Search

Working order but does require 1 new cable on controls - Mounted machine - Swivel shute

Serial No: B11626 - Head working width 1.2 - Maximum reach 5.7m - PTO - Electric joy stick - Lights working - 3 point linkage - T flails - 1 owner from new - Loading is available with telehandler on site - Farmer owned since new - Done approx 250 acres a year - Regularly greased - Selling due to upgrade to larger machine

C/w PTO shaft - Brakes and lights working - Tyres have good tread - Holding air but perished - Hydraulic door (no rust on ram) - Auger and tub in good condition - Agitator missing - Working order

C/w PTO - Nylon conditioner tines - Barn stored - Not be used for a number of years - Hydraulic fold around - Blades would benefit from being changed - Hydraulic pipes perished - Skirt in good condition

To fit any tractor (steering wheel center box currently to fit fendt) - John Deere 2600 screen with SF1 activation & mounting bracket - Greenstar 3000 Receiver - Autotrac universal steering wheel - Roof mount bar - 2x wiring looms & extra resume switch

New tyres - All tines present & good condition - C/w control box

Serial Number: 4087 - In good working order - Imported from the US and installed in 2019 and used for sand recovery from dairy manure until 2025 - Supplied with replacement secondary auger outer housing as per picture and motor (0.75kw 3Ph) and screen for secondary auger is not fitted but included and is displayed in separate picture from the main frame. - Comes principally in 2 units, the main carrier frame with motor (2.2kw 3Ph) and main bearings and secondary auger fitted while the the main auger has been seperated for transport - The auger looks in good condition for age but some welding on the bottom flight would be advisable before installation - Was in good working order when last used, last summer - Feel free to call for more information. https://www.daritech.com/

Serial Number: 2123 - in good working order - Imported from the US and installed in 2019 - Daritech DT360, purchased new from importer in 2019. The mesh was replaced in approx 2023 - Motor (0.75KW 3Ph) and gear box all in good working order when last used in summer 2025. - Dt360 is a well regarded dewatering piece of equipment. All stainless steel. - Feel free to call for more information. https://www.daritech.com/products/manure-management/

Serial Number: 3406 - In good working order, 2015 model purchased ex demo and commissioned in 2019 and used up until summer 2025 - Comes with 1 reconditioned roller and another used roller as per picture - This piece of equipment is typically used in tandem with a DT360 to achieve low to mid 30% DM stackable solids - Feel free to call for more information.

Sand rake with Manitou brackets to level sand cubicle beds - Hardly been used

2004 Keenan Klassik 170 Feeder Wagon - Spares or repair - Bought in working order a few years ago but never used by present owner - Lights need attention - One flat tyre and one holding air - No PTO shaft - Lots of good parts

Age unknown - 750mm wrap size - Nice simple wrapper - C/w cable controls - Mechanical knife - Electric counter (not original) - Bale count unknown - 4 new turn table belts last year - One new tyre last year - Used this season

Year unknown - PTO shaft - Lights not working and brakes untested - Rotor blades need replacing - Spreader in good working order - Comes with agitator

Fitted with hopper extension, hydraulic crane - Weight cell system - Boarder control - Amatron 3 electric control box - 18 mtr-24mtr disc's fitted - C/w PTO shaft - Not be used for 4 months - Selling due to upgrade - Holds 4 bags comfortably

Amazone ZA-M Maxis fertiliser spreader - Twin disc - C/w hopper extension and boarder control - Set up to 12 metre spread width - Been oiled up and put away indoors - Lights present but not tested

DR4204R - Last used in 2025 - Please note no PTO is with this machine - Capable of 4 different functions being: spreading, tedding, side raking and centre raking - This lot is part of an unreserved genuine dispersal to dissolve a partnership.

Spares or repairs - One star needs new hood on top of star - C/w PTO - Last used in 2025 - This lot is part of an unreserved genuine dispersal to dissolve a partnership.

Fitted with 2014 Pichon Rampe 12m dribble bar - Self loading arm - Good tyres 650/65 R30.5 - Galvanised tank - Fitted slope control kit and weight transfer - Holds 3,500 gallon approx - Hydraulic brakes and air - Lights present - Rear steer - 80mm ball hitch - 13,800L/min 1000rpm vacuum pump - Has had very little use

2018 Chapman machinery RM120 rotary mower - Owned from new - Starts, runs and works as should - Used recently - Right hand tyre slowly loses air otherwise holds air fine - Has had little use - Honda GXV 390 engine

Independent oil tank and pump - Hydraulic legs - 2 buckets (16'' and 12'' with ejector)

PTO driven - Used last year - Working order - C/w 4 way splitter - C/w 38cm long saw blade - C/w Hakke Pilke log table which has had little use but has a bent support frame - Log table is approx 7' wide X 8' long - This lot is part of an unreserved genuine dispersal to dissolve a partnership.

