Search

5' wide x 18' long - 3 phase - Adjustable speed - Adjustable legs - Very good condition - Was bespoke made in 2006 - This lot is part of a genuine reduction sale due to the vendor having ceased potato and onion production. Any viewing welcome by appointment with the vendor.

6' wide belt - Adjustable legs - 3 phase - Discharge conveyor 4.8m long x 105cm wide - This lot is part of a genuine reduction sale due to the vendor having ceased potato and onion production. Any viewing welcome by appointment with the vendor.

Both takes 4' wide screen with 3' discharge conveyors - One is 8' long - One is 6'9'' long - 3 phase - Working order - Both on double platform - No screens included - This lot is part of a genuine reduction sale due to the vendor having ceased potato and onion production. Any viewing welcome by appointment with the vendor.

Model 505XLM - Serial No: 42021 - Mounted linkage - Remote control - Has swivel shute - One owner from new - Has been used for bedding poultry shed and is in good condition - 2 spare screens on different sizes - Will blow chopped straw up to 80m using detachable pipes that are included - Fitted with dust suppression system and wireless remote control

Auto reset legs - Direct drilling - No longer needed by the vendor

Trailed - Serial number: 1CC0630XPFX150056 - PTO shaft - 3.2m cutting width - Good condition - Barn stored - Fitted with new bolt on blades - Ready for work - Regular service each season - Loading available

New bearing included for propeller - Galvanised - Hydraulic lift - Some weld to control body - Working order

2023 SHELBOURNE REYNOLDS 18 POWER MIX PLUS DIET FEEDER - 18 cubic meters - Rear light board is in shed (not pictured) - Bought new on farm - Has only been used to feed 350 dairy cows in winter months for 3 seasons - Good working order - This lot is part of an ongoing dispersal. The vendor has ceased milking and is relinquishing the tenancy

Transpired 12m dribble bar - Serial No: 916394 - Hydraulic folding and locking - Hydraulic boom sectioning - Working flow meter - LED work lights - Storz coupling - Recent new lay flat pipes - Good working order

PTO guard loose - Ready for work - Had new beaters and plates on all chains only had one days use since - On flotation tyres - Some surface rust but barrel is solid - New PTO shaft 2 years ago

3 point linkage - 150kg - Loading available onto a trailer or similar - Serial No: CRH 7064 - The guard in the picture is not included

C/w half worn 500mm diamond disc - Fitted with Honda 6.5hp engine - Good working order including water dispenser

Hydraulic drawbar - electric joystick controls - tyres holding air - c/w pick up hitch - electric spout - PTO cover needs alteration - Working order when last used 5 years ago - Barn Stored

2.45M Cutting width - hydraulic side shift - c/w rear roller

C/w grass conditioner - 10' working width - C/w PTO shaft - Good working order - Used up until now with no problems

8' working width - C/w PTO - Loading available - Good working order - Used to date - Some front guard flaps missing - can be front or rear mounted - hydraulic side shift

5 furrow - Slatted boards

4m working width - C/w control box and tramline kit - Working condition - Springs were removed for grass seeds

Belt Baler - String Only - C/w PTO Shaft - Last used 2 years ago. Put away in working order and kept as a back up. - Owned for approx 15 years - 1 rear deflector damaged - C/w front prop - C/w control box and some spare belts

Piggy-back drill on A-frame - Hydraulic markers (slight rust spots on rams) - Lights present but not tested - Extension hopper - C/w control box -

C/w crumbler roller - Discs in good condition - Plenty of wear left

S/N-82883 - Metal work good - New set of reversible points - Hydraulic width adjustment - Land wheel - Full set of skims - Very good condition

2011 Kverneland Accord DA Power harrow drill combination - 3m combination drill - PTO present - Kverneland NGH 301 Power harrow - Good tines, no oil leaks, packer roller - C/w Accord DA drill - Good coulters, following harrow tines - Extension hopper - Electric control box - Hydraulic bout markers - Very good condition (little use)

Tyres good, holding air - Lights need attention - Hydraulic folding into transport width - Plenty of wear still on discs - Very heavy duty - Hydraulic pipes have some perishing

Tyres holding air - 540 PTO shaft (some guards need attention) - Has had some repairs/plating to frame - Used recently - Some rust/corrosion - Hydraulic fold

Remote control - Auto cut off - 750mm film dispenser - 3 point linkage mounted

Pneumatic DL - C/w disc markers - Pipe work appears in good order - C/w PTO - Tyres have good tread and holding air - 3 point linkage or A frame mounted - C/w ESC control box - Hopper solid - Used last year - Barn stored

C/w PTO - Only used for straw - C/w control box - Working order - Lights need replacing - Some damage to front corner which has been fixed - C/w manual - Knives in reasonable condition - Swivel schute - Used on a beef and sheep farm - For sale due to reducing livestock - Tyres have good tread and holding air

Never been used - Sat in yard from new - 9m working width - Hydraulic valves - Coupling for umbilical cord - Can be tanker mounted - Rubber boots - Bent spring on one valve

Owned from new - Hydraulic axle - All tyres good and holding air - 4 rotor rake - Electric control box - 12.5m working width - Hydraulic brakes - Lights all working order - All guards present - All good tines - No welds visible - Has had a complete set of new tines this season

Serial No: 123185 - 1.8m cut - Hammer flails - Adjustable offset - Rear roller - Runs very smoothly having done little work - Paint still on rotor and back of flails - Only been used a few times from new and sold due to changing tractor and needing wider machine

