spike - Previously fitted to a David Brown