Really strong and well made tool - No PTO Shaft, used as normal subsoiler - One owner from new - Knock on feet - For sale due to change in farming practise (now practising low disturbance).

Brand new and never used - Still clean, no wear on flails/housing - 800mm cut width Y flails - 40mm pin hitch for 2-4T mini digger - Dual pin brackets fitted - Hydraulic motor and hoses included - Ready to bolt on and work - Head working width 800mm - No PTO shaft - Service history from new - No faults

Used this year - Good working order - Only being sold as vendor has bought a twin rotor rake - All tines present - C/w PTO

Pottinger Faro 3500 Rotomatic Forage Wagon - Bought new on farm - Only used on one farm - Used this year - Working order - Only being sold as no longer zero graze - Flotation tyres (19.0/45-17) - C/w full set of blades and part spare set - 1.9m pick up - Good floor and solid back door - Generally dry stored

Bought as ex demo on farm - 10,347 bales on bale count - C/w control box - Only being sold as farm now using contractor - Used this year - Good working order - Used for grass and straw - 13 knives - Recent new main chain put in (old chain is a spare) - New chain has only done approx 200 bales - Auto lube - 6' pick up - PTO

Serial No: 000048955 - 4 new wearing points included - 3m working width - Instruction manual - Spare parts manual - Telehandler available for loading

Unknown year - Very tidy and fully working - Working width 4.6m - Includes LED lights - Hydraulic folding - No known faults Telehandler available for loading

Home made solid frame with flexicoil packer - 5 McConnel Shakerator legs with knock on points - Working width 2.5m - No known faults - Telehandler available for loading

Suit quad bike or compact tractor - Kawasaki FA210 engine - Tyres holding air - Bought 12 months ago & never used - Was working when purchased - Engine starts & runs - 3 pick up

Good working order - SN: 06-10042 - Always barn stored - C/w extended log guide, new PTO shaft - Blade in good order - Believe to be a 2008 model, 540 PTO - Good little machine

Both full - Bungs present - Bearings ok - Framework solid - Can be loaded for purchaser if required - Viewings & Enquiries welcome

Cat 2 - Requires a min 40hp to operate - 1.4m working width - SN: 202100525026 - C/w PTO - Loading available - Has had little use

Swivel shoot - Electric controls - 2 speed gearbox - One farm from new - Runs nicely, as shown in video - Loading available

SN: 74901178 - C/w control box - C/w PTO shaft - Good working order - Used this season 2026 - Made 500 round bales - New roller bearing start of season - Serviced by main dealer

SN: 3476003 - Good working order but will need new knives or use as it is

Working order but needs to be re-lined on rear right hand side

Trailed Teagle Tomahawk Straw Chopper - Lights working - Swivel shute - Remote control/bluetooth controls with everything working as it should - Tyres in very good condition - One previous owner - Had little work over last 3 years - Straight PTO - C/w manual

All in working order - Tyres like new - Rollers are full but can be emptied - Has filling bungs - Loading available

C/w additive pump and mineral hopper - High output machine - Good working order - C/w PTO shaft - Lights working - Mechanical loading available - Maximum lorry size access available

Serial No: 025995 - C/w control box - Adjustable rate - Wheel eradicators - Hydraulic packer adjustment - Pre emergence markers - Following harrows - Low level tank sensor - 1000RPM gearbox - Always barn stored - Sprayed with oil each year - Bout markers - Lots of metal left on Kverneland tines - C/w operator book (as pictured) - Has some spares - Lights and PTO working - Vendor owned for over 20 years - Loading available

Unused and like new - Serial No: 2404102 - C/w extras in the form of calibration hopper and 1 outlet rotor meter 5mm seed roller kit (for fine seed) - C/w control box

Serial No: EUII1460C4637 - 14 cubic meters capacity - C/w PTO shaft - Lights untested - Working electric weigh display - Blades are well worn, no holes in auger - Tyres worn and may need attention before driving away however holding air - Mixes pit silage well, ability to feed out both sides, original condition - The right hand elevator needs a new motor and possibly a belt

Conventional baler - Serial no. 3937 - C/w PTO shaft - No control box - Baled 1500 bales, rarely missed a knot - Mechanical loading available - Maximum 45' lorry access available.

Conventional baler - C/w PTO shaft - Serial No. 3836 - Fully serviced & knotters fully serviced - Recent invoice to prove this work - Good working baler - Mechanical loading available - Maximum 45' lorry access available.