Joystick controls with cable stop start - One owner/farmer from new - Always dry stored - Oil cooler - 500 rpm gearbox - Light kit - Good set of T flails - Good and tight on all pins and bushes - Has not seen hard work - Runs well and quiet with no vibrations - C/w power leads to control box - Loading availble

1,350L capacity - Serial No: 5362 - Disc spreader - Hydraulic shut off - In good condition - Been stored indoors

In good working order - Plenty of wear still left on slitters - Good bearings - Good strong solid frame - Ready to go straight to work

C/w 7 x 50mm wrap - C/w control box - Cable control - Mechanical knife - Electric counter (not original) - Unknown bale count - 4 new turn table belts last year - One new tyre last year - Used this season

Twin axle - Good bearings and chains - Tub is in good condition and lid has been rebuilt this year - Brakes working

In running order but wiring work is needed, 2 control boxes are included - Has been dry stored

4' cutting width - Working order - Battery needs replacing

Serial No: 1244 - 5.5m working width - C/w PTO shaft - Believed to be made in early 2000's - Loading available - Good old usable machine only for sale as bought a six rotor machine - No known faults has usual wear for an old machine - Bit of play in rotors but does the job

3.5m cutting width - C/w PTO shaft - No grass conditioner - GWO - Very tidy for age

4m working width - Hydraulic folding - Road lights - Ridge packer

Wheel drive - Windrow kit - Dahlam rollers - Good working order

2015 Dowdeswell 145 series MA 8 furrow Reversible Plough - ON land and in furrow - Manual vari-width - Rear disc - Depth and transport wheel

Owned from new (had little use, approx 100 acres) - 2.85m working width - Hydraulic side shift - PTO guard intact - Y flails

C/w slurry door - 18.4-34 tyres (holding air) - Lights present but untested - Brakes in working order - Some welds in places - All new sprockets and bearings in 2021 some new slats - Working order - Recently in use - Generally good condition

Spares or repairs - 6.8m working width - S/N: 60301466 - PTO shaft - Slip clutch needs attention - Recently some new tyres, rims and bearings - New hitch - Good hydraulic hoses - Manual width adjustment

PTO shaft - S/N: A 75464 - Holes/rust in lid - Unused for 2 years - Tyres need inflating

Serial No: 3103271 - Owned by vendor for last 4 years - For sale due to upgrade on tractor and need a larger topper

Vari diamant - Reversible - S/N: 246 171 - Has had previous repairs - Good working order - C/W spares

2009 AMAZONE ZAM 1500 FERTILISER SPREADER - 3000L - S/N: 0058981 - Hydraulic shut off - Rusty chassis - Good working order - 24 36 meter discs

S/N: 864912 - PTO shaft - In good working order - Used last year

Supplied by P Cowell & Sons (Lancashire) - S/N: U045834 - Never used - Barn stored - All parts present, including PTO shaft - Never wired in

Good condition

Hydraulic side shift - Front or rear mounted - Tree flails - 2.2M cutting width - PTO guard intact - Rear roller - Working order - Used recently

Fitted with 2014 Pichon Rampe 12m dribble bar - Self loading arm - Good tyres 650/65 R30.5 - Galvanised tank - Fitted slope control kit and weight transfer - Holds 3,500 gallon approx - Hydraulic brakes and air - Lights present - Rear steer - 80mm ball hitch - 13,800L/min 1000rpm vacuum pump - Has had very little use

1.2m working width - 5.5m maximum reach - C/w PTO shaft - 3 point linkage - Lights working - Electric joystick control - Serial No: M1435467 - Orbital head - In used working condition - Was purchased in a previous Stags sale - Machine too big for vendors requirements

Serial No: 881435179 - Vendor has owned from new - Selling due to upgrade two years ago and no longer used - Had crack in frame and repaired by Dunns ploughs - Has lived indoors all its life - Tidy for age

PTO driven - C/w PTO - C/w 9 canvasas odd one has hole and repairs - Right hand cut - Working when last used in 2023 - Knotters working when last used - Rollers in good order - Levers all free and working - For sale due to ill health

Kuhn GF 6401MH Digidrive - Working order - Sale due to upgrade - Hydraulic folding - All tines present - C/w PTO shaft (new guard needs to be fitted before use) - Tyres holding air

Model: Servo 45 - Auto reset - Hydraulic vari-width - Slatted mole boards - Good wearing metal - Sale due to change of policy to min-till - No welds on main frame or headstock, some previous repairs on Land Wheel & Vari-Width - No Cracks or Bends

116,000 Bale Count - Good Working Order - Well Maintained - 4 String - Isobus or Control Box/Screen - Full Knives (Never Used) - BKT tyres have good tread - Auto Lube & Auto Grease - Barn Stored

Wrap count unknown - C/w Control Box - Tyres have good tread - Used this year - Well Maintained - Barn Stored - C/w PTO - Linkage Mounted

Used this year - Hydraulic tailgate and bale eject - Bales are 80 x 70 (4 string) - 89,649 bales on bale count - Good working order

350kg weight - Owned from new - Power swing - Done very little work - 10' mast - 2019 model - Hydraulic rams & pipes in very good condition

6.5m telescopic reach - 1.2m head - Joystick controls - Lights partially working - Working order - Only for sale due to upgrade

Tyres soft on depth wheels - Small leak on chain drive - 8' wide - Can be loaded