Tyres holding air - One owner from new - C/w PTO shaft - All tines present - C/w prop - Previous weld repair on one pivot as pictured but still functions - Hydraulic folding - One pin need re-lining/bushing and pictured

In good working order - Not done much work - Full guarded PTO - Solid deck with NO holes - Good blades all present - All four wheels work work fine and move freely - Comes with brand new mulching kit to make it mulch the grass if you wanted it to - Comes with spare side panel and 2 wheels and arms (1 new ) - Good straight mower ready to work

2.45M Cutting width - hydraulic side shift - c/w rear roller

4m working width - Hydraulic folding - Road lights - Ridge packer

2015 Dowdeswell 145 series MA 8 furrow Reversible Plough - ON land and in furrow - Manual vari-width - Rear disc - Depth and transport wheel

16HP V Twin Briggs and Stratton engine - Pull and key start - Recent new tyres - Very simple to adjust - 43'' cut - Off-set facility - Very little use - Surplus to requirements

Marked 1 - Used for less than 100 loads since new - 1 owner from new - C/w PTO shaft - Hydraulic lid - Tyres with good tread - Lights working - Paint still in barrel and on lip - Good paint & flails - Dry stored - This lot is part of a genuine dispersal due to bereavement. All lots are available to view & collect by appointment with the vendors.

Marked 2 - C/w 2 hopper extensions - C/w PTO shaft - C/w roll-over cover - Lights present - 18m-24m, headland shut-off - Dry stored - No rust - This lot is part of a genuine dispersal due to bereavement. All lots are available to view & collect by appointment with the vendors.

Cable controls - 3 point linkage - Good condition - F10H flails on 1.2m head - Used last season - Working order when parked up - PTO present but cover damaged - Transport lock missing

Pneumatic DL - C/w disc markers - Pipe work appears in good order - C/w PTO - Tyres have good tread and holding air - 3 point linkage or A frame mounted - C/w ESC control box - Hopper solid - Used last year - Barn stored

Pigtail tines (all present) - Depth wheels missing bar one - Manual fold - 9' folded - 13' working width - Useable condition

Galvanised frame - Rubber good - Has a weld on frame - 2m wide

Piggy back pneumatic DA Drill - C/w lights (untested) - Hydraulic bout markers - Electric box - With stands

Wam Group bulk solids auger - Very good condition - Only done 350 hours from new

C/w PTO - Used on 19/09/2026 - Working order - C/w PTO for piggy back drill - C/w rear packer roller - C/w levelling bar - Tines have some wearing metal left - No holes in bed - For sale due to upgrade

4 tyres holding air - All arms and tines present - Tidy central skirt - C/w front prop - C/w PTO shaft - 4.2M working - Always dry stored

C/w PTO shaft - Some previous repairs as pictured - Good flails - Not used this season but put away working - Contractor with own machine employed this year instead - Vendor has a 75HP tractor which may be able to assist with loading - If required, loading with a telehandler may be possible by arrangement - Viewings and enquiries welcome

Heavy duty ballast roller - Roller currently full - 8' Working width - C/w filling bungs - Loading available

Lights untested - C/w PTO shaft - Weigh display screen not currently working - Tyres average condition - Serial number: MF32A259

58'' cutting width - Full working order - C/w spare hydraulic mower - Viewings and enquiries welcome

C/w PTO shaft - 3 point linkage - Serial No: 01ND99 - One owner from new - Good working order - Semi independent hydraulics, cable controls - Used this year and can be seen working - Head runs smooth and quiet - Has instruction manual - PTO guard needs attention - Loading available

Working - Low use

8'' woodchipper, single hydraulic feed roller - Barn stored - Low use and working when last used

C/w PTO shaft - Tidy for age - Still on original tines - Some tines missing - Genuine dispersal due to relinquishing farm tenancy.

C/w PTO shaft - 3 point linkage - Manual control type - T flails - Serial NO. 11PA18 - Owned for 10+ years - Reluctant sale - New drive hub and 6 spline drive couplings - New head bearings and rotor balance this year - Lift ram seals done in 2024 - New hydraulic oil in 2026 - Flails only part worn on one side - Only done 100 acres per year since current owner has had it - Used in 2026.

Serial No: 1255 - 2.5m working width - C/w PTO - Good machine - Strong and well built - Not done much work - Loading available

3.5m cutting width - C/w PTO shaft - No grass conditioner - GWO - Tidy for age - Genuine dispersal due to relinquishing farm tenancy.

Serial No: RABu85 - 3 point linkage - C/w PTO shaft - Lights working - 6.5m maximum reach - Revolution controls (touchscreen and joystick) - Serviced and working - Hammer flails - Good machine - Too much for the vendors acreage now - Telescopic plus orbital head - No head vibration at all - Only done 240 rotor hours, will go up a bit as vendor has a couple fields left to do

Twin axle - Good bearings and chains - Tub is in good condition and lid has been rebuilt this year - Brakes working

Spares or repairs - 23.1-26 tyres (one recent new one) - Slurry door - Sprung axle - Lights and brakes present (untested) - PTO shaft and cover intact - Bed chains look good - Present owner has owned it since 2015 only been used to spread wood chip 4 times a year - Used recently until floor drive gearbox packed up, otherwise, everything else in working order - Very tidy for year - Replaced with new model

3M wide working width - Crumbler roller - Good tines - 1 slight oil leak - Working order, has A frame to fit piggyback drill (see lot 733) - Used recently

Electric box - Hydraulic bout markers - Some pipes perished, needs replacing - Usable condition, was working when last used -

Age unknown - C/w PTO shaft - Lights untested - C/w working electric weigh display - 16 cubic meters - Serial No: 27947 - Tyres are like new - Blade in good used condition - All working and is used on a daily basis - Draw bar sensor needs replacing

In running order but wiring work is needed, 2 control boxes are included - Has been dry stored

PTO driven - C/w PTO - C/w 9 canvases odd one has hole and repairs - Right hand cut - Working when last used in 2023 - Knotters working when last used - Rollers in good order - Levers all free and working - For sale due to ill health

Original implements silo push buckrake - Not used until 2019 - 9' wide push off - Hardex tines - Lights working order - Heavy duty - Recently used

Serial No: 1061134 - Early 90s - 2.5' bale size - 2.5' pick up width - C/w control - C/w PTO shaft - Barn stored always - Not used for 10 years - New hydraulic pipes fitted and wide angle PTO fitted

SN: S-6854-AD22 - Trailed - Lights working - Swivel shute - Electrical control box - Tyres in good condition - Bought new & regularly greased & serviced - Always been barn stored - Purchased for a small suckler herd to make my fathers job easier - Not done a lot of work - Good condition

C/w PTO shaft - Lights working - C/w working electric weigh display - Serial No: 2274 - 16 cubic meters capacity - 4 blades are missing but remaining blades are in good used condition - Tyres all in good condition - Has not been used this year - Had new weigh bar sensors installed 2 years ago

Hydraulic vari width - Knock on points - Shear bolt - Good straight plough ready to go to work

Serial No: 604104 - 6m working width - Hydraulic folding - Good set of galvanised 8mm tines with none broken or missing - C/w Opico Air 8 seeder - Electric controls - Tank agitator - C/w calibration tray/charts, operators manuals and wiring for tractor etc - Seeder is newer than harrows - Used this season and worked well

Serial number: C1867 - C/w PTO shaft - Grass conditioner - Cutting width of 2.8m - Two new skids fitted this year - Many new nylon conditioner tines fitted - Bed oils checked - New PTO guard fitted - Good skirt - C/w spare set of blades and manual - Worked well when last used - Loading available

SN: 1051 - Lights working - C/w PTO shaft - Working electrical weigh display - Could do with new blades - Has crack on side walls of tyres - Bought as a back up machine but never needed to use it - Now for sale as planning on purchasing a new one.

Serial number: 11492 - 800/65 R32 Tyres - 11,000 litre pump - Hydraulic brakes - hydraulic changeover - Swivel hitch - C/w PTO shaft - Lights and brakes working

Believed to be 1980's - 1.2m head working width - 4.5m maximum reach - Cable controls - C/w PTO shaft - J flails - Fully independent hydraulics - Loading available

Mounted - Good working order - C/w PTO shaft

3 point linkage - Good working order

C/w PTO shaft - Good working order - Loading available

C/w PTO shaft - Lights and brakes not working - Good condition for age - No rust holes - Can be worked by a small tractor

3 point linkage - In working order

Working order when removed in December 2025 for farm sale

2013 Pottinger Novacat H ED Mower Conditioner - 10' cutting width - Serial No: VBP00021003001264 - Good condition - Used this season - Can be transported upright or straight behind - C/w PTO shaft

4' head working width - 5.5m maximum reach - 3 point linkage - C/w PTO shaft - Lights working - Joystick control - T flails - Serial No: S114694 - Vendor has owned for last 6 years - Can be loaded onto a car trailer - Runs well - For sale due to the vendor buying a newer machine with more reach

Year, make and model unknown - No loading available

Has done light work and been on same farm most of its life - Always dry stored - C/w PTO - Last used 2 years ago - Good working order - 3.2 metres working width